diff options
author | Johannes Berg <johannes@sipsolutions.net> | 2008-05-15 12:55:29 +0200 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-05-21 21:48:11 -0400 |
commit | e039fa4a4195ac4ee895e6f3d1334beed63256fe (patch) | |
tree | cfd0762d73df96b73052378be7b157c4ac6e7035 /include/net | |
parent | e24549485f859be6518929bb1c9c0257d79f033d (diff) | |
download | op-kernel-dev-e039fa4a4195ac4ee895e6f3d1334beed63256fe.zip op-kernel-dev-e039fa4a4195ac4ee895e6f3d1334beed63256fe.tar.gz |
mac80211: move TX info into skb->cb
This patch converts mac80211 and all drivers to have transmit
information and status in skb->cb rather than allocating extra
memory for it and copying all the data around. To make it fit,
a union is used where only data that is necessary for all steps
is kept outside of the union.
A number of fixes were done by Ivo, as well as the rt2x00 part
of this patch.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/net')
-rw-r--r-- | include/net/mac80211.h | 299 |
1 files changed, 133 insertions, 166 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0df91be..54960b8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -201,101 +201,127 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe Tx configuration for - * the Tx frame - * - * These flags are used with the @flags member of &ieee80211_tx_control - * - * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame - * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) - * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TXCTL_RATE_CTRL_PROBE - * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter - * for destination station - * @IEEE80211_TXCTL_REQUEUE: - * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long - * retry value - * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211 - * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon - * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted - * from antenna_sel_tx, so if 1 antenna is marked - * use SISO, 2 antennas marked use MIMO, n antennas - * marked use MIMO_n. - * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval + * enum mac80211_tx_flags - flags to transmission information/status + * + * These flags are used with the @flags member of &ieee80211_tx_info + * + * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; + * e.g., for EAPOL frame + * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame + * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., + * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE + * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination + * station + * @IEEE80211_TX_CTL_REQUEUE: + * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the + * through set_retry_limit configured long retry value + * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 + * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number + * of streams when this flag is on can be extracted from antenna_sel_tx, + * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n + * antennas marked use MIMO_n. + * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame + * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width + * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels + * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval + * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. + * @IEEE80211_TX_STAT_ACK: Frame was acknowledged + * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. */ enum mac80211_tx_control_flags { - IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0), - IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1), - IEEE80211_TXCTL_USE_RTS_CTS = (1<<2), - IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3), - IEEE80211_TXCTL_NO_ACK = (1<<4), - IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5), - IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6), - IEEE80211_TXCTL_REQUEUE = (1<<7), - IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8), - IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9), - IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10), - IEEE80211_TXCTL_EAPOL_FRAME = (1<<11), - IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12), - IEEE80211_TXCTL_AMPDU = (1<<13), - IEEE80211_TXCTL_OFDM_HT = (1<<14), - IEEE80211_TXCTL_GREEN_FIELD = (1<<15), - IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16), - IEEE80211_TXCTL_DUP_DATA = (1<<17), - IEEE80211_TXCTL_SHORT_GI = (1<<18), + IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), + IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), + IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), + IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), + IEEE80211_TX_CTL_NO_ACK = BIT(4), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), + IEEE80211_TX_CTL_REQUEUE = BIT(7), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), + IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), + IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), + IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), + IEEE80211_TX_CTL_AMPDU = BIT(13), + IEEE80211_TX_CTL_OFDM_HT = BIT(14), + IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), + IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), + IEEE80211_TX_CTL_DUP_DATA = BIT(17), + IEEE80211_TX_CTL_SHORT_GI = BIT(18), + IEEE80211_TX_CTL_INJECTED = BIT(19), + IEEE80211_TX_STAT_TX_FILTERED = BIT(20), + IEEE80211_TX_STAT_ACK = BIT(21), + IEEE80211_TX_STAT_AMPDU = BIT(22), }; -/* Transmit control fields. This data structure is passed to low-level driver - * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). - * - * NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() - * context (i.e. when defering the work to a workqueue). - * The vif pointer is valid until the it has been removed with the - * ieee80211_ops->remove_interface() callback funtion. - * The hw_key pointer is valid until it has been removed with the - * ieee80211_ops->set_key() callback function. - */ -struct ieee80211_tx_control { - u32 flags; /* tx control flags defined above */ - - s8 tx_rate_idx, /* Transmit rate (indexes registered rates) */ - rts_cts_rate_idx, /* Transmit rate for RTS/CTS frame */ - alt_retry_rate_idx; /* retry rate for the last retries */ - - s8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ - struct ieee80211_vif *vif; - - /* Key used for hardware encryption - * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ - struct ieee80211_key_conf *hw_key; +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ + (sizeof(((struct sk_buff *)0)->cb) - 8) +#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ + (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) - enum ieee80211_band band; +/** + * struct ieee80211_tx_info - skb transmit information + * + * This structure is placed in skb->cb for three uses: + * (1) mac80211 TX control - mac80211 tells the driver what to do + * (2) driver internal use (if applicable) + * (3) TX status information - driver tells mac80211 what happened + * + * @flags: transmit info flags, defined above + * @retry_count: number of retries + * @excessive_retries: set to 1 if the frame was retried many times + * but not acknowledged + * @ampdu_ack_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_ack_map: block ack bit map for the aggregation. