Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...

1 files changed, 203 insertions, 38 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a2ddcf2..4ebb816 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -319,9 +319,12 @@ struct ieee80211_supported_band {
 /**
  * struct vif_params - describes virtual interface parameters
  * @use_4addr: use 4-address frames
- * @macaddr: address to use for this virtual interface. This will only
- * 	be used for non-netdevice interfaces. If this parameter is set
- * 	to zero address the driver may determine the address as needed.
+ * @macaddr: address to use for this virtual interface.
+ *	If this parameter is set to zero address the driver may
+ *	determine the address as needed.
+ *	This feature is only fully supported by drivers that enable the
+ *	%NL80211_FEATURE_MAC_ON_CREATE flag.  Others may support creating
+ **	only p2p devices with specified MAC.
  */
 struct vif_params {
        int use_4addr;
@@ -799,6 +802,22 @@ struct station_parameters {
 };
 
 /**
+ * struct station_del_parameters - station deletion parameters
+ *
+ * Used to delete a station entry (or all stations).
+ *
+ * @mac: MAC address of the station to remove or NULL to remove all stations
+ * @subtype: Management frame subtype to use for indicating removal
+ *	(10 = Disassociation, 12 = Deauthentication)
+ * @reason_code: Reason code for the Disassociation/Deauthentication frame
+ */
+struct station_del_parameters {
+	const u8 *mac;
+	u8 subtype;
+	u16 reason_code;
+};
+
+/**
  * enum cfg80211_station_type - the type of station being modified
  * @CFG80211_STA_AP_CLIENT: client of an AP interface
  * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has
@@ -1340,6 +1359,16 @@ struct mesh_setup {
 };
 
 /**
+ * struct ocb_setup - 802.11p OCB mode setup configuration
+ * @chandef: defines the channel to use
+ *
+ * These parameters are fixed when connecting to the network
+ */
+struct ocb_setup {
+	struct cfg80211_chan_def chandef;
+};
+
+/**
  * struct ieee80211_txq_params - TX queue parameters
  * @ac: AC identifier
  * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -1408,6 +1437,10 @@ struct cfg80211_ssid {
  * @aborted: (internal) scan request was notified as aborted
  * @notified: (internal) scan request was notified as done or aborted
  * @no_cck: used to send probe requests at non CCK rate in 2GHz band
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ *	are 0 in the mask should be randomised, bits that are 1 should
+ *	be taken from the @mac_addr
  */
 struct cfg80211_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1422,6 +1455,9 @@ struct cfg80211_scan_request {
 
 	struct wireless_dev *wdev;
 
+	u8 mac_addr[ETH_ALEN] __aligned(2);
+	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
 	/* internal */
 	struct wiphy *wiphy;
 	unsigned long scan_start;
@@ -1432,6 +1468,17 @@ struct cfg80211_scan_request {
 	struct ieee80211_channel *channels[0];
 };
 
+static inline void get_random_mask_addr(u8 *buf, const u8 *addr, const u8 *mask)
+{
+	int i;
+
+	get_random_bytes(buf, ETH_ALEN);
+	for (i = 0; i < ETH_ALEN; i++) {
+		buf[i] &= ~mask[i];
+		buf[i] |= addr[i] & mask[i];
+	}
+}
+
 /**
  * struct cfg80211_match_set - sets of attributes to match
  *
@@ -1465,6 +1512,10 @@ struct cfg80211_match_set {
  * @channels: channels to scan
  * @min_rssi_thold: for drivers only supporting a single threshold, this
  *	contains the minimum over all matchsets
+ * @mac_addr: MAC address used with randomisation
+ * @mac_addr_mask: MAC address mask used with randomisation, bits that
+ *	are 0 in the mask should be randomised, bits that are 1 should
+ *	be taken from the @mac_addr
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1479,6 +1530,9 @@ struct cfg80211_sched_scan_request {
 	int n_match_sets;
 	s32 min_rssi_thold;
 
