Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits)
  [SCSI] qla4xxx: export address/port of connection (fix udev disk names)
  [SCSI] ipr: Fix BUG on adapter dump timeout
  [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer
  [SCSI] hpsa: change confusing message to be more clear
  [SCSI] iscsi class: fix vlan configuration
  [SCSI] qla4xxx: fix data alignment and use nl helpers
  [SCSI] iscsi class: fix link local mispelling
  [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA
  [SCSI] aacraid: use lower snprintf() limit
  [SCSI] lpfc 8.3.27: Change driver version to 8.3.27
  [SCSI] lpfc 8.3.27: T10 additions for SLI4
  [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery
  [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name
  [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout
  [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes
  [SCSI] megaraid_sas: Changelog and version update
  [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic
  [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support
  [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers
  [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts
  ...

1 files changed, 22 insertions, 2 deletions

diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index e9fd022..3673d68 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -108,6 +108,7 @@ enum sas_protocol {
 	SAS_PROTOCOL_STP		= 0x04,
 	SAS_PROTOCOL_SSP		= 0x08,
 	SAS_PROTOCOL_ALL		= 0x0E,
+	SAS_PROTOCOL_STP_ALL		= SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
 };
 
 /* From the spec; local phys only */
@@ -121,6 +122,7 @@ enum phy_func {
 	PHY_FUNC_TX_SATA_PS_SIGNAL,
 	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
 	PHY_FUNC_SET_LINK_RATE,
+	PHY_FUNC_GET_EVENTS,
 };
 
 /* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
@@ -195,6 +197,14 @@ enum sas_open_rej_reason {
 	SAS_OREJ_RSVD_RETRY = 18,
 };
 
+enum sas_gpio_reg_type {
+	SAS_GPIO_REG_CFG   = 0,
+	SAS_GPIO_REG_RX    = 1,
+	SAS_GPIO_REG_RX_GP = 2,
+	SAS_GPIO_REG_TX    = 3,
+	SAS_GPIO_REG_TX_GP = 4,
+};
+
 struct  dev_to_host_fis {
 	u8     fis_type;	  /* 0x34 */
 	u8     flags;
@@ -341,7 +351,12 @@ struct report_general_resp {
 
 	u8      conf_route_table:1;
 	u8      configuring:1;
-	u8      _r_b:6;
+	u8	config_others:1;
+	u8	orej_retry_supp:1;
+	u8	stp_cont_awt:1;
+	u8	self_config:1;
+	u8	zone_config:1;
+	u8	t2t_supp:1;
 
 	u8      _r_c;
 
@@ -528,7 +543,12 @@ struct report_general_resp {
 	u8      _r_a;
 	u8      num_phys;
 
-	u8      _r_b:6;
+	u8	t2t_supp:1;
+	u8	zone_config:1;
+	u8	self_config:1;
+	u8	stp_cont_awt:1;
+	u8	orej_retry_supp:1;
+	u8	config_others:1;
 	u8      configuring:1;
 	u8      conf_route_table:1;