sh: rework ipr code

This patch reworks the ipr code by grouping the offset array together
with the ipr_data structure in a new data structure called ipr_desc.
This new structure also contains the name of the controller in struct
irq_chip. The idea behind putting struct irq_chip in there is that we
can use offsetof() to locate the base addresses in the irq_chip
callbacks. This strategy has much in common with the recently merged
intc2 code.

One logic change has been made - the original ipr code enabled the
interrupts by default but with this patch they are all disabled by
default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 23 insertions, 38 deletions

diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
index f9dfdc0..4ca3f76 100644
--- a/include/asm-sh/hw_irq.h
+++ b/include/asm-sh/hw_irq.h
@@ -24,4 +24,27 @@ struct intc2_desc {
 void register_intc2_controller(struct intc2_desc *);
 void init_IRQ_intc2(void);
 
+struct ipr_data {
+	unsigned char irq;
+	unsigned char ipr_idx;		/* Index for the IPR registered */
+	unsigned char shift;		/* Number of bits to shift the data */
+	unsigned char priority;		/* The priority */
+};
+
+struct ipr_desc {
+	unsigned long *ipr_offsets;
+	unsigned int nr_offsets;
+	struct ipr_data *ipr_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+void init_IRQ_ipr(void);
+
+/*
+ * Enable individual interrupt mode for external IPR IRQs.
+ */
+void ipr_irq_enable_irlm(void);
+
 #endif /* __ASM_SH_HW_IRQ_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index c247b73..c61d902 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -31,37 +31,7 @@ extern unsigned short *irq_mask_register;
  * PINT IRQs
  */
 void init_IRQ_pint(void);
-
-/*
- * The shift value is now the number of bits to shift, not the number of
- * bits/4. This is to make it easier to read the value directly from the
- * datasheets. The IPR address, addr, will be set from ipr_idx via the
- * map_ipridx_to_addr function.
- */
-struct ipr_data {
-	unsigned int irq;
-	int ipr_idx;		/* Index for the IPR registered */
-	int shift;		/* Number of bits to shift the data */
-	int priority;		/* The priority */
-	unsigned int addr;	/* Address of Interrupt Priority Register */
-};
-
-/*
- * Given an IPR IDX, map the value to an IPR register address.
- */
-unsigned int map_ipridx_to_addr(int idx);
-
-/*
- * Enable individual interrupt mode for external IPR IRQs.
- */
-void ipr_irq_enable_irlm(void);
-
-/*
- * Function for "on chip support modules".
- */
-void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
 void make_imask_irq(unsigned int irq);
-void init_IRQ_ipr(void);
 
 static inline int generic_irq_demux(int irq)
 {
diff --git a/include/asm-sh/sh03/io.h b/include/asm-sh/sh03/io.h
index df3b187..4ff1eb9 100644
--- a/include/asm-sh/sh03/io.h
+++ b/include/asm-sh/sh03/io.h
@@ -14,22 +14,18 @@
 #define INTC_IPRD	0xffd00010UL
 
 #define IRL0_IRQ	2
-#define IRL0_IPR_ADDR	INTC_IPRD
 #define IRL0_IPR_POS	3
 #define IRL0_PRIORITY	13
 
 #define IRL1_IRQ	5
-#define IRL1_IPR_ADDR	INTC_IPRD
 #define IRL1_IPR_POS	2
 #define IRL1_PRIORITY	10
 
 #define IRL2_IRQ	8
-#define IRL2_IPR_ADDR	INTC_IPRD
 #define IRL2_IPR_POS	1
 #define IRL2_PRIORITY	7
 
 #define IRL3_IRQ	11
-#define IRL3_IPR_ADDR	INTC_IPRD
 #define IRL3_IPR_POS	0
 #define IRL3_PRIORITY	4
 
diff --git a/include/asm-sh/snapgear.h b/include/asm-sh/snapgear.h
index 2d712e7..3554e3a 100644
--- a/include/asm-sh/snapgear.h
+++ b/include/asm-sh/snapgear.h
@@ -20,22 +20,18 @@
  */
 
 #define IRL0_IRQ		2
-#define IRL0_IPR_ADDR	INTC_IPRD
 #define IRL0_IPR_POS	3
 #define IRL0_PRIORITY	13
 
 #define IRL1_IRQ		5
-#define IRL1_IPR_ADDR	INTC_IPRD
 #define IRL1_IPR_POS	2
 #define IRL1_PRIORITY	10
 
 #define IRL2_IRQ		8
-#define IRL2_IPR_ADDR	INTC_IPRD
 #define IRL2_IPR_POS	1
 #define IRL2_PRIORITY	7
 
 #define IRL3_IRQ		11
-#define IRL3_IPR_ADDR	INTC_IPRD
 #define IRL3_IPR_POS	0
 #define IRL3_PRIORITY	4
 #endif