Merge tag 'usb-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.17 merge window

Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).

The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.

Signed-of-by: Felipe Balbi <balbi@ti.com>

4 files changed, 300 insertions, 2 deletions

diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 7373203..c330f5e 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -386,6 +386,21 @@ struct usb_composite_driver {
 
 extern int usb_composite_probe(struct usb_composite_driver *driver);
 extern void usb_composite_unregister(struct usb_composite_driver *driver);
+
+/**
+ * module_usb_composite_driver() - Helper macro for registering a USB gadget
+ * composite driver
+ * @__usb_composite_driver: usb_composite_driver struct
+ *
+ * Helper macro for USB gadget composite drivers which do not do anything
+ * special in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_usb_composite_driver(__usb_composite_driver) \
+	module_driver(__usb_composite_driver, usb_composite_probe, \
+		       usb_composite_unregister)
+
 extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
 extern int composite_dev_prepare(struct usb_composite_driver *composite,
 		struct usb_composite_dev *cdev);
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index e452ba6..d5952bb 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -153,6 +153,9 @@ struct renesas_usbhs_driver_param {
 	 */
 	int pio_dma_border; /* default is 64byte */
 
+	u32 type;
+	u32 enable_gpio;
+
 	/*
 	 * option:
 	 */
@@ -160,6 +163,9 @@ struct renesas_usbhs_driver_param {
 	u32 has_sudmac:1; /* for SUDMAC */
 };
 
