Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) The addition of nftables.  No longer will we need protocol aware
    firewall filtering modules, it can all live in userspace.

    At the core of nftables is a, for lack of a better term, virtual
    machine that executes byte codes to inspect packet or metadata
    (arriving interface index, etc.) and make verdict decisions.

    Besides support for loading packet contents and comparing them, the
    interpreter supports lookups in various datastructures as
    fundamental operations.  For example sets are supports, and
    therefore one could create a set of whitelist IP address entries
    which have ACCEPT verdicts attached to them, and use the appropriate
    byte codes to do such lookups.

    Since the interpreted code is composed in userspace, userspace can
    do things like optimize things before giving it to the kernel.

    Another major improvement is the capability of atomically updating
    portions of the ruleset.  In the existing netfilter implementation,
    one has to update the entire rule set in order to make a change and
    this is very expensive.

    Userspace tools exist to create nftables rules using existing
    netfilter rule sets, but both kernel implementations will need to
    co-exist for quite some time as we transition from the old to the
    new stuff.

    Kudos to Patrick McHardy, Pablo Neira Ayuso, and others who have
    worked so hard on this.

 2) Daniel Borkmann and Hannes Frederic Sowa made several improvements
    to our pseudo-random number generator, mostly used for things like
    UDP port randomization and netfitler, amongst other things.

    In particular the taus88 generater is updated to taus113, and test
    cases are added.

 3) Support 64-bit rates in HTB and TBF schedulers, from Eric Dumazet
    and Yang Yingliang.

 4) Add support for new 577xx tigon3 chips to tg3 driver, from Nithin
    Sujir.

 5) Fix two fatal flaws in TCP dynamic right sizing, from Eric Dumazet,
    Neal Cardwell, and Yuchung Cheng.

 6) Allow IP_TOS and IP_TTL to be specified in sendmsg() ancillary
    control message data, much like other socket option attributes.
    From Francesco Fusco.

 7) Allow applications to specify a cap on the rate computed
    automatically by the kernel for pacing flows, via a new
    SO_MAX_PACING_RATE socket option.  From Eric Dumazet.

 8) Make the initial autotuned send buffer sizing in TCP more closely
    reflect actual needs, from Eric Dumazet.

 9) Currently early socket demux only happens for TCP sockets, but we
    can do it for connected UDP sockets too.  Implementation from Shawn
    Bohrer.

10) Refactor inet socket demux with the goal of improving hash demux
    performance for listening sockets.  With the main goals being able
    to use RCU lookups on even request sockets, and eliminating the
    listening lock contention.  From Eric Dumazet.

11) The bonding layer has many demuxes in it's fast path, and an RCU
    conversion was started back in 3.11, several changes here extend the
    RCU usage to even more locations.  From Ding Tianhong and Wang
    Yufen, based upon suggestions by Nikolay Aleksandrov and Veaceslav
    Falico.

12) Allow stackability of segmentation offloads to, in particular, allow
    segmentation offloading over tunnels.  From Eric Dumazet.

13) Significantly improve the handling of secret keys we input into the
    various hash functions in the inet hashtables, TCP fast open, as
    well as syncookies.  From Hannes Frederic Sowa.  The key fundamental
    operation is "net_get_random_once()" which uses static keys.

    Hannes even extended this to ipv4/ipv6 fragmentation handling and
    our generic flow dissector.

14) The generic driver layer takes care now to set the driver data to
    NULL on device removal, so it's no longer necessary for drivers to
    explicitly set it to NULL any more.  Many drivers have been cleaned
    up in this way, from Jingoo Han.

15) Add a BPF based packet scheduler classifier, from Daniel Borkmann.

16) Improve CRC32 interfaces and generic SKB checksum iterators so that
    SCTP's checksumming can more cleanly be handled.  Also from Daniel
    Borkmann.

17) Add a new PMTU discovery mode, IP_PMTUDISC_INTERFACE, which forces
    using the interface MTU value.  This helps avoid PMTU attacks,
    particularly on DNS servers.  From Hannes Frederic Sowa.