+	u8 mac_addr[ETH_ALEN] __aligned(2);
+	u8 mac_addr_mask[ETH_ALEN] __aligned(2);
+
 	/* internal */
 	struct wiphy *wiphy;
 	struct net_device *dev;
@@ -1911,6 +1965,7 @@ struct cfg80211_wowlan_tcp {
  * @rfkill_release: wake up when rfkill is released
  * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h.
  *	NULL if not configured.
+ * @nd_config: configuration for the scan to be used for net detect wake.
  */
 struct cfg80211_wowlan {
 	bool any, disconnect, magic_pkt, gtk_rekey_failure,
@@ -1919,6 +1974,7 @@ struct cfg80211_wowlan {
 	struct cfg80211_pkt_pattern *patterns;
 	struct cfg80211_wowlan_tcp *tcp;
 	int n_patterns;
+	struct cfg80211_sched_scan_request *nd_config;
 };
 
 /**
@@ -1951,6 +2007,35 @@ struct cfg80211_coalesce {
 };
 
 /**
+ * struct cfg80211_wowlan_nd_match - information about the match
+ *
+ * @ssid: SSID of the match that triggered the wake up
+ * @n_channels: Number of channels where the match occurred.  This
+ *	value may be zero if the driver can't report the channels.
+ * @channels: center frequencies of the channels where a match
+ *	occurred (in MHz)
+ */
+struct cfg80211_wowlan_nd_match {
+	struct cfg80211_ssid ssid;
+	int n_channels;
+	u32 channels[];
+};
+
+/**
+ * struct cfg80211_wowlan_nd_info - net detect wake up information
+ *
+ * @n_matches: Number of match information instances provided in
+ *	@matches.  This value may be zero if the driver can't provide
+ *	match information.
+ * @matches: Array of pointers to matches containing information about
+ *	the matches that triggered the wake up.
+ */
+struct cfg80211_wowlan_nd_info {
+	int n_matches;
+	struct cfg80211_wowlan_nd_match *matches[];
+};
+
+/**
  * struct cfg80211_wowlan_wakeup - wakeup report
  * @disconnect: woke up by getting disconnected
  * @magic_pkt: woke up by receiving magic packet
@@ -1969,6 +2054,7 @@ struct cfg80211_coalesce {
  * @tcp_match: TCP wakeup packet received
  * @tcp_connlost: TCP connection lost or failed to establish
  * @tcp_nomoretokens: TCP data ran out of tokens
+ * @net_detect: if not %NULL, woke up because of net detect
  */
 struct cfg80211_wowlan_wakeup {
 	bool disconnect, magic_pkt, gtk_rekey_failure,
@@ -1978,6 +2064,7 @@ struct cfg80211_wowlan_wakeup {
 	s32 pattern_idx;
 	u32 packet_present_len, packet_len;
 	const void *packet;
+	struct cfg80211_wowlan_nd_info *net_detect;
 };
 
 /**
@@ -2132,7 +2219,7 @@ struct cfg80211_qos_map {
  * @stop_ap: Stop being an AP, including stopping beaconing.
  *
  * @add_station: Add a new station.
- * @del_station: Remove a station; @mac may be NULL to remove all stations.
+ * @del_station: Remove a station
  * @change_station: Modify a given station. Note that flags changes are not much
  *	validated in cfg80211, in particular the auth/assoc/authorized flags
  *	might come to the driver in invalid combinations -- make sure to check
@@ -2146,6 +2233,8 @@ struct cfg80211_qos_map {
  * @change_mpath: change a given mesh path
  * @get_mpath: get a mesh path for the given parameters
  * @dump_mpath: dump mesh path callback -- resume dump at index @idx
+ * @get_mpp: get a mesh proxy path for the given parameters
+ * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx
  * @join_mesh: join the mesh network with the specified parameters
  *	(invoked with the wireless_dev mutex held)
  * @leave_mesh: leave the current mesh network
@@ -2331,6 +2420,17 @@ struct cfg80211_qos_map {
  *	with the peer followed by immediate teardown when the addition is later
  *	rejected)
  * @del_tx_ts: remove an existing TX TS
+ *
+ * @join_ocb: join the OCB network with the specified parameters
+ *	(invoked with the wireless_dev mutex held)
+ * @leave_ocb: leave the current OCB network
+ *	(invoked with the wireless_dev mutex held)
+ *
+ * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver
+ *	is responsible for continually initiating channel-switching operations
+ *	and returning to the base channel for communication with the AP.
+ * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
+ *	peers must be on the base channel when the call completes.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2376,7 +2476,7 @@ struct cfg80211_ops {
 			       const u8 *mac,
 			       struct station_parameters *params);
 	int	(*del_station)(struct wiphy *wiphy, struct net_device *dev,
-			       const u8 *mac);
+			       struct station_del_parameters *params);
 	int	(*change_station)(struct wiphy *wiphy, struct net_device *dev,
 				  const u8 *mac,
 				  struct station_parameters *params);
@@ -2396,6 +2496,11 @@ struct cfg80211_ops {
 	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *dst, u8 *next_hop,
 			      struct mpath_info *pinfo);
+	int	(*get_mpp)(struct wiphy *wiphy, struct net_device *dev,
+			   u8 *dst, u8 *mpp, struct mpath_info *pinfo);
+	int	(*dump_mpp)(struct wiphy *wiphy, struct net_device *dev,
+			    int idx, u8 *dst, u8 *mpp,
+			    struct mpath_info *pinfo);
 	int	(*get_mesh_config)(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct mesh_config *conf);
@@ -2407,6 +2512,10 @@ struct cfg80211_ops {
 			     const struct mesh_setup *setup);
 	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
 
