Merge branch 'master' into for-next

Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.

23 files changed, 1414 insertions, 74 deletions

diff --git a/include/media/adp1653.h b/include/media/adp1653.h
new file mode 100644
index 0000000..50a1af8
--- /dev/null
+++ b/include/media/adp1653.h
@@ -0,0 +1,126 @@
+/*
+ * include/media/adp1653.h
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ADP1653_H
+#define ADP1653_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define ADP1653_NAME				"adp1653"
+#define ADP1653_I2C_ADDR			(0x60 >> 1)
+
+/* Register definitions */
+#define ADP1653_REG_OUT_SEL			0x00
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN	0x01
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX	0x0b
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN	0x0c
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX	0x1f
+#define ADP1653_REG_OUT_SEL_HPLED_SHIFT		3
+#define ADP1653_REG_OUT_SEL_ILED_MAX		0x07
+#define ADP1653_REG_OUT_SEL_ILED_SHIFT		0
+
+#define ADP1653_REG_CONFIG			0x01
+#define ADP1653_REG_CONFIG_TMR_CFG		(1 << 4)
+#define ADP1653_REG_CONFIG_TMR_SET_MAX		0x0f
+#define ADP1653_REG_CONFIG_TMR_SET_SHIFT	0
+
+#define ADP1653_REG_SW_STROBE			0x02
+#define ADP1653_REG_SW_STROBE_SW_STROBE		(1 << 0)
+
+#define ADP1653_REG_FAULT			0x03
+#define ADP1653_REG_FAULT_FLT_SCP		(1 << 3)
+#define ADP1653_REG_FAULT_FLT_OT		(1 << 2)
+#define ADP1653_REG_FAULT_FLT_TMR		(1 << 1)
+#define ADP1653_REG_FAULT_FLT_OV		(1 << 0)
+
+#define ADP1653_INDICATOR_INTENSITY_MIN		0
+#define ADP1653_INDICATOR_INTENSITY_STEP	2500
+#define ADP1653_INDICATOR_INTENSITY_MAX		\
+	(ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \
+	((a) / ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \
+	((a) * ADP1653_INDICATOR_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_BASE		35
+#define ADP1653_FLASH_INTENSITY_STEP		15
+#define ADP1653_FLASH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_FLASH_INTENSITY_MAX			\
+	(ADP1653_FLASH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a)				\
+	((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 :			\
+	 (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP))
+#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a)		\
+	((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE)
+
+#define ADP1653_TORCH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_TORCH_INTENSITY_MAX			\
+	(ADP1653_TORCH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+struct adp1653_platform_data {
+	int (*power)(struct v4l2_subdev *sd, int on);
+
+	u32 max_flash_timeout;		/* flash light timeout in us */
+	u32 max_flash_intensity;	/* led intensity, flash mode */
+	u32 max_torch_intensity;	/* led intensity, torch mode */
+	u32 max_indicator_intensity;	/* indicator led intensity */
+};
+
+#define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)
+
+struct adp1653_flash {
+	struct v4l2_subdev subdev;
+	struct adp1653_platform_data *platform_data;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *led_mode;
+	struct v4l2_ctrl *flash_timeout;
+	struct v4l2_ctrl *flash_intensity;
+	struct v4l2_ctrl *torch_intensity;
+	struct v4l2_ctrl *indicator_intensity;
+
+	struct mutex power_lock;
+	int power_count;
+	int fault;
+};
+
+#endif /* ADP1653_H */
diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
new file mode 100644
index 0000000..26cece5
--- /dev/null
+++ b/include/media/atmel-isi.h
@@ -0,0 +1,119 @@
+/*
+ * Register definitions for the Atmel Image Sensor Interface.
+ *
+ * Copyright (C) 2011 Atmel Corporation
+ * Josh Wu, <josh.wu@atmel.com>
+ *
+ * Based on previous work by Lars Haring, <lars.haring@atmel.com>
+ * and Sedji Gaouaou
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ATMEL_ISI_H__
+#define __ATMEL_ISI_H__
+
+#include <linux/types.h>
+
+/* ISI_V2 register offsets */
+#define ISI_CFG1				0x0000
+#define ISI_CFG2				0x0004
+#define ISI_PSIZE				0x0008
+#define ISI_PDECF				0x000c
+#define ISI_Y2R_SET0				0x0010
+#define ISI_Y2R_SET1				0x0014
+#define ISI_R2Y_SET0				0x0018
+#define ISI_R2Y_SET1				0x001C
+#define ISI_R2Y_SET2				0x0020
+#define ISI_CTRL				0x0024
+#define ISI_STATUS				0x0028
+#define ISI_INTEN				0x002C
+#define ISI_INTDIS				0x0030
+#define ISI_INTMASK				0x0034
+#define ISI_DMA_CHER				0x0038
+#define ISI_DMA_CHDR				0x003C
+#define ISI_DMA_CHSR				0x0040
+#define ISI_DMA_P_ADDR				0x0044
+#define ISI_DMA_P_CTRL				0x0048
+#define ISI_DMA_P_DSCR				0x004C
+#define ISI_DMA_C_ADDR				0x0050
+#define ISI_DMA_C_CTRL				0x0054
+#define ISI_DMA_C_DSCR				0x0058
+
+/* Bitfields in CFG1 */
+#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW		(1 << 2)
+#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW		(1 << 3)
+#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING	(1 << 4)
+#define ISI_CFG1_EMB_SYNC			(1 << 6)
+#define ISI_CFG1_CRC_SYNC			(1 << 7)
+/* Constants for FRATE(ISI_V2) */
+#define		ISI_CFG1_FRATE_CAPTURE_ALL	(0 << 8)
+#define		ISI_CFG1_FRATE_DIV_2		(1 << 8)
+#define		ISI_CFG1_FRATE_DIV_3		(2 << 8)
+#define		ISI_CFG1_FRATE_DIV_4		(3 << 8)
+#define		ISI_CFG1_FRATE_DIV_5		(4 << 8)
+#define		ISI_CFG1_FRATE_DIV_6		(5 << 8)
+#define		ISI_CFG1_FRATE_DIV_7		(6 << 8)
+#define		ISI_CFG1_FRATE_DIV_8		(7 << 8)
+#define ISI_CFG1_DISCR				(1 << 11)
+#define ISI_CFG1_FULL_MODE			(1 << 12)
+
+/* Bitfields in CFG2 */
+#define ISI_CFG2_GRAYSCALE			(1 << 13)
+/* Constants for YCC_SWAP(ISI_V2) */
+#define		ISI_CFG2_YCC_SWAP_DEFAULT	(0 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_1	(1 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_2	(2 << 28)
+#define		ISI_CFG2_YCC_SWAP_MODE_3	(3 << 28)
+#define ISI_CFG2_IM_VSIZE_OFFSET		0
+#define ISI_CFG2_IM_HSIZE_OFFSET		16
+#define ISI_CFG2_IM_VSIZE_MASK		(0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
+#define ISI_CFG2_IM_HSIZE_MASK		(0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
+
+/* Bitfields in CTRL */
+/* Also using in SR(ISI_V2) */
+#define ISI_CTRL_EN				(1 << 0)
+#define ISI_CTRL_CDC				(1 << 8)
+/* Also using in SR/IER/IDR/IMR(ISI_V2) */
