Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.

 2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.

 3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
    can get rid of the {g,s}et_settings ethtool callbacks, from Michal
    Kubecek.

 4) Add software timestamping to veth driver, from Michael Walle.

 5) More work to make packet classifiers and actions lockless, from Vlad
    Buslov.

 6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.

 7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.

 8) Support batching of XDP buffers in vhost_net, from Jason Wang.

 9) Add flow dissector BPF hook, from Petar Penkov.

10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.

11) Add NLA_REJECT netlink attribute policy type, to signal when users
    provide attributes in situations which don't make sense. From
    Johannes Berg.

12) Switch TCP and fair-queue scheduler over to earliest departure time
    model. From Eric Dumazet.

13) Improve guest receive performance by doing rx busy polling in tx
    path of vhost networking driver, from Tonghao Zhang.

14) Add per-cgroup local storage to bpf

15) Add reference tracking to BPF, from Joe Stringer. The verifier can
    now make sure that references taken to objects are properly released
    by the program.

16) Support in-place encryption in TLS, from Vakul Garg.

17) Add new taprio packet scheduler, from Vinicius Costa Gomes.

18) Lots of selftests additions, too numerous to mention one by one here
    but all of which are very much appreciated.

19) Support offloading of eBPF programs containing BPF to BPF calls in
    nfp driver, frm Quentin Monnet.

20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.

21) Lots of u32 classifier cleanups and simplifications, from Al Viro.

22) Add new strict versions of netlink message parsers, and enable them
    for some situations. From David Ahern.

23) Evict neighbour entries on carrier down, also from David Ahern.

24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
    and John Fastabend.

25) Add support for filtering route dumps, from David Ahern.

26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.

27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
    Schimmel.

28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.

29) Add back byte-queue-limit support to r8169, with all the bug fixes
    in other areas of the driver it works now! From Florian Westphal and
    Heiner Kallweit.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
  tcp: add tcp_reset_xmit_timer() helper
  qed: Fix static checker warning
  Revert "be2net: remove desc field from be_eq_obj"
  Revert "net: simplify sock_poll_wait"
  net: socionext: Reset tx queue in ndo_stop
  net: socionext: Add dummy PHY register read in phy_write()
  net: socionext: Stop PHY before resetting netsec
  net: stmmac: Set OWN bit for jumbo frames
  arm64: dts: stratix10: Support Ethernet Jumbo frame
  tls: Add maintainers
  net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
  octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
  octeontx2-af: Support for setting MAC address
  octeontx2-af: Support for changing RSS algorithm
  octeontx2-af: NIX Rx flowkey configuration for RSS
  octeontx2-af: Install ucast and bcast pkt forwarding rules
  octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
  octeontx2-af: NPC MCAM and LDATA extract minimal configuration
  octeontx2-af: Enable packet length and csum validation
  octeontx2-af: Support for VTAG strip and capture
  ...

1 files changed, 122 insertions, 5 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5790f55..71985e9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -101,8 +101,9 @@
  * Drivers indicate that they use this model by implementing the .wake_tx_queue
  * driver operation.
  *
- * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
- * single per-vif queue for multicast data frames.
+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with
+ * another per-sta for non-data/non-mgmt and bufferable management frames, and
+ * a single per-vif queue for multicast data frames.
  *
  * The driver is expected to initialize its private per-queue data for stations
  * and interfaces in the .add_interface and .sta_add ops.
@@ -308,6 +309,8 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
  * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
+ * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ *	functionality changed for this BSS (AP mode).
  *
  */
 enum ieee80211_bss_change {
@@ -337,6 +340,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_MU_GROUPS		= 1<<23,
 	BSS_CHANGED_KEEP_ALIVE		= 1<<24,
 	BSS_CHANGED_MCAST_RATE		= 1<<25,
+	BSS_CHANGED_FTM_RESPONDER	= 1<<26,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -463,6 +467,21 @@ struct ieee80211_mu_group_data {
 };
 
 /**
+ * ieee80211_ftm_responder_params - FTM responder parameters
+ *
+ * @lci: LCI subelement content
+ * @civicloc: CIVIC location subelement content
+ * @lci_len: LCI data length
+ * @civicloc_len: Civic data length
+ */
+struct ieee80211_ftm_responder_params {
+	const u8 *lci;
+	const u8 *civicloc;
+	size_t lci_len;
+	size_t civicloc_len;
+};
+
+/**
  * struct ieee80211_bss_conf - holds the BSS's changing parameters
  *
  * This structure keeps information about a BSS (and an association
@@ -561,6 +580,9 @@ struct ieee80211_mu_group_data {
  * @protected_keep_alive: if set, indicates that the station should send an RSN
  *	protected frame to the AP to reset the idle timer at the AP for the
  *	station.
+ * @ftm_responder: whether to enable or disable fine timing measurement FTM
+ *	responder functionality.
+ * @ftmr_params: configurable lci/civic parameter when enabling FTM responder.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -611,6 +633,8 @@ struct ieee80211_bss_conf {
 	bool allow_p2p_go_ps;
 	u16 max_idle_period;
 	bool protected_keep_alive;
+	bool ftm_responder;
+	struct ieee80211_ftm_responder_params *ftmr_params;
 };
 