18) Use generic XPS for transmit queue steering rather than internal
    (re-)implementation in virtio-net.  From Jason Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  random32: add test cases for taus113 implementation
  random32: upgrade taus88 generator to taus113 from errata paper
  random32: move rnd_state to linux/random.h
  random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized
  random32: add periodic reseeding
  random32: fix off-by-one in seeding requirement
  PHY: Add RTL8201CP phy_driver to realtek
  xtsonic: add missing platform_set_drvdata() in xtsonic_probe()
  macmace: add missing platform_set_drvdata() in mace_probe()
  ethernet/arc/arc_emac: add missing platform_set_drvdata() in arc_emac_probe()
  ipv6: protect for_each_sk_fl_rcu in mem_check with rcu_read_lock_bh
  vlan: Implement vlan_dev_get_egress_qos_mask as an inline.
  ixgbe: add warning when max_vfs is out of range.
  igb: Update link modes display in ethtool
  netfilter: push reasm skb through instead of original frag skbs
  ip6_output: fragment outgoing reassembled skb properly
  MAINTAINERS: mv643xx_eth: take over maintainership from Lennart
  net_sched: tbf: support of 64bit rates
  ixgbe: deleting dfwd stations out of order can cause null ptr deref
  ixgbe: fix build err, num_rx_queues is only available with CONFIG_RPS
  ...

1 files changed, 60 insertions, 0 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index cc6035f..7ceed99 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -829,6 +829,15 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
  * @RX_FLAG_10MHZ: 10 MHz (half channel) was used
  * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
+ * @RX_FLAG_AMSDU_MORE: Some drivers may prefer to report separate A-MSDU
+ *	subframes instead of a one huge frame for performance reasons.
+ *	All, but the last MSDU from an A-MSDU should have this flag set. E.g.
+ *	if an A-MSDU has 3 frames, the first 2 must have the flag set, while
+ *	the 3rd (last) one must not have this flag set. The flag is used to
+ *	deal with retransmission/duplication recovery properly since A-MSDU
+ *	subframes share the same sequence number. Reported subframes can be
+ *	either regular MSDU or singly A-MSDUs. Subframes must not be
+ *	interleaved with other frames.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -859,6 +868,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_STBC_MASK		= BIT(26) | BIT(27),
 	RX_FLAG_10MHZ			= BIT(28),
 	RX_FLAG_5MHZ			= BIT(29),
+	RX_FLAG_AMSDU_MORE		= BIT(30),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
@@ -1492,6 +1502,15 @@ struct ieee80211_tx_control {
  *
  * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames
  *	only, to allow getting TBTT of a DTIM beacon.
+ *
+ * @IEEE80211_HW_SUPPORTS_HT_CCK_RATES: Hardware supports mixing HT/CCK rates
+ *	and can cope with CCK rates in an aggregation session (e.g. by not
+ *	using aggregation for such frames.)
+ *
+ * @IEEE80211_HW_CHANCTX_STA_CSA: Support 802.11h based channel-switch (CSA)
+ *	for a single active channel while using channel contexts. When support
+ *	is not enabled the default action is to disconnect when getting the
+ *	CSA frame.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1522,6 +1541,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
+	IEEE80211_HW_CHANCTX_STA_CSA			= 1<<28,
 };
 
 /**
@@ -2666,6 +2686,10 @@ enum ieee80211_roc_type {
  *	zero using ieee80211_csa_is_complete() after the beacon has been
  *	transmitted and then call ieee80211_csa_finish().
  *
+ * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all
+ *	information in bss_conf is set up and the beacon can be retrieved. A
+ *	channel context is bound before this is called.
+ * @leave_ibss: Leave the IBSS again.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2857,6 +2881,9 @@ struct ieee80211_ops {
 	void (*channel_switch_beacon)(struct ieee80211_hw *hw,
 				      struct ieee80211_vif *vif,
 				      struct cfg80211_chan_def *chandef);
+
+	int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 };
 
 /**
@@ -3920,6 +3947,25 @@ void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
 						void *data);
 
 /**
+ * ieee80211_iterate_active_interfaces_rtnl - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This version can only be used while holding the RTNL.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_rtnl(struct ieee80211_hw *hw,
+					      u32 iter_flags,
+					      void (*iterator)(void *data,
+						u8 *mac,
+						struct ieee80211_vif *vif),
+					      void *data);
+
+/**
  * ieee80211_queue_work - add work onto the mac80211 workqueue
  *
  * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
@@ -4525,4 +4571,18 @@ void ieee80211_report_wowlan_wakeup(struct ieee80211_vif *vif,
 				    struct cfg80211_wowlan_wakeup *wakeup,
 				    gfp_t gfp);
 
+/**
+ * ieee80211_tx_prepare_skb - prepare an 802.11 skb for transmission
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @vif: virtual interface
+ * @skb: frame to be sent from within the driver
+ * @band: the band to transmit on
+ * @sta: optional pointer to get the station to send the frame to
+ *
+ * Note: must be called under RCU lock
+ */
+bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif, struct sk_buff *skb,
+			      int band, struct ieee80211_sta **sta);
+
 #endif /* MAC80211_H */