+#define ISI_CTRL_DIS				(1 << 1)
+#define ISI_CTRL_SRST				(1 << 2)
+
+/* Bitfields in SR */
+#define ISI_SR_SIP				(1 << 19)
+/* Also using in SR/IER/IDR/IMR */
+#define ISI_SR_VSYNC				(1 << 10)
+#define ISI_SR_PXFR_DONE			(1 << 16)
+#define ISI_SR_CXFR_DONE			(1 << 17)
+#define ISI_SR_P_OVR				(1 << 24)
+#define ISI_SR_C_OVR				(1 << 25)
+#define ISI_SR_CRC_ERR				(1 << 26)
+#define ISI_SR_FR_OVR				(1 << 27)
+
+/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */
+#define ISI_DMA_CTRL_FETCH			(1 << 0)
+#define ISI_DMA_CTRL_WB				(1 << 1)
+#define ISI_DMA_CTRL_IEN			(1 << 2)
+#define ISI_DMA_CTRL_DONE			(1 << 3)
+
+/* Bitfields in DMA_CHSR/CHER/CHDR */
+#define ISI_DMA_CHSR_P_CH			(1 << 0)
+#define ISI_DMA_CHSR_C_CH			(1 << 1)
+
+/* Definition for isi_platform_data */
+#define ISI_DATAWIDTH_8				0x01
+#define ISI_DATAWIDTH_10			0x02
+
+struct isi_platform_data {
+	u8 has_emb_sync;
+	u8 emb_crc_sync;
+	u8 hsync_act_low;
+	u8 vsync_act_low;
+	u8 pclk_act_falling;
+	u8 isi_full_mode;
+	u32 data_width_flags;
+	/* Using for ISI_CFG1 */
+	u32 frate;
+};
+
+#endif /* __ATMEL_ISI_H__ */
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
new file mode 100644
index 0000000..8b11fb0
--- /dev/null
+++ b/include/media/davinci/vpbe.h
@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_H
+#define _VPBE_H
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_types.h>
+
+/* OSD configuration info */
+struct osd_config_info {
+	char module_name[32];
+};
+
+struct vpbe_output {
+	struct v4l2_output output;
+	/*
+	 * If output capabilities include dv_preset, list supported presets
+	 * below
+	 */
+	char *subdev_name;
+	/*
+	 * defualt_mode identifies the default timings set at the venc or
+	 * external encoder.
+	 */
+	char *default_mode;
+	/*
+	 * Fields below are used for supporting multiple modes. For example,
+	 * LCD panel might support different modes and they are listed here.
+	 * Similarly for supporting external encoders, lcd controller port
+	 * requires a set of non-standard timing values to be listed here for
+	 * each supported mode since venc is used in non-standard timing mode
+	 * for interfacing with external encoder similar to configuring lcd
+	 * panel timings
+	 */
+	unsigned int num_modes;
+	struct vpbe_enc_mode_info *modes;
+	/*
+	 * Bus configuration goes here for external encoders. Some encoders
+	 * may require multiple interface types for each of the output. For
+	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
+	 * Not sure if this is needed on a per mode basis instead of per
+	 * output basis. If per mode is needed, we may have to move this to
+	 * mode_info structure
+	 */
+};
+
+/* encoder configuration info */
+struct encoder_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/* structure for defining vpbe display subsystem components */
+struct vpbe_config {
+	char module_name[32];
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	struct osd_config_info osd;
+	struct encoder_config_info venc;
+	/* external encoder information goes here */
+	int num_ext_encoders;
+	struct encoder_config_info *ext_encoders;
+	int num_outputs;
+	/* Order is venc outputs followed by LCD and then external encoders */
+	struct vpbe_output *outputs;
+};
+
+struct vpbe_device;
+
+struct vpbe_device_ops {
+	/* crop cap for the display */
+	int (*g_cropcap)(struct vpbe_device *vpbe_dev,
+			 struct v4l2_cropcap *cropcap);
+
+	/* Enumerate the outputs */
+	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
+			    struct v4l2_output *output);
+
+	/* Set output to the given index */
+	int (*set_output)(struct vpbe_device *vpbe_dev,
+			 int index);
+
+	/* Get current output */
+	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
+
+	/* Set DV preset at current output */
+	int (*s_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Get DV presets supported at the output */
+	int (*g_dv_preset)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_preset *dv_preset);
+
+	/* Enumerate the DV Presets supported at the output */
+	int (*enum_dv_presets)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_dv_enum_preset *preset_info);
+
+	/* Set std at the output */
+	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* Get the current std at the output */
+	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* initialize the device */
+	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* De-initialize the device */
+	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* Get the current mode info */
+	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
+			     struct vpbe_enc_mode_info*);
+
+	/*
+	 * Set the current mode in the encoder. Alternate way of setting
+	 * standard or DV preset or custom timings in the encoder
+	 */
+	int (*set_mode)(struct vpbe_device *vpbe_dev,
+			struct vpbe_enc_mode_info*);
+	/* Power management operations */
+	int (*suspend)(struct vpbe_device *vpbe_dev);
+	int (*resume)(struct vpbe_device *vpbe_dev);
+};
+
+/* struct for vpbe device */
+struct vpbe_device {
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* vpbe dispay controller cfg */
+	struct vpbe_config *cfg;
+	/* parent device */
+	struct device *pdev;
+	/* external encoder v4l2 sub devices */
+	struct v4l2_subdev **encoders;
+	/* current encoder index */
+	int current_sd_index;
+	struct mutex lock;
+	/* device initialized */
+	int initialized;
+	/* vpbe dac clock */
+	struct clk *dac_clk;
+	/* osd_device pointer */
+	struct osd_state *osd_device;
+	/*
+	 * fields below are accessed by users of vpbe_device. Not the
+	 * ones above
+	 */
+
+	/* current output */
+	int current_out_index;
+	/* lock used by caller to do atomic operation on vpbe device */
+	/* current timings set in the controller */
+	struct vpbe_enc_mode_info current_timings;
+	/* venc sub device */
+	struct v4l2_subdev *venc;
+	/* device operations below */
+	struct vpbe_device_ops ops;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
new file mode 100644
index 0000000..dbf6b37