+	int	(*join_ocb)(struct wiphy *wiphy, struct net_device *dev,
+			    struct ocb_setup *setup);
+	int	(*leave_ocb)(struct wiphy *wiphy, struct net_device *dev);
+
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
 
@@ -2577,6 +2686,14 @@ struct cfg80211_ops {
 			     u16 admitted_time);
 	int	(*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 tsid, const u8 *peer);
+
+	int	(*tdls_channel_switch)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       const u8 *addr, u8 oper_class,
+				       struct cfg80211_chan_def *chandef);
+	void	(*tdls_cancel_channel_switch)(struct wiphy *wiphy,
+					      struct net_device *dev,
+					      const u8 *addr);
 };
 
 /*
@@ -2623,13 +2740,9 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
  * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in
  *	beaconing mode (AP, IBSS, Mesh, ...).
- * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
- *	TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS
- *	command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
- *	needs to be able to handle Block-Ack agreements and other things.
  */
 enum wiphy_flags {
-	WIPHY_FLAG_SUPPORTS_WMM_ADMISSION	= BIT(0),
+	/* use hole at 0 */
 	/* use hole at 1 */
 	/* use hole at 2 */
 	WIPHY_FLAG_NETNS_OK			= BIT(3),
@@ -2755,6 +2868,7 @@ struct ieee80211_txrx_stypes {
  * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
  * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
  * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
+ * @WIPHY_WOWLAN_NET_DETECT: supports wakeup on network detection
  */
 enum wiphy_wowlan_support_flags {
 	WIPHY_WOWLAN_ANY		= BIT(0),
@@ -2765,6 +2879,7 @@ enum wiphy_wowlan_support_flags {
 	WIPHY_WOWLAN_EAP_IDENTITY_REQ	= BIT(5),
 	WIPHY_WOWLAN_4WAY_HANDSHAKE	= BIT(6),
 	WIPHY_WOWLAN_RFKILL_RELEASE	= BIT(7),
+	WIPHY_WOWLAN_NET_DETECT		= BIT(8),
 };
 
 struct wiphy_wowlan_tcp_support {
@@ -2783,6 +2898,11 @@ struct wiphy_wowlan_tcp_support {
  * @pattern_max_len: maximum length of each pattern
  * @pattern_min_len: minimum length of each pattern
  * @max_pkt_offset: maximum Rx packet offset
+ * @max_nd_match_sets: maximum number of matchsets for net-detect,
+ *	similar, but not necessarily identical, to max_match_sets for
+ *	scheduled scans.
+ *	See &struct cfg80211_sched_scan_request.@match_sets for more
+ *	details.
  * @tcp: TCP wakeup support information
  */
 struct wiphy_wowlan_support {
@@ -2791,6 +2911,7 @@ struct wiphy_wowlan_support {
 	int pattern_max_len;
 	int pattern_min_len;
 	int max_pkt_offset;
+	int max_nd_match_sets;
 	const struct wiphy_wowlan_tcp_support *tcp;
 };
 
