mac80211: clean up rate encoding bits in RX status

In preparation for adding support for HE rates, clean up
the driver report encoding for rate/bandwidth reporting
on RX frames.

Much of this patch was done with the following spatch:

@@
expression status;
@@
-status->flag & (RX_FLAG_HT | RX_FLAG_VHT)
+status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT)

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_SHORTPRE
+status->enc_flags op RX_ENC_FLAG_SHORTPRE
@@
expression status;
@@
-status->flag & RX_FLAG_SHORTPRE
+status->enc_flags & RX_ENC_FLAG_SHORTPRE

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_HT
+status->enc_flags op RX_ENC_FLAG_HT
@@
expression status;
@@
-status->flag & RX_FLAG_HT
+status->enc_flags & RX_ENC_FLAG_HT

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_40MHZ
+status->enc_flags op RX_ENC_FLAG_40MHZ
@@
expression status;
@@
-status->flag & RX_FLAG_40MHZ
+status->enc_flags & RX_ENC_FLAG_40MHZ

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_SHORT_GI
+status->enc_flags op RX_ENC_FLAG_SHORT_GI
@@
expression status;
@@
-status->flag & RX_FLAG_SHORT_GI
+status->enc_flags & RX_ENC_FLAG_SHORT_GI

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_HT_GF
+status->enc_flags op RX_ENC_FLAG_HT_GF
@@
expression status;
@@
-status->flag & RX_FLAG_HT_GF
+status->enc_flags & RX_ENC_FLAG_HT_GF

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_VHT
+status->enc_flags op RX_ENC_FLAG_VHT
@@
expression status;
@@
-status->flag & RX_FLAG_VHT
+status->enc_flags & RX_ENC_FLAG_VHT

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_STBC_MASK
+status->enc_flags op RX_ENC_FLAG_STBC_MASK
@@
expression status;
@@
-status->flag & RX_FLAG_STBC_MASK
+status->enc_flags & RX_ENC_FLAG_STBC_MASK

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_LDPC
+status->enc_flags op RX_ENC_FLAG_LDPC
@@
expression status;
@@
-status->flag & RX_FLAG_LDPC
+status->enc_flags & RX_ENC_FLAG_LDPC

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_10MHZ
+status->enc_flags op RX_ENC_FLAG_10MHZ
@@
expression status;
@@
-status->flag & RX_FLAG_10MHZ
+status->enc_flags & RX_ENC_FLAG_10MHZ

@@
assignment operator op;
expression status;
@@
-status->flag op RX_FLAG_5MHZ
+status->enc_flags op RX_ENC_FLAG_5MHZ
@@
expression status;
@@
-status->flag & RX_FLAG_5MHZ
+status->enc_flags & RX_ENC_FLAG_5MHZ

@@
assignment operator op;
expression status;
@@
-status->vht_flag op RX_VHT_FLAG_80MHZ
+status->enc_flags op RX_ENC_FLAG_80MHZ
@@
expression status;
@@
-status->vht_flag & RX_VHT_FLAG_80MHZ
+status->enc_flags & RX_ENC_FLAG_80MHZ

@@
assignment operator op;
expression status;
@@
-status->vht_flag op RX_VHT_FLAG_160MHZ
+status->enc_flags op RX_ENC_FLAG_160MHZ
@@
expression status;
@@
-status->vht_flag & RX_VHT_FLAG_160MHZ
+status->enc_flags & RX_ENC_FLAG_160MHZ

@@
assignment operator op;
expression status;
@@
-status->vht_flag op RX_VHT_FLAG_BF
+status->enc_flags op RX_ENC_FLAG_BF
@@
expression status;
@@
-status->vht_flag & RX_VHT_FLAG_BF
+status->enc_flags & RX_ENC_FLAG_BF

@@
assignment operator op;
expression status, STBC;
@@
-status->flag op STBC << RX_FLAG_STBC_SHIFT
+status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_SHORTPRE
+status.enc_flags op RX_ENC_FLAG_SHORTPRE
@@
expression status;
@@
-status.flag & RX_FLAG_SHORTPRE
+status.enc_flags & RX_ENC_FLAG_SHORTPRE