--- /dev/null
+++ b/include/media/davinci/vpbe_display.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef VPBE_DISPLAY_H
+#define VPBE_DISPLAY_H
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe.h>
+
+#define VPBE_DISPLAY_MAX_DEVICES 2
+
+enum vpbe_display_device_id {
+	VPBE_DISPLAY_DEVICE_0,
+	VPBE_DISPLAY_DEVICE_1
+};
+
+#define VPBE_DISPLAY_DRV_NAME	"vpbe-display"
+
+#define VPBE_DISPLAY_MAJOR_RELEASE              1
+#define VPBE_DISPLAY_MINOR_RELEASE              0
+#define VPBE_DISPLAY_BUILD                      1
+#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
+	(VPBE_DISPLAY_MINOR_RELEASE << 8)  | \
+	VPBE_DISPLAY_BUILD)
+
+#define VPBE_DISPLAY_VALID_FIELD(field)   ((V4L2_FIELD_NONE == field) || \
+	 (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
+
+/* Exp ratio numerator and denominator constants */
+#define VPBE_DISPLAY_H_EXP_RATIO_N	9
+#define VPBE_DISPLAY_H_EXP_RATIO_D	8
+#define VPBE_DISPLAY_V_EXP_RATIO_N	6
+#define VPBE_DISPLAY_V_EXP_RATIO_D	5
+
+/* Zoom multiplication factor */
+#define VPBE_DISPLAY_ZOOM_4X	4
+#define VPBE_DISPLAY_ZOOM_2X	2
+
+/* Structures */
+struct display_layer_info {
+	int enable;
+	/* Layer ID used by Display Manager */
+	enum osd_layer id;
+	struct osd_layer_config config;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	enum osd_h_exp_ratio h_exp;
+	enum osd_v_exp_ratio v_exp;
+};
+
+/* vpbe display object structure */
+struct vpbe_layer {
+	/* number of buffers in fbuffers */
+	unsigned int numbuffers;
+	/* Pointer to the vpbe_display */
+	struct vpbe_display *disp_dev;
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/* videobuf specific parameters
+	 * Buffer queue used in video-buf
+	 */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* V4l2 specific parameters */
+	/* Identifies video device for this layer */
+	struct video_device video_dev;
+	/* This field keeps track of type of buffer exchange mechanism user
+	 * has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* Used to store pixel format */
+	struct v4l2_pix_format pix_fmt;
+	enum v4l2_field buf_field;
+	/* Video layer configuration params */
+	struct display_layer_info layer_info;
+	/* vpbe specific parameters
+	 * enable window for display
+	 */
+	unsigned char window_enable;
+	/* number of open instances of the layer */
+	unsigned int usrs;
+	/* number of users performing IO */
+	unsigned int io_usrs;
+	/* Indicates id of the field which is being displayed */
+	unsigned int field_id;
+	/* Indicates whether streaming started */
+	unsigned char started;
+	/* Identifies device object */
+	enum vpbe_display_device_id device_id;
+	/* facilitation of ioctl ops lock by v4l2*/
+	struct mutex opslock;
+	u8 layer_first_int;
+};
+
+/* vpbe device structure */
+struct vpbe_display {
+	/* layer specific parameters */
+	/* lock for isr updates to buf layers*/
+	spinlock_t dma_queue_lock;
+	/* C-Plane offset from start of y-plane */
+	unsigned int cbcr_ofst;
+	struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
+	struct vpbe_device *vpbe_dev;
+	struct osd_state *osd_device;
+};
+
+/* File handle structure */
+struct vpbe_fh {
+	/* vpbe device structure */
+	struct vpbe_display *disp_dev;
+	/* pointer to layer object for opened device */
+	struct vpbe_layer *layer;
+	/* Indicates whether this file handle is doing IO */
+	unsigned char io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct buf_config_params {
+	unsigned char min_numbuffers;
+	unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+};
+
+#endif	/* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
new file mode 100644
index 0000000..d7e397a
--- /dev/null
+++ b/include/media/davinci/vpbe_osd.h
@@ -0,0 +1,394 @@
+/*
+ * Copyright (C) 2007-2009 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef _OSD_H
+#define _OSD_H
+
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_OSD_SUBDEV_NAME "vpbe-osd"
+
+/**
+ * enum osd_layer
+ * @WIN_OSD0: On-Screen Display Window 0
+ * @WIN_VID0: Video Window 0
+ * @WIN_OSD1: On-Screen Display Window 1
+ * @WIN_VID1: Video Window 1
+ *
+ * Description:
+ * An enumeration of the osd display layers.
+ */
+enum osd_layer {
+	WIN_OSD0,
+	WIN_VID0,
+	WIN_OSD1,
+	WIN_VID1,
+};
+
+/**
+ * enum osd_win_layer
+ * @OSDWIN_OSD0: On-Screen Display Window 0
+ * @OSDWIN_OSD1: On-Screen Display Window 1
+ *
+ * Description:
+ * An enumeration of the OSD Window layers.
+ */
+enum osd_win_layer {
+	OSDWIN_OSD0,
+	OSDWIN_OSD1,
+};
+
+/**
+ * enum osd_pix_format
+ * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
+ * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
+ * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
+ * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
+ * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
+ * @PIXFMT_YCbCrI: YUV 4:2:2
+ * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
+ * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap
+ * @PIXFMT_NV12: YUV 4:2:0 planar
+ * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel formats.
+ */
+enum osd_pix_format {
+	PIXFMT_1BPP = 0,
+	PIXFMT_2BPP,
+	PIXFMT_4BPP,
+	PIXFMT_8BPP,
+	PIXFMT_RGB565,
+	PIXFMT_YCbCrI,
+	PIXFMT_RGB888,
+	PIXFMT_YCrCbI,
+	PIXFMT_NV12,
+	PIXFMT_OSD_ATTR,
+};
+
+/**
+ * enum osd_h_exp_ratio
+ * @H_EXP_OFF: no expansion (1/1)
+ * @H_EXP_9_OVER_8: 9/8 expansion ratio
+ * @H_EXP_3_OVER_2: 3/2 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available horizontal expansion ratios.
+ */
+enum osd_h_exp_ratio {
+	H_EXP_OFF,
+	H_EXP_9_OVER_8,
+	H_EXP_3_OVER_2,
+};
+
+/**
+ * enum osd_v_exp_ratio
+ * @V_EXP_OFF: no expansion (1/1)
+ * @V_EXP_6_OVER_5: 6/5 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available vertical expansion ratios.
+ */
+enum osd_v_exp_ratio {
+	V_EXP_OFF,
+	V_EXP_6_OVER_5,
+};
+
+/**
+ * enum osd_zoom_factor
+ * @ZOOM_X1: no zoom (x1)
+ * @ZOOM_X2: x2 zoom
+ * @ZOOM_X4: x4 zoom
+ *
+ * Description:
+ * An enumeration of the available zoom factors.
+ */
+enum osd_zoom_factor {
+	ZOOM_X1,
+	ZOOM_X2,
+	ZOOM_X4,