@@ -3166,6 +3287,23 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
 }
 
 /**
+ * wiphy_new_nm - create a new wiphy for use with cfg80211
+ *
+ * @ops: The configuration operations for this device
+ * @sizeof_priv: The size of the private area to allocate
+ * @requested_name: Request a particular name.
+ *	NULL is valid value, and means use the default phy%d naming.
+ *
+ * Create a new wiphy and associate the given operations with it.
+ * @sizeof_priv bytes are allocated for private use.
+ *
+ * Return: A pointer to the new wiphy. This pointer must be
+ * assigned to each netdev's ieee80211_ptr for proper operation.
+ */
+struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
+			   const char *requested_name);
+
+/**
  * wiphy_new - create a new wiphy for use with cfg80211
  *
  * @ops: The configuration operations for this device
@@ -3177,7 +3315,11 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
  * Return: A pointer to the new wiphy. This pointer must be
  * assigned to each netdev's ieee80211_ptr for proper operation.
  */
-struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
+static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops,
+				      int sizeof_priv)
+{
+	return wiphy_new_nm(ops, sizeof_priv, NULL);
+}
 
 /**
  * wiphy_register - register a wiphy with cfg80211
@@ -4501,33 +4643,6 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 			      gfp_t gfp);
 
 /**
- * cfg80211_radar_event - radar detection event
- * @wiphy: the wiphy
- * @chandef: chandef for the current channel
- * @gfp: context flags
- *
- * This function is called when a radar is detected on the current chanenl.
- */
-void cfg80211_radar_event(struct wiphy *wiphy,
-			  struct cfg80211_chan_def *chandef, gfp_t gfp);
-
-/**
- * cfg80211_cac_event - Channel availability check (CAC) event
- * @netdev: network device
- * @chandef: chandef for the current channel
- * @event: type of event
- * @gfp: context flags
- *
- * This function is called when a Channel availability check (CAC) is finished
- * or aborted. This must be called to notify the completion of a CAC process,
- * also by full-MAC drivers.
- */
-void cfg80211_cac_event(struct net_device *netdev,
-			const struct cfg80211_chan_def *chandef,
-			enum nl80211_radar_event event, gfp_t gfp);
-
-
-/**
  * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
  * @dev: network device
  * @peer: peer's MAC address
@@ -4555,6 +4670,42 @@ void cfg80211_cqm_txe_notify(struct net_device *dev, const u8 *peer,
 			     u32 num_packets, u32 rate, u32 intvl, gfp_t gfp);
 
 /**
+ * cfg80211_cqm_beacon_loss_notify - beacon loss event
+ * @dev: network device
+ * @gfp: context flags
+ *
+ * Notify userspace about beacon loss from the connected AP.
+ */
+void cfg80211_cqm_beacon_loss_notify(struct net_device *dev, gfp_t gfp);
+
+/**
+ * cfg80211_radar_event - radar detection event
+ * @wiphy: the wiphy
+ * @chandef: chandef for the current channel
+ * @gfp: context flags
+ *
+ * This function is called when a radar is detected on the current chanenl.
+ */
+void cfg80211_radar_event(struct wiphy *wiphy,
+			  struct cfg80211_chan_def *chandef, gfp_t gfp);
+
+/**
+ * cfg80211_cac_event - Channel availability check (CAC) event
+ * @netdev: network device
+ * @chandef: chandef for the current channel
+ * @event: type of event
+ * @gfp: context flags
+ *
+ * This function is called when a Channel availability check (CAC) is finished
+ * or aborted. This must be called to notify the completion of a CAC process,
+ * also by full-MAC drivers.
+ */
+void cfg80211_cac_event(struct net_device *netdev,
+			const struct cfg80211_chan_def *chandef,
+			enum nl80211_radar_event event, gfp_t gfp);
+
+
+/**
  * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
  * @dev: network device
  * @bssid: BSSID of AP (to avoid races)
@@ -4657,6 +4808,20 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
 void cfg80211_ch_switch_notify(struct net_device *dev,
 			       struct cfg80211_chan_def *chandef);
 
+/*
+ * cfg80211_ch_switch_started_notify - notify channel switch start
+ * @dev: the device on which the channel switch started
+ * @chandef: the future channel definition
+ * @count: the number of TBTTs until the channel switch happens
+ *
+ * Inform the userspace about the channel switch that has just
+ * started, so that it can take appropriate actions (eg. starting
+ * channel switch on other vifs), if necessary.
+ */
+void cfg80211_ch_switch_started_notify(struct net_device *dev,
+				       struct cfg80211_chan_def *chandef,
+				       u8 count);
+
 /**
  * ieee80211_operating_class_to_band - convert operating class to band
  *