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_HT
+status.enc_flags op RX_ENC_FLAG_HT
@@
expression status;
@@
-status.flag & RX_FLAG_HT
+status.enc_flags & RX_ENC_FLAG_HT

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_40MHZ
+status.enc_flags op RX_ENC_FLAG_40MHZ
@@
expression status;
@@
-status.flag & RX_FLAG_40MHZ
+status.enc_flags & RX_ENC_FLAG_40MHZ

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_SHORT_GI
+status.enc_flags op RX_ENC_FLAG_SHORT_GI
@@
expression status;
@@
-status.flag & RX_FLAG_SHORT_GI
+status.enc_flags & RX_ENC_FLAG_SHORT_GI

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_HT_GF
+status.enc_flags op RX_ENC_FLAG_HT_GF
@@
expression status;
@@
-status.flag & RX_FLAG_HT_GF
+status.enc_flags & RX_ENC_FLAG_HT_GF

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_VHT
+status.enc_flags op RX_ENC_FLAG_VHT
@@
expression status;
@@
-status.flag & RX_FLAG_VHT
+status.enc_flags & RX_ENC_FLAG_VHT

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_STBC_MASK
+status.enc_flags op RX_ENC_FLAG_STBC_MASK
@@
expression status;
@@
-status.flag & RX_FLAG_STBC_MASK
+status.enc_flags & RX_ENC_FLAG_STBC_MASK

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_LDPC
+status.enc_flags op RX_ENC_FLAG_LDPC
@@
expression status;
@@
-status.flag & RX_FLAG_LDPC
+status.enc_flags & RX_ENC_FLAG_LDPC

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_10MHZ
+status.enc_flags op RX_ENC_FLAG_10MHZ
@@
expression status;
@@
-status.flag & RX_FLAG_10MHZ
+status.enc_flags & RX_ENC_FLAG_10MHZ

@@
assignment operator op;
expression status;
@@
-status.flag op RX_FLAG_5MHZ
+status.enc_flags op RX_ENC_FLAG_5MHZ
@@
expression status;
@@
-status.flag & RX_FLAG_5MHZ
+status.enc_flags & RX_ENC_FLAG_5MHZ

@@
assignment operator op;
expression status;
@@
-status.vht_flag op RX_VHT_FLAG_80MHZ
+status.enc_flags op RX_ENC_FLAG_80MHZ
@@
expression status;
@@
-status.vht_flag & RX_VHT_FLAG_80MHZ
+status.enc_flags & RX_ENC_FLAG_80MHZ

@@
assignment operator op;
expression status;
@@
-status.vht_flag op RX_VHT_FLAG_160MHZ
+status.enc_flags op RX_ENC_FLAG_160MHZ
@@
expression status;
@@
-status.vht_flag & RX_VHT_FLAG_160MHZ
+status.enc_flags & RX_ENC_FLAG_160MHZ

@@
assignment operator op;
expression status;
@@
-status.vht_flag op RX_VHT_FLAG_BF
+status.enc_flags op RX_ENC_FLAG_BF
@@
expression status;
@@
-status.vht_flag & RX_VHT_FLAG_BF
+status.enc_flags & RX_ENC_FLAG_BF

@@
assignment operator op;
expression status, STBC;
@@
-status.flag op STBC << RX_FLAG_STBC_SHIFT
+status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT