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ack_signal: signal strength of the ACK frame + */ +struct ieee80211_tx_info { + /* common information */ + u32 flags; + u8 band; + s8 tx_rate_idx; + u8 antenna_sel_tx; - u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit - * position represents antenna number used */ - u8 icv_len; /* length of the ICV/MIC field in octets */ - u8 iv_len; /* length of the IV field in octets */ - u16 queue; /* hardware queue to use for this frame; - * 0 = highest, hw->queues-1 = lowest */ - u16 aid; /* Station AID */ - int type; /* internal */ + u8 queue; /* use skb_queue_mapping soon */ + + union { + struct { + struct ieee80211_vif *vif; + struct ieee80211_key_conf *hw_key; + unsigned long jiffies; + int ifindex; + u16 aid; + s8 rts_cts_rate_idx, alt_retry_rate_idx; + u8 retry_limit; + u8 icv_len; + u8 iv_len; + } control; + struct { + u64 ampdu_ack_map; + int ack_signal; + u8 retry_count; + bool excessive_retries; + u8 ampdu_ack_len; + } status; + void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + }; }; +static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) +{ + return (struct ieee80211_tx_info *)skb->cb; +} /** @@ -363,52 +389,6 @@ struct ieee80211_rx_status { }; /** - * enum ieee80211_tx_status_flags - transmit status flags - * - * Status flags to indicate various transmit conditions. - * - * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted - * because the destination STA was in powersave mode. - * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged - * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status - * is for the whole aggregation. - */ -enum ieee80211_tx_status_flags { - IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, - IEEE80211_TX_STATUS_ACK = 1<<1, - IEEE80211_TX_STATUS_AMPDU = 1<<2, -}; - -/** - * struct ieee80211_tx_status - transmit status - * - * As much information as possible should be provided for each transmitted - * frame with ieee80211_tx_status(). - * - * @control: a copy of the &struct ieee80211_tx_control passed to the driver - * in the tx() callback. - * @flags: transmit status flags, defined above - * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged - * @ampdu_ack_len: number of aggregated frames. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ampdu_ack_map: block ack bit map for the aggregation. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ack_signal: signal strength of the ACK frame either in dBm, dB or unspec - * depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_* - */ -struct ieee80211_tx_status { - struct ieee80211_tx_control control; - u8 flags; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; - u64 ampdu_ack_map; - int ack_signal; -}; - -/** * enum ieee80211_conf_flags - configuration flags * * Flags to define PHY configuration options @@ -563,7 +543,6 @@ struct ieee80211_if_conf { u8 *ssid; size_t ssid_len; struct sk_buff *beacon; - struct ieee80211_tx_control *beacon_control; }; /** @@ -825,7 +804,7 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { if (WARN_ON(c->tx_rate_idx < 0)) return NULL; @@ -834,20 +813,20 @@ ieee80211_get_tx_rate(const struct ieee80211_hw *hw, static inline struct ieee80211_rate * ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->rts_cts_rate_idx < 0) + if (c->control.rts_cts_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->rts_cts_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx]; } static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->alt_retry_rate_idx < 0) + if (c->control.alt_retry_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->alt_retry_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx]; } /** @@ -1142,8 +1121,7 @@ enum ieee80211_ampdu_mlme_action { * that TX/RX_STOP can pass NULL for this parameter. */ struct ieee80211_ops { - int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); int (*add_interface)(struct ieee80211_hw *hw, @@ -1187,8 +1165,7 @@ struct ieee80211_ops { u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control); + struct sk_buff *skb); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, @@ -1384,13 +1361,9 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_tx_status_irqsafe - irq-safe transmit status callback @@ -1403,13 +1376,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_beacon_get - beacon generation function @@ -1425,8 +1394,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * is responsible of freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); + struct ieee80211_vif *vif); /** * ieee80211_rts_get - RTS frame generation function @@ -1434,7 +1402,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @rts: The buffer where to store the RTS frame. * * If the RTS frames are generated by the host system (i.e., not in @@ -1444,7 +1412,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, */ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_rts *rts); /** @@ -1452,7 +1420,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the RTS. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1460,7 +1428,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_ctstoself_get - CTS-to-self frame generation function @@ -1468,7 +1436,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @cts: The buffer where to store the CTS-to-self frame. * * If the CTS-to-self frames are generated by the host system (i.e., not in @@ -1479,7 +1447,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_cts *cts); /** @@ -1487,7 +1455,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1496,7 +1464,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame @@ -1535,8 +1503,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * use common code for all beacons. */ struct sk_buff * -ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** * ieee80211_get_hdrlen_from_skb - get header length from data |