Move code that is used both by initiator and target drivers

Move the functions that are used by both the initiator and target
subsystems into scsi_common.c/.h. This change will allow to remove
the initiator SCSI header include directives from most SCSI target
source files in a later patch.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

4 files changed, 65 insertions, 51 deletions

diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index f238e6e..e0a3398 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -8,6 +8,7 @@
 #include <linux/types.h>
 #include <linux/scatterlist.h>
 #include <linux/kernel.h>
+#include <scsi/scsi_common.h>
 #include <scsi/scsi_proto.h>
 
 struct scsi_cmnd;
@@ -47,22 +48,6 @@ enum scsi_timeouts {
  */
 #define SCAN_WILD_CARD	~0
 
-static inline unsigned
-scsi_varlen_cdb_length(const void *hdr)
-{
-	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
-}
-
-extern const unsigned char scsi_command_size_tbl[8];
-#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
-
-static inline unsigned
-scsi_command_size(const unsigned char *cmnd)
-{
-	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
-		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
-}
-
 #ifdef CONFIG_ACPI
 struct acpi_bus_type;
 
@@ -96,8 +81,6 @@ static inline int scsi_status_is_good(int status)
 		(status == SAM_STAT_COMMAND_TERMINATED));
 }
 
-/* Returns a human-readable name for the device */
-extern const char * scsi_device_type(unsigned type);
 
 /*
  * standard mode-select header prepended to all mode-select commands
diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h
new file mode 100644
index 0000000..676b03b
--- /dev/null
+++ b/include/scsi/scsi_common.h
@@ -0,0 +1,64 @@
+/*
+ * Functions used by both the SCSI initiator code and the SCSI target code.
+ */
+
+#ifndef _SCSI_COMMON_H_
+#define _SCSI_COMMON_H_
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/* Returns a human-readable name for the device */
+extern const char *scsi_device_type(unsigned type);
+
+extern void int_to_scsilun(u64, struct scsi_lun *);
+extern u64 scsilun_to_int(struct scsi_lun *);
+
+/*
+ * This is a slightly modified SCSI sense "descriptor" format header.
+ * The addition is to allow the 0x70 and 0x71 response codes. The idea
+ * is to place the salient data from either "fixed" or "descriptor" sense
+ * format into one structure to ease application processing.
+ *
+ * The original sense buffer should be kept around for those cases
+ * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
+ */
+struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
+	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
+	u8 sense_key;
+	u8 asc;
+	u8 ascq;
+	u8 byte4;
+	u8 byte5;
+	u8 byte6;
+	u8 additional_length;	/* always 0 for fixed sense format */
+};
+
+static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr)
+{
+	if (!sshdr)
+		return false;
+
+	return (sshdr->response_code & 0x70) == 0x70;
+}
+
+extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+				 struct scsi_sense_hdr *sshdr);
+
+#endif /* _SCSI_COMMON_H_ */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index a4c9336..ae84b22 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -413,8 +413,6 @@ extern void scsi_target_reap(struct scsi_target *);
 extern void scsi_target_block(struct device *);
 extern void scsi_target_unblock(struct device *, enum scsi_device_state);
 extern void scsi_remove_target(struct device *);
-extern void int_to_scsilun(u64, struct scsi_lun *);
-extern u64 scsilun_to_int(struct scsi_lun *);
 extern const char *scsi_device_state_name(enum scsi_device_state);
 extern int scsi_is_sdev_device(const struct device *);
 extern int scsi_is_target_device(const struct device *);
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 5a4bb5b..4942710 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -7,43 +7,12 @@
 struct scsi_device;
 struct Scsi_Host;
 
-/*
- * This is a slightly modified SCSI sense "descriptor" format header.
- * The addition is to allow the 0x70 and 0x71 response codes. The idea
- * is to place the salient data from either "fixed" or "descriptor" sense
- * format into one structure to ease application processing.
- *
- * The original sense buffer should be kept around for those cases
- * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
- */
-struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
-	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
-	u8 sense_key;
-	u8 asc;
-	u8 ascq;
-	u8 byte4;
-	u8 byte5;
-	u8 byte6;
-	u8 additional_length;	/* always 0 for fixed sense format */
-};
-
-static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr)
-{
-	if (!sshdr)
-		return false;
-
-	return (sshdr->response_code & 0x70) == 0x70;
-}
-
-
 extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
 			       struct list_head *done_q);
 extern void scsi_eh_flush_done_q(struct list_head *done_q);
 extern void scsi_report_bus_reset(struct Scsi_Host *, int);
 extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
 extern int scsi_block_when_processing_errors(struct scsi_device *);
-extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
-				 struct scsi_sense_hdr *sshdr);
 extern bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
 					 struct scsi_sense_hdr *sshdr);