+};
+
+/**
+ * enum osd_clut
+ * @ROM_CLUT: ROM CLUT
+ * @RAM_CLUT: RAM CLUT
+ *
+ * Description:
+ * An enumeration of the available Color Lookup Tables (CLUTs).
+ */
+enum osd_clut {
+	ROM_CLUT,
+	RAM_CLUT,
+};
+
+/**
+ * enum osd_rom_clut
+ * @ROM_CLUT0: Macintosh CLUT
+ * @ROM_CLUT1: CLUT from DM270 and prior devices
+ *
+ * Description:
+ * An enumeration of the ROM Color Lookup Table (CLUT) options.
+ */
+enum osd_rom_clut {
+	ROM_CLUT0,
+	ROM_CLUT1,
+};
+
+/**
+ * enum osd_blending_factor
+ * @OSD_0_VID_8: OSD pixels are fully transparent
+ * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
+ * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
+ * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
+ * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
+ * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
+ * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
+ * @OSD_8_VID_0: OSD pixels are fully opaque
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blending factor options.
+ */
+enum osd_blending_factor {
+	OSD_0_VID_8,
+	OSD_1_VID_7,
+	OSD_2_VID_6,
+	OSD_3_VID_5,
+	OSD_4_VID_4,
+	OSD_5_VID_3,
+	OSD_6_VID_2,
+	OSD_8_VID_0,
+};
+
+/**
+ * enum osd_blink_interval
+ * @BLINK_X1: blink interval is 1 vertical refresh cycle
+ * @BLINK_X2: blink interval is 2 vertical refresh cycles
+ * @BLINK_X3: blink interval is 3 vertical refresh cycles
+ * @BLINK_X4: blink interval is 4 vertical refresh cycles
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blinking interval options.
+ */
+enum osd_blink_interval {
+	BLINK_X1,
+	BLINK_X2,
+	BLINK_X3,
+	BLINK_X4,
+};
+
+/**
+ * enum osd_cursor_h_width
+ * @H_WIDTH_1: horizontal line width is 1 pixel
+ * @H_WIDTH_4: horizontal line width is 4 pixels
+ * @H_WIDTH_8: horizontal line width is 8 pixels
+ * @H_WIDTH_12: horizontal line width is 12 pixels
+ * @H_WIDTH_16: horizontal line width is 16 pixels
+ * @H_WIDTH_20: horizontal line width is 20 pixels
+ * @H_WIDTH_24: horizontal line width is 24 pixels
+ * @H_WIDTH_28: horizontal line width is 28 pixels
+ */
+enum osd_cursor_h_width {
+	H_WIDTH_1,
+	H_WIDTH_4,
+	H_WIDTH_8,
+	H_WIDTH_12,
+	H_WIDTH_16,
+	H_WIDTH_20,
+	H_WIDTH_24,
+	H_WIDTH_28,
+};
+
+/**
+ * enum davinci_cursor_v_width
+ * @V_WIDTH_1: vertical line width is 1 line
+ * @V_WIDTH_2: vertical line width is 2 lines
+ * @V_WIDTH_4: vertical line width is 4 lines
+ * @V_WIDTH_6: vertical line width is 6 lines
+ * @V_WIDTH_8: vertical line width is 8 lines
+ * @V_WIDTH_10: vertical line width is 10 lines
+ * @V_WIDTH_12: vertical line width is 12 lines
+ * @V_WIDTH_14: vertical line width is 14 lines
+ */
+enum osd_cursor_v_width {
+	V_WIDTH_1,
+	V_WIDTH_2,
+	V_WIDTH_4,
+	V_WIDTH_6,
+	V_WIDTH_8,
+	V_WIDTH_10,
+	V_WIDTH_12,
+	V_WIDTH_14,
+};
+
+/**
+ * struct osd_cursor_config
+ * @xsize: horizontal size in pixels
+ * @ysize: vertical size in lines
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ * @h_width: horizontal line width
+ * @v_width: vertical line width
+ * @clut: the CLUT selector (ROM or RAM) for the cursor color
+ * @clut_index: an index into the CLUT for the cursor color
+ *
+ * Description:
+ * A structure describing the configuration parameters of the hardware
+ * rectangular cursor.
+ */
+struct osd_cursor_config {
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+	enum osd_cursor_h_width h_width;
+	enum osd_cursor_v_width v_width;
+	enum osd_clut clut;
+	unsigned char clut_index;
+};
+
+/**
+ * struct osd_layer_config
+ * @pixfmt: pixel format
+ * @line_length: offset in bytes between start of each line in memory
+ * @xsize: number of horizontal pixels displayed per line
+ * @ysize: number of lines displayed
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ *
+ * Description:
+ * A structure describing the configuration parameters of an On-Screen Display
+ * (OSD) or video layer related to how the image is stored in memory.
+ * @line_length must be a multiple of the cache line size (32 bytes).
+ */
+struct osd_layer_config {
+	enum osd_pix_format pixfmt;
+	unsigned line_length;
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+};
+
+/* parameters that apply on a per-window (OSD or video) basis */
+struct osd_window_state {
+	int is_allocated;
+	int is_enabled;
+	unsigned long fb_base_phys;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	struct osd_layer_config lconfig;
+};
+
+/* parameters that apply on a per-OSD-window basis */
+struct osd_osdwin_state {
+	enum osd_clut clut;
+	enum osd_blending_factor blend;
+	int colorkey_blending;
+	unsigned colorkey;
+	int rec601_attenuation;
+	/* index is pixel value */
+	unsigned char palette_map[16];
+};
+
+/* hardware rectangular cursor parameters */
+struct osd_cursor_state {
+	int is_enabled;
+	struct osd_cursor_config config;
+};
+
+struct osd_state;
+
+struct vpbe_osd_ops {
+	int (*initialize)(struct osd_state *sd);
+	int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
+	void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin);
+	void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig);
+	void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig);
+	void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst);
+	void (*set_left_margin)(struct osd_state *sd, u32 val);
+	void (*set_top_margin)(struct osd_state *sd, u32 val);
+	void (*set_interpolation_filter)(struct osd_state *sd, int filter);
+	int (*set_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio h_exp,
+					enum osd_v_exp_ratio v_exp);
+	void (*get_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio *h_exp,
+					enum osd_v_exp_ratio *v_exp);
+	void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
+				enum osd_zoom_factor h_zoom,
+				enum osd_zoom_factor v_zoom);
+};
+
+struct osd_state {
+	enum vpbe_version vpbe_type;
+	spinlock_t lock;
+	struct device *dev;
+	dma_addr_t osd_base_phys;
+	unsigned long osd_base;
+	unsigned long osd_size;
+	/* 1-->the isr will toggle the VID0 ping-pong buffer */
+	int pingpong;
+	int interpolation_filter;
