Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please accept this batch of updates intended for the 3.12 stream.

For the mac80211 bits, Johannes says this:

"This time I have various improvements all over the place: IBSS, mesh,
testmode, AP client powersave handling, one of the rare rfkill patches
and some code cleanup."

Also for mac80211:

"And I also have some more changes for -next, just a few small fixes and
improvements, nothing really stands out."

And for iwlwifi:

"This time I have some powersave work (notably uAPSD support), CQM
offloads, support for a new firmware API and various code cleanups."

Regarding the Bluetooth bits, Gustavo says:

"Patches to 3.12, here we have:

* implementation of a proper tty_port for RFCOMM devices, this fixes some
issues people were seeing lately in the kernel.
* Add voice_setting option for SCO, it is used for SCO Codec selection
* bugfixes, small improvements and clean ups"

For the NFC bits, Samuel says:

"With this one we have:

- A few pn533 improvements and minor fixes. Testing our pn533 driver
  against Google's NCI stack triggered a few issues that we fixed now.
  We also added Tx fragmentation support to this driver.

- More NFC secure element handling. We added a GET_SE netlink command
  for getting all the discovered secure elements, and we defined 2
  additional secure element netlink event (transaction and connectivity).
  We also fixed a couple of typos and copy-paste bugs from the secure
  element handling code.

- Firmware download support for the pn544 driver. This chipset can enter a
  special mode where it's waiting for firmware blobs to replace the
  already flashed one. We now support that mode."

With repect to the ath tree, Kalle says:

"New features in ath10k are rx/tx checsumming in hw and survey scan
implemented by Michal. Also he made fixes to different areas of the
driver, most notable being fixing the case when using two streams and
reducing the number of interface combinations to avoid firmware crashes.
Bartosz did a clean related to how we handle SoC power save in PCI
layer.

For ath6kl Mohammed and Vasanth sent each a patch to fix two infrequent
crashes."

I also pulled the wireless tree into wireless-next to support a
request from Johannes.  On top of all that, there are the usual
sort of driver updates.  The mwifiex, brcmfmac, brcmsmac, ath9k,
and rt2x00 drivers all get some attention, as does the bcma bus and
a few other random bits here and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 137 insertions, 10 deletions

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 10eb9b3..10d43d8 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -107,6 +107,14 @@ struct bt_power {
  */
 #define BT_CHANNEL_POLICY_AMP_PREFERRED		2
 
+#define BT_VOICE		11
+struct bt_voice {
+	__u16 setting;
+};
+
+#define BT_VOICE_TRANSPARENT			0x0003
+#define BT_VOICE_CVSD_16BIT			0x0060
+
 __printf(1, 2)
 int bt_info(const char *fmt, ...);
 __printf(1, 2)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 3c592cf..aaeaf09 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -238,6 +238,7 @@ enum {
 #define LMP_CVSD	0x01
 #define LMP_PSCHEME	0x02
 #define LMP_PCONTROL	0x04
+#define LMP_TRANSPARENT	0x08
 
 #define LMP_RSSI_INQ	0x40
 #define LMP_ESCO	0x80
@@ -296,6 +297,12 @@ enum {
 #define HCI_AT_GENERAL_BONDING		0x04
 #define HCI_AT_GENERAL_BONDING_MITM	0x05
 
+/* I/O capabilities */
+#define HCI_IO_DISPLAY_ONLY	0x00
+#define HCI_IO_DISPLAY_YESNO	0x01
+#define HCI_IO_KEYBOARD_ONLY	0x02
+#define HCI_IO_NO_INPUT_OUTPUT	0x03
+
 /* Link Key types */
 #define HCI_LK_COMBINATION		0x00
 #define HCI_LK_LOCAL_UNIT		0x01
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index f77885e..3ede820 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -320,6 +320,7 @@ struct hci_conn {
 	__u32		passkey_notify;
 	__u8		passkey_entered;
 	__u16		disc_timeout;
+	__u16		setting;
 	unsigned long	flags;
 
 	__u8		remote_cap;
@@ -569,7 +570,7 @@ static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev,
 }
 
 void hci_disconnect(struct hci_conn *conn, __u8 reason);
-void hci_setup_sync(struct hci_conn *conn, __u16 handle);
+bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 
 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
@@ -584,6 +585,8 @@ struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle);
 
 struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst,
 			     __u8 dst_type, __u8 sec_level, __u8 auth_type);
+struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
+				 __u16 setting);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type);
@@ -797,6 +800,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define lmp_lsto_capable(dev)      ((dev)->features[0][7] & LMP_LSTO)
 #define lmp_inq_tx_pwr_capable(dev) ((dev)->features[0][7] & LMP_INQ_TX_PWR)
 #define lmp_ext_feat_capable(dev)  ((dev)->features[0][7] & LMP_EXTFEATURES)
+#define lmp_transp_capable(dev)    ((dev)->features[0][2] & LMP_TRANSPARENT)
 