+#define USBHS_TYPE_R8A7790 1
+#define USBHS_TYPE_R8A7791 2
+
 /*
  * option:
  *
diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h
new file mode 100644
index 0000000..f92eb63
--- /dev/null
+++ b/include/linux/usb/usb338x.h
@@ -0,0 +1,199 @@
+/*
+ * USB 338x super/high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ *
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_USB338X_H
+#define __LINUX_USB_USB338X_H
+
+#include <linux/usb/net2280.h>
+
+/*
+ * Extra defined bits for net2280 registers
+ */
+#define     SCRATCH			      0x0b
+
+#define     DEFECT7374_FSM_FIELD                28
+#define     SUPER_SPEED				 8
+#define     DMA_REQUEST_OUTSTANDING              5
+#define     DMA_PAUSE_DONE_INTERRUPT            26
+#define     SET_ISOCHRONOUS_DELAY               24
+#define     SET_SEL                             22
+#define     SUPER_SPEED_MODE                     8
+
+/*ep_cfg*/
+#define     MAX_BURST_SIZE                      24
+#define     EP_FIFO_BYTE_COUNT                  16
+#define     IN_ENDPOINT_ENABLE                  14
+#define     IN_ENDPOINT_TYPE                    12
+#define     OUT_ENDPOINT_ENABLE                 10
+#define     OUT_ENDPOINT_TYPE                    8
+
+struct usb338x_usb_ext_regs {
+	u32     usbclass;
+#define     DEVICE_PROTOCOL                     16
+#define     DEVICE_SUB_CLASS                     8
+#define     DEVICE_CLASS                         0
+	u32     ss_sel;
+#define     U2_SYSTEM_EXIT_LATENCY               8
+#define     U1_SYSTEM_EXIT_LATENCY               0
+	u32     ss_del;
+#define     U2_DEVICE_EXIT_LATENCY               8
+#define     U1_DEVICE_EXIT_LATENCY               0
+	u32     usb2lpm;
+#define     USB_L1_LPM_HIRD                      2
+#define     USB_L1_LPM_REMOTE_WAKE               1
+#define     USB_L1_LPM_SUPPORT                   0
+	u32     usb3belt;
+#define     BELT_MULTIPLIER                     10
+#define     BEST_EFFORT_LATENCY_TOLERANCE        0
+	u32     usbctl2;
+#define     LTM_ENABLE                           7
+#define     U2_ENABLE                            6
+#define     U1_ENABLE                            5
+#define     FUNCTION_SUSPEND                     4
+#define     USB3_CORE_ENABLE                     3
+#define     USB2_CORE_ENABLE                     2
+#define     SERIAL_NUMBER_STRING_ENABLE          0
+	u32     in_timeout;
+#define     GPEP3_TIMEOUT                       19
+#define     GPEP2_TIMEOUT                       18
+#define     GPEP1_TIMEOUT                       17
+#define     GPEP0_TIMEOUT                       16
+#define     GPEP3_TIMEOUT_VALUE                 13
+#define     GPEP3_TIMEOUT_ENABLE                12
+#define     GPEP2_TIMEOUT_VALUE                  9
+#define     GPEP2_TIMEOUT_ENABLE                 8
+#define     GPEP1_TIMEOUT_VALUE                  5
+#define     GPEP1_TIMEOUT_ENABLE                 4
+#define     GPEP0_TIMEOUT_VALUE                  1
+#define     GPEP0_TIMEOUT_ENABLE                 0
+	u32     isodelay;
+#define     ISOCHRONOUS_DELAY                    0
+} __packed;
+
+struct usb338x_fifo_regs {
+	/* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
+	u32     ep_fifo_size_base;
+#define     IN_FIFO_BASE_ADDRESS                                22
+#define     IN_FIFO_SIZE                                        16
+#define     OUT_FIFO_BASE_ADDRESS                               6
+#define     OUT_FIFO_SIZE                                       0
+	u32     ep_fifo_out_wrptr;
+	u32     ep_fifo_out_rdptr;
+	u32     ep_fifo_in_wrptr;
+	u32     ep_fifo_in_rdptr;
+	u32     unused[3];
+} __packed;
+
+
+/* Link layer */
+struct usb338x_ll_regs {
+	/* offset 0x700 */
+	u32   ll_ltssm_ctrl1;
+	u32   ll_ltssm_ctrl2;
+	u32   ll_ltssm_ctrl3;
+	u32   unused[2];
+	u32   ll_general_ctrl0;
+	u32   ll_general_ctrl1;
+#define     PM_U3_AUTO_EXIT                                     29
+#define     PM_U2_AUTO_EXIT                                     28
+#define     PM_U1_AUTO_EXIT                                     27
+#define     PM_FORCE_U2_ENTRY                                   26
+#define     PM_FORCE_U1_ENTRY                                   25
+#define     PM_LGO_COLLISION_SEND_LAU                           24
+#define     PM_DIR_LINK_REJECT                                  23
+#define     PM_FORCE_LINK_ACCEPT                                22
+#define     PM_DIR_ENTRY_U3                                     20
+#define     PM_DIR_ENTRY_U2                                     19
+#define     PM_DIR_ENTRY_U1                                     18
+#define     PM_U2_ENABLE                                        17
+#define     PM_U1_ENABLE                                        16
+#define     SKP_THRESHOLD_ADJUST_FMW                            8
+#define     RESEND_DPP_ON_LRTY_FMW                              7
+#define     DL_BIT_VALUE_FMW                                    6
+#define     FORCE_DL_BIT                                        5
+	u32   ll_general_ctrl2;
+#define     SELECT_INVERT_LANE_POLARITY                         7
+#define     FORCE_INVERT_LANE_POLARITY                          6
+	u32   ll_general_ctrl3;
+	u32   ll_general_ctrl4;
+	u32   ll_error_gen;
+} __packed;
+
+struct usb338x_ll_lfps_regs {
+	/* offset 0x748 */
+	u32   ll_lfps_5;
+#define     TIMER_LFPS_6US                                      16
+	u32   ll_lfps_6;
+#define     TIMER_LFPS_80US                                     0
+} __packed;
+
+struct usb338x_ll_tsn_regs {
+	/* offset 0x77C */
+	u32   ll_tsn_counters_2;
+#define     HOT_TX_NORESET_TS2                                  24
+	u32   ll_tsn_counters_3;
+#define     HOT_RX_RESET_TS2                                    0
+} __packed;
+
+struct usb338x_ll_chi_regs {
+	/* offset 0x79C */
+	u32   ll_tsn_chicken_bit;
+#define     RECOVERY_IDLE_TO_RECOVER_FMW                        3
+} __packed;
+
+/* protocol layer */
+struct usb338x_pl_regs {
+	/* offset 0x800 */
+	u32   pl_reg_1;
+	u32   pl_reg_2;
+	u32   pl_reg_3;
+	u32   pl_reg_4;
+	u32   pl_ep_ctrl;
+	/* Protocol Layer Endpoint Control*/
+#define     PL_EP_CTRL                                  0x810
+#define     ENDPOINT_SELECT                             0
+	/* [4:0] */
+#define     EP_INITIALIZED                              16
+#define     SEQUENCE_NUMBER_RESET                       17
+#define     CLEAR_ACK_ERROR_CODE                        20
+	u32   pl_reg_6;
+	u32   pl_reg_7;
+	u32   pl_reg_8;
+	u32   pl_ep_status_1;
+	/* Protocol Layer Endpoint Status 1*/
+#define     PL_EP_STATUS_1                              0x820
+#define     STATE                                       16
+#define     ACK_GOOD_NORMAL                             0x11
+#define     ACK_GOOD_MORE_ACKS_TO_COME                  0x16
+	u32   pl_ep_status_2;
+	u32   pl_ep_status_3;
+	/* Protocol Layer Endpoint Status 3*/
+#define     PL_EP_STATUS_3                              0x828
+#define     SEQUENCE_NUMBER                             0
+	u32   pl_ep_status_4;
+	/* Protocol Layer Endpoint Status 4*/
+#define     PL_EP_STATUS_4                              0x82c
+	u32   pl_ep_cfg_4;
+	/* Protocol Layer Endpoint Configuration 4*/
+#define     PL_EP_CFG_4                                 0x830
+#define     NON_CTRL_IN_TOLERATE_BAD_DIR                6
+} __packed;
+
+#endif /* __LINUX_USB_USB338X_H */
diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h
index 24b68c5..0154b28 100644
--- a/include/uapi/linux/usb/functionfs.h
+++ b/include/uapi/linux/usb/functionfs.h
@@ -18,10 +18,9 @@ enum functionfs_flags {
 	FUNCTIONFS_HAS_FS_DESC = 1,
 	FUNCTIONFS_HAS_HS_DESC = 2,
 	FUNCTIONFS_HAS_SS_DESC = 4,
+	FUNCTIONFS_HAS_MS_OS_DESC = 8,
 };
 