@@
@@
-RX_FLAG_STBC_SHIFT
+RX_ENC_FLAG_STBC_SHIFT

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 53 insertions, 55 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b1ac872..53b3853 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1045,16 +1045,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	(including FCS) was received.
  * @RX_FLAG_MACTIME_PLCP_START: The timestamp passed in the RX status (@mactime
  *	field) is valid and contains the time the SYNC preamble was received.
- * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
- * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
- * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
- * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
- * @RX_FLAG_SHORT_GI: Short guard interval was used
  * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
  *	Valid only for data frames (mainly A-MPDU)
- * @RX_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, if
- *	the driver fills this value it should add %IEEE80211_RADIOTAP_MCS_HAVE_FMT
- *	to hw.radiotap_mcs_details to advertise that fact
  * @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference
  *	number (@ampdu_reference) must be populated and be a distinct number for
  *	each A-MPDU
@@ -1067,7 +1059,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	is stored in the @ampdu_delimiter_crc field)
  * @RX_FLAG_MIC_STRIPPED: The mic was stripped of this packet. Decryption was
  *	done by the hardware
- * @RX_FLAG_LDPC: LDPC was used
  * @RX_FLAG_ONLY_MONITOR: Report frame only to monitor interfaces without
  *	processing it in any regular way.
  *	This is useful if drivers offload some frames but still want to report
@@ -1076,9 +1067,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	monitor interfaces.
  *	This is useful if drivers offload some frames but still want to report
  *	them for sniffing purposes.
- * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
- * @RX_FLAG_10MHZ: 10 MHz (half channel) was used
- * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
  * @RX_FLAG_AMSDU_MORE: Some drivers may prefer to report separate A-MSDU
  *	subframes instead of a one huge frame for performance reasons.
  *	All, but the last MSDU from an A-MSDU should have this flag set. E.g.
@@ -1106,52 +1094,62 @@ enum mac80211_rx_flags {
 	RX_FLAG_FAILED_FCS_CRC		= BIT(5),
 	RX_FLAG_FAILED_PLCP_CRC 	= BIT(6),
 	RX_FLAG_MACTIME_START		= BIT(7),
-	RX_FLAG_SHORTPRE		= BIT(8),
-	RX_FLAG_HT			= BIT(9),
-	RX_FLAG_40MHZ			= BIT(10),
-	RX_FLAG_SHORT_GI		= BIT(11),
-	RX_FLAG_NO_SIGNAL_VAL		= BIT(12),
-	RX_FLAG_HT_GF			= BIT(13),
-	RX_FLAG_AMPDU_DETAILS		= BIT(14),
-	RX_FLAG_PN_VALIDATED		= BIT(15),
-	RX_FLAG_DUP_VALIDATED		= BIT(16),
-	RX_FLAG_AMPDU_LAST_KNOWN	= BIT(17),
-	RX_FLAG_AMPDU_IS_LAST		= BIT(18),
-	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(19),
-	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(20),
-	RX_FLAG_MACTIME_END		= BIT(21),
-	RX_FLAG_VHT			= BIT(22),
-	RX_FLAG_LDPC			= BIT(23),
-	RX_FLAG_ONLY_MONITOR		= BIT(24),
-	RX_FLAG_SKIP_MONITOR		= BIT(25),
-	RX_FLAG_STBC_MASK		= BIT(26) | BIT(27),
-	RX_FLAG_10MHZ			= BIT(28),
-	RX_FLAG_5MHZ			= BIT(29),
-	RX_FLAG_AMSDU_MORE		= BIT(30),
-	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
-	RX_FLAG_MIC_STRIPPED		= BIT_ULL(32),
-	RX_FLAG_ALLOW_SAME_PN		= BIT_ULL(33),
-	RX_FLAG_ICV_STRIPPED		= BIT_ULL(34),
+	RX_FLAG_NO_SIGNAL_VAL		= BIT(8),
+	RX_FLAG_AMPDU_DETAILS		= BIT(9),
+	RX_FLAG_PN_VALIDATED		= BIT(10),
+	RX_FLAG_DUP_VALIDATED		= BIT(11),
+	RX_FLAG_AMPDU_LAST_KNOWN	= BIT(12),
+	RX_FLAG_AMPDU_IS_LAST		= BIT(13),
+	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(14),
+	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(15),
+	RX_FLAG_MACTIME_END		= BIT(16),
+	RX_FLAG_ONLY_MONITOR		= BIT(17),
+	RX_FLAG_SKIP_MONITOR		= BIT(18),
+	RX_FLAG_AMSDU_MORE		= BIT(19),
+	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(20),
+	RX_FLAG_MIC_STRIPPED		= BIT(21),
+	RX_FLAG_ALLOW_SAME_PN		= BIT(22),
+	RX_FLAG_ICV_STRIPPED		= BIT(23),
 };
 