+	int field_inversion;
+	enum osd_h_exp_ratio osd_h_exp;
+	enum osd_v_exp_ratio osd_v_exp;
+	enum osd_h_exp_ratio vid_h_exp;
+	enum osd_v_exp_ratio vid_v_exp;
+	enum osd_clut backg_clut;
+	unsigned backg_clut_index;
+	enum osd_rom_clut rom_clut;
+	int is_blinking;
+	/* attribute window blinking enabled */
+	enum osd_blink_interval blink;
+	/* YCbCrI or YCrCbI */
+	enum osd_pix_format yc_pixfmt;
+	/* columns are Y, Cb, Cr */
+	unsigned char clut_ram[256][3];
+	struct osd_cursor_state cursor;
+	/* OSD0, VID0, OSD1, VID1 */
+	struct osd_window_state win[4];
+	/* OSD0, OSD1 */
+	struct osd_osdwin_state osdwin[2];
+	/* OSD device Operations */
+	struct vpbe_osd_ops ops;
+};
+
+struct osd_platform_data {
+	enum vpbe_version vpbe_type;
+	int  field_inv_wa_enable;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
new file mode 100644
index 0000000..727f551
--- /dev/null
+++ b/include/media/davinci/vpbe_types.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_TYPES_H
+#define _VPBE_TYPES_H
+
+enum vpbe_version {
+	VPBE_VERSION_1 = 1,
+	VPBE_VERSION_2,
+	VPBE_VERSION_3,
+};
+
+/* vpbe_timing_type - Timing types used in vpbe device */
+enum vpbe_enc_timings_type {
+	VPBE_ENC_STD = 0x1,
+	VPBE_ENC_DV_PRESET = 0x2,
+	VPBE_ENC_CUSTOM_TIMINGS = 0x4,
+	/* Used when set timings through FB device interface */
+	VPBE_ENC_TIMINGS_INVALID = 0x8,
+};
+
+union vpbe_timings {
+	v4l2_std_id std_id;
+	unsigned int dv_preset;
+};
+
+/*
+ * struct vpbe_enc_mode_info
+ * @name: ptr to name string of the standard, "NTSC", "PAL" etc
+ * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
+ * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
+ * @xres: x or horizontal resolution of the display
+ * @yres: y or vertical resolution of the display
+ * @fps: frame per second
+ * @left_margin: left margin of the display
+ * @right_margin: right margin of the display
+ * @upper_margin: upper margin of the display
+ * @lower_margin: lower margin of the display
+ * @hsync_len: h-sync length
+ * @vsync_len: v-sync length
+ * @flags: bit field: bit usage is documented below
+ *
+ * Description:
+ *  Structure holding timing and resolution information of a standard.
+ * Used by vpbe_device to set required non-standard timing in the
+ * venc when lcd controller output is connected to a external encoder.
+ * A table of timings is maintained in vpbe device to set this in
+ * venc when external encoder is connected to lcd controller output.
+ * Encoder may provide a g_dv_timings() API to override these values
+ * as needed.
+ *
+ *  Notes
+ *  ------
+ *  if_type should be used only by encoder manager and encoder.
+ *  flags usage
+ *     b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
+ *     b1       - vsync polarity, 0 - negative, 1 - positive
+ *     b2       - field id polarity, 0 - negative, 1  - positive
+ */
+struct vpbe_enc_mode_info {
+	unsigned char *name;
+	enum vpbe_enc_timings_type timings_type;
+	union vpbe_timings timings;
+	unsigned int interlaced;
+	unsigned int xres;
+	unsigned int yres;
+	struct v4l2_fract aspect;
+	struct v4l2_fract fps;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int flags;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
new file mode 100644
index 0000000..426c205
--- /dev/null
+++ b/include/media/davinci/vpbe_venc.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_H
+#define _VPBE_VENC_H
+
+#include <media/v4l2-subdev.h>
+#include <media/davinci/vpbe_types.h>
+
+#define VPBE_VENC_SUBDEV_NAME "vpbe-venc"
+
+/* venc events */
+#define VENC_END_OF_FRAME	BIT(0)
+#define VENC_FIRST_FIELD	BIT(1)
+#define VENC_SECOND_FIELD	BIT(2)
+
+struct venc_platform_data {
+	enum vpbe_version venc_type;
+	int (*setup_clock)(enum vpbe_enc_timings_type type,
+			   unsigned int mode);
+	/* Number of LCD outputs supported */
+	int num_lcd_outputs;
+};
+
+enum venc_ioctls {
+	VENC_GET_FLD = 1,
+};
+
+/* exported functions */
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name);
+#endif
diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
new file mode 100644
index 0000000..7611963
--- /dev/null
+++ b/include/media/mmp-camera.h
@@ -0,0 +1,9 @@
+/*
+ * Information for the Marvell Armada MMP camera
+ */
+
+struct mmp_camera_platform_data {
+	struct platform_device *i2c_device;
+	int sensor_power_gpio;
+	int sensor_reset_gpio;
+};
diff --git a/include/media/ov7670.h b/include/media/ov7670.h
new file mode 100644
index 0000000..b133bc1
--- /dev/null
+++ b/include/media/ov7670.h
@@ -0,0 +1,20 @@
+/*
+ * A V4L2 driver for OmniVision OV7670 cameras.
+ *
+ * Copyright 2010 One Laptop Per Child
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#ifndef __OV7670_H
+#define __OV7670_H
+
+struct ov7670_config {
+	int min_width;			/* Filter out smaller sizes */
+	int min_height;			/* Filter out smaller sizes */
+	int clock_speed;		/* External clock speed (MHz) */
+	bool use_smbus;			/* Use smbus I/O instead of I2C */
+};
+
+#endif
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 60536c7..b1f19b7 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -117,7 +117,7 @@ struct rc_dev {
 	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
 	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
 	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
-	int				(*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+	int				(*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
 	void				(*s_idle)(struct rc_dev *dev, bool enable);
 	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
 	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 4e1409e..17c9759 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -18,12 +18,13 @@
 #define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
 #define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
 #define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
+#define RC_TYPE_MCE_KBD	(1  << 29)	/* RC6-ish MCE keyboard/mouse */
 #define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
 #define RC_TYPE_OTHER	(1u << 31)
 
