summaryrefslogtreecommitdiffstats
path: root/include/scsi
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2011-09-01 21:18:20 -0700
committerJames Bottomley <JBottomley@Parallels.com>2011-09-22 14:59:09 +0400
commit8ec6552f4a77d15f446b00aed364e3c12d38aa6c (patch)
treeefaa0dfc6479d28a14e5e778e8eb246ff94c360f /include/scsi
parent9c224ac21506d29f5a6ff4df0c4cc9f97484fa25 (diff)
downloadop-kernel-dev-8ec6552f4a77d15f446b00aed364e3c12d38aa6c.zip
op-kernel-dev-8ec6552f4a77d15f446b00aed364e3c12d38aa6c.tar.gz
[SCSI] libsas: sgpio write support
Add SFF-8485 v0.7 / SAS-1 smp-write-gpio register support to libsas. Defer SAS-2 support unless/until it defines an sgpio interface. Minimum implementation needed to get the lights blinking. try_test_sas_gpio_gp_bit() provides a common method to parse the incoming write data (raw bitstream), and the to_sas_gpio_gp_bit() helper routine can be used as a basis for the set/clear operations for the 'read' implementation. Host implementations parse as many bits (ODx.[012]) as are locally supported and report the number of registers successfully written. If the submitted data overruns the internal number of registers available report the write as a success with the number of bytes remaining reported in ->resid_len. Example (assuming an active backplane) set the "identify" pattern for the first 21 devices: smp_write_gpio --count=2 --data=92,49,24,92,24,92,49,24 -t 4 --index=1 /dev/bsg/sas_hostX Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'include/scsi')
-rw-r--r--include/scsi/libsas.h11
-rw-r--r--include/scsi/sas.h8
2 files changed, 19 insertions, 0 deletions
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 2517254..af0a1de 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -405,6 +405,13 @@ static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
phy->linkrate = SAS_LINK_RATE_UNKNOWN;
}
+static inline unsigned int to_sas_gpio_od(int device, int bit)
+{
+ return 3 * device + bit;
+}
+
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
+
/* ---------- Tasks ---------- */
/*
service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
@@ -592,6 +599,10 @@ struct sas_domain_function_template {
/* Phy management */
int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+
+ /* GPIO support */
+ int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
+ u8 reg_index, u8 reg_count, u8 *write_data);
};
extern int sas_register_ha(struct sas_ha_struct *);
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index e9fd022..a3001ad 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -195,6 +195,14 @@ enum sas_open_rej_reason {
SAS_OREJ_RSVD_RETRY = 18,
};
+enum sas_gpio_reg_type {
+ SAS_GPIO_REG_CFG = 0,
+ SAS_GPIO_REG_RX = 1,
+ SAS_GPIO_REG_RX_GP = 2,
+ SAS_GPIO_REG_TX = 3,
+ SAS_GPIO_REG_TX_GP = 4,
+};
+
struct dev_to_host_fis {
u8 fis_type; /* 0x34 */
u8 flags;
OpenPOWER on IntegriCloud