media: dmx.h: add kernel-doc markups and use it at Documentation/

The demux documentation is pretty poor nowadays: most of the
structs and enums aren't documented at all.

Add proper kernel-doc markups for them and use it.

Now, the demux API data structures are fully documented :-)

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 114 insertions, 25 deletions

diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h
index 08dc170..4e3f3a2 100644
--- a/include/uapi/linux/dvb/dmx.h
+++ b/include/uapi/linux/dvb/dmx.h
@@ -32,26 +32,74 @@
 
 #define DMX_FILTER_SIZE 16
 
-enum dmx_output
-{
-	DMX_OUT_DECODER, /* Streaming directly to decoder. */
-	DMX_OUT_TAP,     /* Output going to a memory buffer */
-			 /* (to be retrieved via the read command).*/
-	DMX_OUT_TS_TAP,  /* Output multiplexed into a new TS  */
-			 /* (to be retrieved by reading from the */
-			 /* logical DVR device).                 */
-	DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
+/**
+ * enum dmx_output - Output for the demux.
+ *
+ * @DMX_OUT_DECODER:
+ *	Streaming directly to decoder.
+ * @DMX_OUT_TAP:
+ *	Output going to a memory buffer (to be retrieved via the read command).
+ *	Delivers the stream output to the demux device on which the ioctl
+ *	is called.
+ * @DMX_OUT_TS_TAP:
+ *	Output multiplexed into a new TS (to be retrieved by reading from the
+ *	logical DVR device). Routes output to the logical DVR device
+ *	``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from all
+ *	filters for which @DMX_OUT_TS_TAP was specified.
+ * @DMX_OUT_TSDEMUX_TAP:
+ *	Like @DMX_OUT_TS_TAP but retrieved from the DMX device.
+ */
+enum dmx_output {
+	DMX_OUT_DECODER,
+	DMX_OUT_TAP,
+	DMX_OUT_TS_TAP,
+	DMX_OUT_TSDEMUX_TAP
 };
 
-enum dmx_input
-{
-	DMX_IN_FRONTEND, /* Input from a front-end device.  */
-	DMX_IN_DVR       /* Input from the logical DVR device.  */
+
+/**
+ * enum dmx_input - Input from the demux.
+ *
+ * @DMX_IN_FRONTEND:	Input from a front-end device.
+ * @DMX_IN_DVR:		Input from the logical DVR device.
+ */
+enum dmx_input {
+	DMX_IN_FRONTEND,
+	DMX_IN_DVR
 };
 
+/**
+ * enum dmx_ts_pes - type of the PES filter.
+ *
+ * @DMX_PES_AUDIO0:	first audio PID. Also referred as @DMX_PES_AUDIO.
+ * @DMX_PES_VIDEO0:	first video PID. Also referred as @DMX_PES_VIDEO.
+ * @DMX_PES_TELETEXT0:	first teletext PID. Also referred as @DMX_PES_TELETEXT.
+ * @DMX_PES_SUBTITLE0:	first subtitle PID. Also referred as @DMX_PES_SUBTITLE.
+ * @DMX_PES_PCR0:	first Program Clock Reference PID.
+ *			Also referred as @DMX_PES_PCR.
+ *
+ * @DMX_PES_AUDIO1:	second audio PID.
+ * @DMX_PES_VIDEO1:	second video PID.
+ * @DMX_PES_TELETEXT1:	second teletext PID.
+ * @DMX_PES_SUBTITLE1:	second subtitle PID.
+ * @DMX_PES_PCR1:	second Program Clock Reference PID.
+ *
+ * @DMX_PES_AUDIO2:	third audio PID.
+ * @DMX_PES_VIDEO2:	third video PID.
+ * @DMX_PES_TELETEXT2:	third teletext PID.
+ * @DMX_PES_SUBTITLE2:	third subtitle PID.
+ * @DMX_PES_PCR2:	third Program Clock Reference PID.
+ *
+ * @DMX_PES_AUDIO3:	fourth audio PID.
+ * @DMX_PES_VIDEO3:	fourth video PID.
+ * @DMX_PES_TELETEXT3:	fourth teletext PID.
+ * @DMX_PES_SUBTITLE3:	fourth subtitle PID.
+ * @DMX_PES_PCR3:	fourth Program Clock Reference PID.
+ *
+ * @DMX_PES_OTHER:	any other PID.
+ */
 