 #define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC  | RC_TYPE_RC6  | \
 		     RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
-		     RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
+		     RC_TYPE_RC5_SZ | RC_TYPE_MCE_KBD | RC_TYPE_OTHER)
 
 struct rc_map_table {
 	u32	scancode;
diff --git a/include/media/sh_mobile_ceu.h b/include/media/sh_mobile_ceu.h
index 80346a6..48413b4 100644
--- a/include/media/sh_mobile_ceu.h
+++ b/include/media/sh_mobile_ceu.h
@@ -7,10 +7,18 @@
 #define SH_CEU_FLAG_VSYNC_LOW		(1 << 3) /* default High if possible */
 
 struct device;
+struct resource;
+
+struct sh_mobile_ceu_companion {
+	u32		num_resources;
+	struct resource	*resource;
+	int		id;
+	void		*platform_data;
+};
 
 struct sh_mobile_ceu_info {
 	unsigned long flags;
-	struct device *csi2_dev;
+	struct sh_mobile_ceu_companion *csi2;
 };
 
 #endif /* __ASM_SH_MOBILE_CEU_H__ */
diff --git a/include/media/sh_mobile_csi2.h b/include/media/sh_mobile_csi2.h
index 4d26151..c586c4f 100644
--- a/include/media/sh_mobile_csi2.h
+++ b/include/media/sh_mobile_csi2.h
@@ -11,6 +11,8 @@
 #ifndef SH_MIPI_CSI
 #define SH_MIPI_CSI
 
+#include <linux/list.h>
+
 enum sh_csi2_phy {
 	SH_CSI2_PHY_MAIN,
 	SH_CSI2_PHY_SUB,
@@ -33,14 +35,14 @@ struct sh_csi2_client_config {
 	struct platform_device *pdev;	/* client platform device */
 };
 
+struct v4l2_device;
+
 struct sh_csi2_pdata {
 	enum sh_csi2_type type;
 	unsigned int flags;
 	struct sh_csi2_client_config *clients;
 	int num_clients;
+	struct v4l2_device *v4l2_dev;
 };
 