 /**
@@ -1140,6 +1164,11 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	from the RX info data, so leave those zeroed when building this data)
  * @RX_FLAG_RADIOTAP_HE_MU: HE MU radiotap data is present
  *	(&struct ieee80211_radiotap_he_mu)
+ * @RX_FLAG_RADIOTAP_LSIG: L-SIG radiotap data is present
+ * @RX_FLAG_NO_PSDU: use the frame only for radiotap reporting, with
+ *	the "0-length PSDU" field included there.  The value for it is
+ *	in &struct ieee80211_rx_status.  Note that if this value isn't
+ *	known the frame shouldn't be reported.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1170,6 +1199,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_AMPDU_EOF_BIT_KNOWN	= BIT(25),
 	RX_FLAG_RADIOTAP_HE		= BIT(26),
 	RX_FLAG_RADIOTAP_HE_MU		= BIT(27),
+	RX_FLAG_RADIOTAP_LSIG		= BIT(28),
+	RX_FLAG_NO_PSDU			= BIT(29),
 };
 
 /**
@@ -1242,6 +1273,7 @@ enum mac80211_rx_encoding {
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
  * @ampdu_delimiter_crc: A-MPDU delimiter CRC
+ * @zero_length_psdu_type: radiotap type of the 0-length PSDU
  */
 struct ieee80211_rx_status {
 	u64 mactime;
@@ -1262,6 +1294,7 @@ struct ieee80211_rx_status {
 	u8 chains;
 	s8 chain_signal[IEEE80211_MAX_CHAINS];
 	u8 ampdu_delimiter_crc;
+	u8 zero_length_psdu_type;
 };
 
 /**
@@ -1504,6 +1537,8 @@ enum ieee80211_vif_flags {
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void \*).
  * @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
+ * @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
+ *	protected by fq->lock.
  */
 struct ieee80211_vif {
 	enum nl80211_iftype type;
@@ -1528,6 +1563,8 @@ struct ieee80211_vif {
 
 	unsigned int probe_req_reg;
 
+	bool txqs_stopped[IEEE80211_NUM_ACS];
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
@@ -1839,7 +1876,9 @@ struct ieee80211_sta_rates {
  *	unlimited.
  * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
  * @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
- * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
+ * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
+ *	the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
  */
 struct ieee80211_sta {
 	u32 supp_rates[NUM_NL80211_BANDS];
@@ -1879,8 +1918,9 @@ struct ieee80211_sta {
 	u16 max_amsdu_len;
 	bool support_p2p_ps;
 	u16 max_rc_amsdu_len;
+	u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS];
 
-	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
+	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1914,7 +1954,8 @@ struct ieee80211_tx_control {
  *
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @sta: station table entry, %NULL for per-vif queue
- * @tid: the TID for this queue (unused for per-vif queue)
+ * @tid: the TID for this queue (unused for per-vif queue),
+ *	%IEEE80211_NUM_TIDS for non-data (if enabled)
  * @ac: the AC for this queue
  * @drv_priv: driver private area, sized by hw->txq_data_size
  *
@@ -2127,6 +2168,19 @@ struct ieee80211_txq {
  * @IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP: The driver (or firmware) doesn't
  *	support QoS NDP for AP probing - that's most likely a driver bug.
  *
+ * @IEEE80211_HW_BUFF_MMPDU_TXQ: use the TXQ for bufferable MMPDUs, this of
+ *	course requires the driver to use TXQs to start with.
+ *
+ * @IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW: (Hardware) rate control supports VHT
+ *	extended NSS BW (dot11VHTExtendedNSSBWCapable). This flag will be set if
+ *	the selected rate control algorithm sets %RATE_CTRL_CAPA_VHT_EXT_NSS_BW
+ *	but if the rate control is built-in then it must be set by the driver.
+ *	See also the documentation for that flag.
+ *
+ * @IEEE80211_HW_STA_MMPDU_TXQ: use the extra non-TID per-station TXQ for all
+ *	MMPDUs on station interfaces. This of course requires the driver to use
+ *	TXQs to start with.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2172,6 +2226,9 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
 	IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
 	IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
+	IEEE80211_HW_BUFF_MMPDU_TXQ,
+	IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW,
+	IEEE80211_HW_STA_MMPDU_TXQ,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -2290,6 +2347,10 @@ enum ieee80211_hw_flags {
  *	supported by HW.
  * @max_nan_de_entries: maximum number of NAN DE functions supported by the
  *	device.
+ *
+ * @tx_sk_pacing_shift: Pacing shift to set on TCP sockets when frames from
+ *	them are encountered. The default should typically not be changed,
+ *	unless the driver has good reasons for needing more buffers.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -2325,6 +2386,7 @@ struct ieee80211_hw {
 	u8 n_cipher_schemes;
 	const struct ieee80211_cipher_scheme *cipher_schemes;
 	u8 max_nan_de_entries;
+	u8 tx_sk_pacing_shift;
 };
 