-enum dmx_ts_pes
-{
+enum dmx_ts_pes {
 	DMX_PES_AUDIO0,
 	DMX_PES_VIDEO0,
 	DMX_PES_TELETEXT0,
@@ -86,16 +134,42 @@ enum dmx_ts_pes
 #define DMX_PES_PCR      DMX_PES_PCR0
 
 
-struct dmx_filter
-{
+
+/**
+ * struct dmx_filter - Specifies a section header filter.
+ *
+ * @filter: bit array with bits to be matched at the section header.
+ * @mask: bits that are valid at the filter bit array.
+ * @mode: mode of match: if bit is zero, it will match if equal (positive
+ *	  match); if bit is one, it will match if the bit is negated.
+ *
+ * Note: All arrays in this struct have a size of DMX_FILTER_SIZE (16 bytes).
+ */
+struct dmx_filter {
 	__u8  filter[DMX_FILTER_SIZE];
 	__u8  mask[DMX_FILTER_SIZE];
 	__u8  mode[DMX_FILTER_SIZE];
 };
 
-
-struct dmx_sct_filter_params
-{
+/**
+ * struct dmx_sct_filter_params - Specifies a section filter.
+ *
+ * @pid: PID to be filtered.
+ * @filter: section header filter, as defined by &struct dmx_filter.
+ * @timeout: maximum time to filter, in milliseconds.
+ * @flags: extra flags for the section filter.
+ *
+ * Carries the configuration for a MPEG-TS section filter.
+ *
+ * The @flags can be:
+ *
+ *	- %DMX_CHECK_CRC - only deliver sections where the CRC check succeeded;
+ *	- %DMX_ONESHOT - disable the section filter after one section
+ *	  has been delivered;
+ *	- %DMX_IMMEDIATE_START - Start filter immediately without requiring a
+ *	  :ref:`DMX_START`.
+ */
+struct dmx_sct_filter_params {
 	__u16             pid;
 	struct dmx_filter filter;
 	__u32             timeout;
@@ -105,7 +179,16 @@ struct dmx_sct_filter_params
 #define DMX_IMMEDIATE_START 4
 };
 
-
+/**
+ * struct dmx_pes_filter_params - Specifies Packetized Elementary Stream (PES)
+ *	filter parameters.
+ *
+ * @pid:	PID to be filtered.
+ * @input:	Demux input, as specified by &enum dmx_input.
+ * @output:	Demux output, as specified by &enum dmx_output.
+ * @pes_type:	Type of the pes filter, as specified by &enum dmx_pes_type.
+ * @flags:	Demux PES flags.
+ */
 struct dmx_pes_filter_params
 {
 	__u16           pid;
@@ -115,11 +198,17 @@ struct dmx_pes_filter_params
 	__u32           flags;
 };
 
-
+/**
+ * struct dmx_stc - Stores System Time Counter (STC) information.
+ *
+ * @num: input data: number of the STC, from 0 to N.
+ * @base: output: divisor for STC to get 90 kHz clock.
+ * @stc: output: stc in @base * 90 kHz units.
+ */
 struct dmx_stc {
-	unsigned int num;	/* input : which STC? 0..N */
-	unsigned int base;	/* output: divisor for stc to get 90 kHz clock */
-	__u64 stc;		/* output: stc in 'base'*90 kHz units */
+	unsigned int num;
+	unsigned int base;
+	__u64 stc;
 };
 
 #define DMX_START                _IO('o', 41)