-struct device;
-struct v4l2_device;
-
 #endif
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 238bd33..7582952 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -20,14 +20,15 @@
 #include <media/videobuf2-core.h>
 #include <media/v4l2-device.h>
 
-extern struct bus_type soc_camera_bus_type;
-
 struct file;
+struct soc_camera_link;
 
 struct soc_camera_device {
-	struct list_head list;
-	struct device dev;
+	struct list_head list;		/* list of all registered devices */
+	struct soc_camera_link *link;
 	struct device *pdev;		/* Platform device */
+	struct device *parent;		/* Camera host device */
+	struct device *control;		/* E.g., the i2c client */
 	s32 user_width;
 	s32 user_height;
 	u32 bytesperline;		/* for padding, zero if unused */
@@ -66,8 +67,6 @@ struct soc_camera_host_ops {
 	struct module *owner;
 	int (*add)(struct soc_camera_device *);
 	void (*remove)(struct soc_camera_device *);
-	int (*suspend)(struct soc_camera_device *, pm_message_t);
-	int (*resume)(struct soc_camera_device *);
 	/*
 	 * .get_formats() is called for each client device format, but
 	 * .put_formats() is only called once. Further, if any of the calls to
@@ -109,12 +108,6 @@ struct soc_camera_host_ops {
 #define SOCAM_SENSOR_INVERT_HSYNC	(1 << 2)
 #define SOCAM_SENSOR_INVERT_VSYNC	(1 << 3)
 #define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
-#define SOCAM_MIPI_1LANE		(1 << 5)
-#define SOCAM_MIPI_2LANE		(1 << 6)
-#define SOCAM_MIPI_3LANE		(1 << 7)
-#define SOCAM_MIPI_4LANE		(1 << 8)
-#define SOCAM_MIPI	(SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
-			SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
 
 struct i2c_board_info;
 struct regulator_bulk_data;
@@ -134,11 +127,11 @@ struct soc_camera_link {
 	int num_regulators;
 
 	/*
-	 * For non-I2C devices platform platform has to provide methods to
-	 * add a device to the system and to remove
+	 * For non-I2C devices platform has to provide methods to add a device
+	 * to the system and to remove it
 	 */
-	int (*add_device)(struct soc_camera_link *, struct device *);
-	void (*del_device)(struct soc_camera_link *);
+	int (*add_device)(struct soc_camera_device *);
+	void (*del_device)(struct soc_camera_device *);
 	/* Optional callbacks to power on or off and reset the sensor */
 	int (*power)(struct device *, int);
 	int (*reset)(struct device *);
@@ -152,12 +145,6 @@ struct soc_camera_link {
 	void (*free_bus)(struct soc_camera_link *);
 };
 
-static inline struct soc_camera_device *to_soc_camera_dev(
-	const struct device *dev)
-{
-	return container_of(dev, struct soc_camera_device, dev);
-}
-
 static inline struct soc_camera_host *to_soc_camera_host(
 	const struct device *dev)
 {
@@ -169,13 +156,13 @@ static inline struct soc_camera_host *to_soc_camera_host(
 static inline struct soc_camera_link *to_soc_camera_link(
 	const struct soc_camera_device *icd)
 {
-	return icd->dev.platform_data;
+	return icd->link;
 }
 
 static inline struct device *to_soc_camera_control(
 	const struct soc_camera_device *icd)
 {
-	return dev_get_drvdata(&icd->dev);
+	return icd->control;
 }
 
 static inline struct v4l2_subdev *soc_camera_to_subdev(
@@ -207,11 +194,8 @@ struct soc_camera_format_xlate {
 };
 
 struct soc_camera_ops {
-	int (*suspend)(struct soc_camera_device *, pm_message_t state);
-	int (*resume)(struct soc_camera_device *);
 	unsigned long (*query_bus_param)(struct soc_camera_device *);
 	int (*set_bus_param)(struct soc_camera_device *, unsigned long);
-	int (*enum_input)(struct soc_camera_device *, struct v4l2_input *);
 	const struct v4l2_queryctrl *controls;
 	int num_controls;
 };
@@ -270,6 +254,12 @@ static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
 #define SOCAM_PCLK_SAMPLE_FALLING	(1 << 13)
 #define SOCAM_DATA_ACTIVE_HIGH		(1 << 14)
 #define SOCAM_DATA_ACTIVE_LOW		(1 << 15)
+#define SOCAM_MIPI_1LANE		(1 << 16)
+#define SOCAM_MIPI_2LANE		(1 << 17)
+#define SOCAM_MIPI_3LANE		(1 << 18)
+#define SOCAM_MIPI_4LANE		(1 << 19)
+#define SOCAM_MIPI	(SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
+			SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
 
 #define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
 			      SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
index 6d7a4fd..74f0fa1 100644
--- a/include/media/soc_camera_platform.h
+++ b/include/media/soc_camera_platform.h
@@ -21,7 +21,7 @@ struct soc_camera_platform_info {
 	unsigned long format_depth;
 	struct v4l2_mbus_framefmt format;
 	unsigned long bus_param;
-	struct device *dev;
+	struct soc_camera_device *icd;
 	int (*set_capture)(struct soc_camera_platform_info *info, int enable);
 };
 
@@ -30,8 +30,7 @@ static inline void soc_camera_platform_release(struct platform_device **pdev)
 	*pdev = NULL;
 }
 
-static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
-					  struct device *dev,
+static inline int soc_camera_platform_add(struct soc_camera_device *icd,
 					  struct platform_device **pdev,
 					  struct soc_camera_link *plink,
 					  void (*release)(struct device *dev),
@@ -40,7 +39,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	struct soc_camera_platform_info *info = plink->priv;
 	int ret;
 
-	if (icl != plink)
+	if (icd->link != plink)
 		return -ENODEV;
 
 	if (*pdev)
@@ -50,7 +49,7 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	if (!*pdev)
 		return -ENOMEM;
 