-#define RX_FLAG_STBC_SHIFT		26
-
 /**
- * enum mac80211_rx_vht_flags - receive VHT flags
+ * enum mac80211_rx_encoding_flags - MCS & bandwidth flags
  *
- * These flags are used with the @vht_flag member of
- *	&struct ieee80211_rx_status.
- * @RX_VHT_FLAG_80MHZ: 80 MHz was used
- * @RX_VHT_FLAG_160MHZ: 160 MHz was used
- * @RX_VHT_FLAG_BF: packet was beamformed
- */
-
-enum mac80211_rx_vht_flags {
-	RX_VHT_FLAG_80MHZ		= BIT(0),
-	RX_VHT_FLAG_160MHZ		= BIT(1),
-	RX_VHT_FLAG_BF			= BIT(2),
+ * @RX_ENC_FLAG_SHORTPRE: Short preamble was used for this frame
+ * @RX_ENC_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_ENC_FLAG_VHT: VHT MCS was used and rate_index is MCS index
+ * @RX_ENC_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_ENC_FLAG_SHORT_GI: Short guard interval was used
+ * @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission,
+ *	if the driver fills this value it should add
+ *	%IEEE80211_RADIOTAP_MCS_HAVE_FMT
+ *	to hw.radiotap_mcs_details to advertise that fact
+ * @RX_ENC_FLAG_LDPC: LDPC was used
+ * @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
+ * @RX_ENC_FLAG_10MHZ: 10 MHz (half channel) was used
+ * @RX_ENC_FLAG_5MHZ: 5 MHz (quarter channel) was used
+ * @RX_ENC_FLAG_80MHZ: 80 MHz was used
+ * @RX_ENC_FLAG_160MHZ: 160 MHz was used
+ * @RX_ENC_FLAG_BF: packet was beamformed
+ */
+enum mac80211_rx_encoding_flags {
+	RX_ENC_FLAG_SHORTPRE		= BIT(0),
+	RX_ENC_FLAG_HT			= BIT(1),
+	RX_ENC_FLAG_40MHZ		= BIT(2),
+	RX_ENC_FLAG_SHORT_GI		= BIT(3),
+	RX_ENC_FLAG_HT_GF		= BIT(4),
+	RX_ENC_FLAG_VHT			= BIT(5),
+	RX_ENC_FLAG_STBC_MASK		= BIT(6) | BIT(7),
+	RX_ENC_FLAG_LDPC		= BIT(8),
+	RX_ENC_FLAG_10MHZ		= BIT(9),
+	RX_ENC_FLAG_5MHZ		= BIT(10),
+	RX_ENC_FLAG_80MHZ		= BIT(11),
+	RX_ENC_FLAG_160MHZ		= BIT(12),
+	RX_ENC_FLAG_BF			= BIT(13),
 };
 
+#define RX_ENC_FLAG_STBC_SHIFT		6
+
 /**
  * struct ieee80211_rx_status - receive status
  *
@@ -1181,7 +1179,7 @@ enum mac80211_rx_vht_flags {
  *	HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
  * @vht_nss: number of streams (VHT only)
  * @flag: %RX_FLAG_\*
- * @vht_flag: %RX_VHT_FLAG_\*
+ * @enc_flags: uses bits from &enum mac80211_rx_encoding_flags
  * @rx_flags: internal RX flags for mac80211
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
@@ -1192,9 +1190,9 @@ struct ieee80211_rx_status {
 	u64 boottime_ns;
 	u32 device_timestamp;
 	u32 ampdu_reference;
-	u64 flag;
+	u32 flag;
+	u16 enc_flags;
 	u16 freq;
-	u8 vht_flag;
 	u8 rate_idx;
 	u8 vht_nss;
 	u8 rx_flags;