 static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
@@ -2506,6 +2568,19 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * The set_default_unicast_key() call updates the default WEP key index
  * configured to the hardware for WEP encryption type. This is required
  * for devices that support offload of data packets (e.g. ARP responses).
+ *
+ * Mac80211 drivers should set the @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 flag
+ * when they are able to replace in-use PTK keys according to to following
+ * requirements:
+ * 1) They do not hand over frames decrypted with the old key to
+      mac80211 once the call to set_key() with command %DISABLE_KEY has been
+      completed when also setting @IEEE80211_KEY_FLAG_GENERATE_IV for any key,
+   2) either drop or continue to use the old key for any outgoing frames queued
+      at the time of the key deletion (including re-transmits),
+   3) never send out a frame queued prior to the set_key() %SET_KEY command
+      encrypted with the new key and
+   4) never send out a frame unencrypted when it should be encrypted.
+   Mac80211 will not queue any new frames for a deleted key to the driver.
  */
 
 /**
@@ -3542,6 +3617,12 @@ enum ieee80211_reconfig_type {
  * @del_nan_func: Remove a NAN function. The driver must call
  *	ieee80211_nan_func_terminated() with
  *	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST reason code upon removal.
+ * @can_aggregate_in_amsdu: Called in order to determine if HW supports
+ *	aggregating two specific frames in the same A-MSDU. The relation
+ *	between the skbs should be symmetric and transitive. Note that while
+ *	skb is always a real frame, head may or may not be an A-MSDU.
+ * @get_ftm_responder_stats: Retrieve FTM responder statistics, if available.
+ *	Statistics should be cumulative, currently no way to reset is provided.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -3824,6 +3905,12 @@ struct ieee80211_ops {
 	void (*del_nan_func)(struct ieee80211_hw *hw,
 			    struct ieee80211_vif *vif,
 			    u8 instance_id);
+	bool (*can_aggregate_in_amsdu)(struct ieee80211_hw *hw,
+				       struct sk_buff *head,
+				       struct sk_buff *skb);
+	int (*get_ftm_responder_stats)(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct cfg80211_ftm_responder_stats *ftm_stats);
 };
 
 /**
@@ -4293,6 +4380,21 @@ void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta,
 					   u32 thr);
 
 /**
+ * ieee80211_tx_rate_update - transmit rate update callback
+ *
+ * Drivers should call this functions with a non-NULL pub sta
+ * This function can be used in drivers that does not have provision
+ * in updating the tx rate in data path.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @pubsta: the station to update the tx rate for.
+ * @info: tx status information
+ */
+void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
+			      struct ieee80211_sta *pubsta,
+			      struct ieee80211_tx_info *info);
+
+/**
  * ieee80211_tx_status - transmit status callback
  *
  * Call this function for all transmitted frames after they have been
@@ -5644,7 +5746,22 @@ struct ieee80211_tx_rate_control {
 	bool bss;
 };
 
+/**
+ * enum rate_control_capabilities - rate control capabilities
+ */
+enum rate_control_capabilities {
+	/**
+	 * @RATE_CTRL_CAPA_VHT_EXT_NSS_BW:
+	 * Support for extended NSS BW support (dot11VHTExtendedNSSCapable)
+	 * Note that this is only looked at if the minimum number of chains
+	 * that the AP uses is < the number of TX chains the hardware has,
+	 * otherwise the NSS difference doesn't bother us.
+	 */
+	RATE_CTRL_CAPA_VHT_EXT_NSS_BW = BIT(0),
+};
+
 struct rate_control_ops {
+	unsigned long capa;
 	const char *name;
 	void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
 	void (*free)(void *priv);