 /* ----- Extended LMP capabilities ----- */
 #define lmp_host_ssp_capable(dev)  ((dev)->features[1][0] & LMP_HOST_SSP)
@@ -1213,4 +1217,8 @@ void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __u8 rand[8],
 
 u8 bdaddr_to_le(u8 bdaddr_type);
 
+#define SCO_AIRMODE_MASK       0x0003
+#define SCO_AIRMODE_CVSD       0x0000
+#define SCO_AIRMODE_TRANSP     0x0003
+
 #endif /* __HCI_CORE_H */
diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
index 1e35c43..e252a31 100644
--- a/include/net/bluetooth/sco.h
+++ b/include/net/bluetooth/sco.h
@@ -73,6 +73,7 @@ struct sco_conn {
 struct sco_pinfo {
 	struct bt_sock	bt;
 	__u32		flags;
+	__u16		setting;
 	struct sco_conn	*conn;
 };
 
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 635e396..cb71091 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2081,7 +2081,7 @@ struct cfg80211_update_ft_ies_params {
  * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
  *	frame on another channel
  *
- * @testmode_cmd: run a test mode command
+ * @testmode_cmd: run a test mode command; @wdev may be %NULL
  * @testmode_dump: Implement a test mode dump. The cb->args[2] and up may be
  *	used by the function, but 0 and 1 must not be touched. Additionally,
  *	return error codes other than -ENOBUFS and -ENOENT will terminate the
@@ -2290,7 +2290,8 @@ struct cfg80211_ops {
 	void	(*rfkill_poll)(struct wiphy *wiphy);
 
 #ifdef CONFIG_NL80211_TESTMODE
-	int	(*testmode_cmd)(struct wiphy *wiphy, void *data, int len);
+	int	(*testmode_cmd)(struct wiphy *wiphy, struct wireless_dev *wdev,
+				void *data, int len);
 	int	(*testmode_dump)(struct wiphy *wiphy, struct sk_buff *skb,
 				 struct netlink_callback *cb,
 				 void *data, int len);
@@ -4055,6 +4056,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
  * @sig_dbm: signal strength in mBm, or 0 if unknown
  * @buf: Management frame (header + body)
  * @len: length of the frame data
+ * @flags: flags, as defined in enum nl80211_rxmgmt_flags
  * @gfp: context flags
  *
  * This function is called whenever an Action frame is received for a station
@@ -4066,7 +4068,7 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
  * driver is responsible for rejecting the frame.
  */
 bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
-		      const u8 *buf, size_t len, gfp_t gfp);
+		      const u8 *buf, size_t len, u32 flags, gfp_t gfp);
 
 /**
  * cfg80211_mgmt_tx_status - notification of TX status for management frame
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ab94dbc..cc6035f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -375,7 +375,7 @@ struct ieee80211_bss_conf {
 };
 
 /**
- * enum mac80211_tx_control_flags - flags to describe transmission information/status
+ * enum mac80211_tx_info_flags - flags to describe transmission information/status
  *
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
@@ -471,7 +471,7 @@ struct ieee80211_bss_conf {
  * Note: If you have to add new flags to the enumeration, then don't
  *	 forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
  */
-enum mac80211_tx_control_flags {
+enum mac80211_tx_info_flags {
 	IEEE80211_TX_CTL_REQ_TX_STATUS		= BIT(0),
 	IEEE80211_TX_CTL_ASSIGN_SEQ		= BIT(1),
 	IEEE80211_TX_CTL_NO_ACK			= BIT(2),
@@ -507,6 +507,18 @@ enum mac80211_tx_control_flags {
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
 
+/**
+ * enum mac80211_tx_control_flags - flags to describe transmit control
+ *
+ * @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control
+ *	protocol frame (e.g. EAP)
+ *
+ * These flags are used in tx_info->control.flags.
+ */
+enum mac80211_tx_control_flags {
+	IEEE80211_TX_CTRL_PORT_CTRL_PROTO	= BIT(0),
+};
+
 /*
  * This definition is used as a mask to clear all temporary flags, which are
  * set by the tx handlers for each transmission attempt by the mac80211 stack.
@@ -680,7 +692,8 @@ struct ieee80211_tx_info {
 			/* NB: vif can be NULL for injected frames */
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
-			/* 8 bytes free */
+			u32 flags;
+			/* 4 bytes free */
 		} control;
 		struct {
 			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
@@ -1508,6 +1521,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_RC_TABLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
+	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 };
 