-#ifndef __KERNEL__
-
 /* Descriptor of an non-audio endpoint */
 struct usb_endpoint_descriptor_no_audio {
 	__u8  bLength;
@@ -41,6 +40,37 @@ struct usb_functionfs_descs_head {
 	__le32 hs_count;
 } __attribute__((packed, deprecated));
 
+/* MS OS Descriptor header */
+struct usb_os_desc_header {
+	__u8	interface;
+	__le32	dwLength;
+	__le16	bcdVersion;
+	__le16	wIndex;
+	union {
+		struct {
+			__u8	bCount;
+			__u8	Reserved;
+		};
+		__le16	wCount;
+	};
+} __attribute__((packed));
+
+struct usb_ext_compat_desc {
+	__u8	bFirstInterfaceNumber;
+	__u8	Reserved1;
+	__u8	CompatibleID[8];
+	__u8	SubCompatibleID[8];
+	__u8	Reserved2[6];
+};
+
+struct usb_ext_prop_desc {
+	__le32	dwSize;
+	__le32	dwPropertyDataType;
+	__le16	wPropertyNameLength;
+} __attribute__((packed));
+
+#ifndef __KERNEL__
+
 /*
  * Descriptors format:
  *
@@ -52,9 +82,11 @@ struct usb_functionfs_descs_head {
  * |     | fs_count  | LE32         | number of full-speed descriptors     |
  * |     | hs_count  | LE32         | number of high-speed descriptors     |
  * |     | ss_count  | LE32         | number of super-speed descriptors    |
+ * |     | os_count  | LE32         | number of MS OS descriptors          |
  * |     | fs_descrs | Descriptor[] | list of full-speed descriptors       |
  * |     | hs_descrs | Descriptor[] | list of high-speed descriptors       |
  * |     | ss_descrs | Descriptor[] | list of super-speed descriptors      |
+ * |     | os_descrs | OSDesc[]     | list of MS OS descriptors            |
  *
  * Depending on which flags are set, various fields may be missing in the
  * structure.  Any flags that are not recognised cause the whole block to be
@@ -81,6 +113,52 @@ struct usb_functionfs_descs_head {
  * |   0 | bLength         | U8   | length of the descriptor |
  * |   1 | bDescriptorType | U8   | descriptor type          |
  * |   2 | payload         |      | descriptor's payload     |
+ *
+ * OSDesc[] is an array of valid MS OS Feature Descriptors which have one of
+ * the following formats:
+ *
+ * | off | name            | type | description              |
+ * |-----+-----------------+------+--------------------------|
+ * |   0 | inteface        | U8   | related interface number |
+ * |   1 | dwLength        | U32  | length of the descriptor |
+ * |   5 | bcdVersion      | U16  | currently supported: 1   |
+ * |   7 | wIndex          | U16  | currently supported: 4   |
+ * |   9 | bCount          | U8   | number of ext. compat.   |
+ * |  10 | Reserved        | U8   | 0                        |
+ * |  11 | ExtCompat[]     |      | list of ext. compat. d.  |
+ *
+ * | off | name            | type | description              |
+ * |-----+-----------------+------+--------------------------|
+ * |   0 | inteface        | U8   | related interface number |
+ * |   1 | dwLength        | U32  | length of the descriptor |
+ * |   5 | bcdVersion      | U16  | currently supported: 1   |
+ * |   7 | wIndex          | U16  | currently supported: 5   |
+ * |   9 | wCount          | U16  | number of ext. compat.   |
+ * |  11 | ExtProp[]       |      | list of ext. prop. d.    |
+ *
+ * ExtCompat[] is an array of valid Extended Compatiblity descriptors
+ * which have the following format:
+ *
+ * | off | name                  | type | description                         |
+ * |-----+-----------------------+------+-------------------------------------|
+ * |   0 | bFirstInterfaceNumber | U8   | index of the interface or of the 1st|
+ * |     |                       |      | interface in an IAD group           |
+ * |   1 | Reserved              | U8   | 0                                   |
+ * |   2 | CompatibleID          | U8[8]| compatible ID string                |
+ * |  10 | SubCompatibleID       | U8[8]| subcompatible ID string             |
+ * |  18 | Reserved              | U8[6]| 0                                   |
+ *
+ * ExtProp[] is an array of valid Extended Properties descriptors
+ * which have the following format:
+ *
+ * | off | name                  | type | description                         |
+ * |-----+-----------------------+------+-------------------------------------|
+ * |   0 | dwSize                | U32  | length of the descriptor            |
+ * |   4 | dwPropertyDataType    | U32  | 1..7                                |
+ * |   8 | wPropertyNameLength   | U16  | bPropertyName length (NL)           |
+ * |  10 | bPropertyName         |U8[NL]| name of this property               |
+ * |10+NL| dwPropertyDataLength  | U32  | bPropertyData length (DL)           |
+ * |14+NL| bProperty             |U8[DL]| payload of this property            |
  */
 
 struct usb_functionfs_strings_head {