 /**
@@ -2503,8 +2517,8 @@ enum ieee80211_roc_type {
  *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
  *	accordingly. This callback is not required and may sleep.
  *
- * @testmode_cmd: Implement a cfg80211 test mode command.
- *	The callback can sleep.
+ * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may
+ *	be %NULL. The callback can sleep.
  * @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
  *
  * @flush: Flush all pending frames from the hardware queue, making sure
@@ -2765,7 +2779,8 @@ struct ieee80211_ops {
 	void (*rfkill_poll)(struct ieee80211_hw *hw);
 	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
 #ifdef CONFIG_NL80211_TESTMODE
-	int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len);
+	int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    void *data, int len);
 	int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb,
 			     struct netlink_callback *cb,
 			     void *data, int len);
@@ -3674,6 +3689,89 @@ void ieee80211_get_key_rx_seq(struct ieee80211_key_conf *keyconf,
 			      int tid, struct ieee80211_key_seq *seq);
 
 /**
+ * ieee80211_set_key_tx_seq - set key TX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @seq: new sequence data
+ *
+ * This function allows a driver to set the current TX IV/PNs for the
+ * given key. This is useful when resuming from WoWLAN sleep and the
+ * device may have transmitted frames using the PTK, e.g. replies to
+ * ARP requests.
+ *
+ * Note that this function may only be called when no TX processing
+ * can be done concurrently.
+ */
+void ieee80211_set_key_tx_seq(struct ieee80211_key_conf *keyconf,
+			      struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_set_key_rx_seq - set key RX sequence counter
+ *
+ * @keyconf: the parameter passed with the set key
+ * @tid: The TID, or -1 for the management frame value (CCMP only);
+ *	the value on TID 0 is also used for non-QoS frames. For
+ *	CMAC, only TID 0 is valid.
+ * @seq: new sequence data
+ *
+ * This function allows a driver to set the current RX IV/PNs for the
+ * given key. This is useful when resuming from WoWLAN sleep and GTK
+ * rekey may have been done while suspended. It should not be called
+ * if IV checking is done by the device and not by mac80211.
+ *
+ * Note that this function may only be called when no RX processing
+ * can be done concurrently.
+ */
+void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf,
+			      int tid, struct ieee80211_key_seq *seq);
+
+/**
+ * ieee80211_remove_key - remove the given key
+ * @keyconf: the parameter passed with the set key
+ *
+ * Remove the given key. If the key was uploaded to the hardware at the
+ * time this function is called, it is not deleted in the hardware but
+ * instead assumed to have been removed already.
+ *
+ * Note that due to locking considerations this function can (currently)
+ * only be called during key iteration (ieee80211_iter_keys().)
+ */
+void ieee80211_remove_key(struct ieee80211_key_conf *keyconf);
+
+/**
+ * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN
+ * @vif: the virtual interface to add the key on
+ * @keyconf: new key data
+ *
+ * When GTK rekeying was done while the system was suspended, (a) new
+ * key(s) will be available. These will be needed by mac80211 for proper
+ * RX processing, so this function allows setting them.
+ *
+ * The function returns the newly allocated key structure, which will
+ * have similar contents to the passed key configuration but point to
+ * mac80211-owned memory. In case of errors, the function returns an
+ * ERR_PTR(), use IS_ERR() etc.
+ *
+ * Note that this function assumes the key isn't added to hardware
+ * acceleration, so no TX will be done with the key. Since it's a GTK
+ * on managed (station) networks, this is true anyway. If the driver
+ * calls this function from the resume callback and subsequently uses
+ * the return code 1 to reconfigure the device, this key will be part
+ * of the reconfiguration.
+ *
+ * Note that the driver should also call ieee80211_set_key_rx_seq()
+ * for the new key for each TID to set up sequence counters properly.
+ *
+ * IMPORTANT: If this replaces a key that is present in the hardware,
+ * then it will attempt to remove it during this call. In many cases
+ * this isn't what you want, so call ieee80211_remove_key() first for
+ * the key that's being replaced.
+ */
+struct ieee80211_key_conf *
+ieee80211_gtk_rekey_add(struct ieee80211_vif *vif,
+			struct ieee80211_key_conf *keyconf);
+
+/**
  * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying
  * @vif: virtual interface the rekeying was done on
  * @bssid: The BSSID of the AP, for checking association
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 5f286b7..f68ee68 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -224,6 +224,9 @@ int nfc_set_remote_general_bytes(struct nfc_dev *dev,
 				 u8 *gt, u8 gt_len);
 u8 *nfc_get_local_general_bytes(struct nfc_dev *dev, size_t *gb_len);
 
+int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name,
+			 u32 result);
+
 int nfc_targets_found(struct nfc_dev *dev,
 		      struct nfc_target *targets, int ntargets);
 int nfc_target_lost(struct nfc_dev *dev, u32 target_idx);