-	info->dev = dev;
+	info->icd = icd;
 
 	(*pdev)->dev.platform_data = info;
 	(*pdev)->dev.release = release;
@@ -59,17 +58,17 @@ static inline int soc_camera_platform_add(const struct soc_camera_link *icl,
 	if (ret < 0) {
 		platform_device_put(*pdev);
 		*pdev = NULL;
-		info->dev = NULL;
+		info->icd = NULL;
 	}
 
 	return ret;
 }
 
-static inline void soc_camera_platform_del(const struct soc_camera_link *icl,
+static inline void soc_camera_platform_del(const struct soc_camera_device *icd,
 					   struct platform_device *pdev,
 					   const struct soc_camera_link *plink)
 {
-	if (icl != plink || !pdev)
+	if (icd->link != plink || !pdev)
 		return;
 
 	platform_device_unregister(pdev);
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
index a59a848..a40a6a3 100644
--- a/include/media/timb_radio.h
+++ b/include/media/timb_radio.h
@@ -23,13 +23,8 @@
 
 struct timb_radio_platform_data {
 	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
-	struct {
-		struct i2c_board_info *info;
-	} tuner;
-	struct {
-		const char *module_name;
-		struct i2c_board_info *info;
-	} dsp;
+	struct i2c_board_info *tuner;
+	struct i2c_board_info *dsp;
 };
 
 #endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 963e334..89c290b 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -127,6 +127,8 @@
 #define TUNER_PHILIPS_FMD1216MEX_MK3	78
 #define TUNER_PHILIPS_FM1216MK5		79
 #define TUNER_PHILIPS_FQ1216LME_MK3	80	/* Active loopthrough, no FM */
+#define TUNER_XC4000			81	/* Xceive Silicon Tuner */
+
 #define TUNER_PARTSNIC_PTI_5NF05	81
 #define TUNER_PHILIPS_CU1216L           82
 #define TUNER_NXP_TDA18271		83
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index b3edb67..63fd9d3 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -76,6 +76,7 @@ enum {
 	V4L2_IDENT_OV6650 = 258,
 	V4L2_IDENT_OV2640 = 259,
 	V4L2_IDENT_OV9740 = 260,
+	V4L2_IDENT_OV5642 = 261,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
@@ -185,8 +186,9 @@ enum {
 	/* module wm8775: just ident 8775 */
 	V4L2_IDENT_WM8775 = 8775,
 
-	/* module cafe_ccic, just ident 8801 */
+	/* Marvell controllers starting at 8801 */
 	V4L2_IDENT_CAFE = 8801,
+	V4L2_IDENT_ARMADA610 = 8802,
 
 	/* AKM AK8813/AK8814 */
 	V4L2_IDENT_AK8813 = 8813,
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 97d0638..13fe4d7 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -27,9 +27,12 @@
 
 /* forward references */
 struct v4l2_ctrl_handler;
+struct v4l2_ctrl_helper;
 struct v4l2_ctrl;
 struct video_device;
 struct v4l2_subdev;
+struct v4l2_subscribed_event;
+struct v4l2_fh;
 
 /** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
   * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
@@ -51,6 +54,7 @@ struct v4l2_ctrl_ops {
 
 /** struct v4l2_ctrl - The control structure.
   * @node:	The list node.
+  * @ev_subs:	The list of control event subscriptions.
   * @handler:	The handler that owns the control.
   * @cluster:	Point to start of cluster array.
   * @ncontrols:	Number of controls in cluster array.
@@ -65,6 +69,15 @@ struct v4l2_ctrl_ops {
   *		control's current value cannot be cached and needs to be
   *		retrieved through the g_volatile_ctrl op. Drivers can set
   *		this flag.
+  * @is_auto:   If set, then this control selects whether the other cluster
+  *		members are in 'automatic' mode or 'manual' mode. This is
+  *		used for autogain/gain type clusters. Drivers should never
+  *		set this flag directly.
+  * @manual_mode_value: If the is_auto flag is set, then this is the value
+  *		of the auto control that determines if that control is in
+  *		manual mode. So if the value of the auto control equals this
+  *		value, then the whole cluster is in manual mode. Drivers should
+  *		never set this flag directly.
   * @ops:	The control ops.
   * @id:	The control ID.
   * @name:	The control name.
@@ -97,6 +110,7 @@ struct v4l2_ctrl_ops {
 struct v4l2_ctrl {
 	/* Administrative fields */
 	struct list_head node;
+	struct list_head ev_subs;
 	struct v4l2_ctrl_handler *handler;
 	struct v4l2_ctrl **cluster;
 	unsigned ncontrols;
@@ -105,6 +119,8 @@ struct v4l2_ctrl {
 	unsigned int is_new:1;
 	unsigned int is_private:1;
 	unsigned int is_volatile:1;
+	unsigned int is_auto:1;
+	unsigned int manual_mode_value:8;
 
 	const struct v4l2_ctrl_ops *ops;
 	u32 id;
@@ -134,6 +150,7 @@ struct v4l2_ctrl {
   * @node:	List node for the sorted list.
   * @next:	Single-link list node for the hash.
   * @ctrl:	The actual control information.
+  * @helper:	Pointer to helper struct. Used internally in prepare_ext_ctrls().
   *
   * Each control handler has a list of these refs. The list_head is used to
   * keep a sorted-by-control-ID list of all controls, while the next pointer
@@ -143,6 +160,7 @@ struct v4l2_ctrl_ref {
 	struct list_head node;
 	struct v4l2_ctrl_ref *next;
 	struct v4l2_ctrl *ctrl;
+	struct v4l2_ctrl_helper *helper;
 };
 
 /** struct v4l2_ctrl_handler - The control handler keeps track of all the
@@ -363,6 +381,40 @@ int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
 void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
 
 
+/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to
+  * that cluster and set it up for autofoo/foo-type handling.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls:	The cluster control array of size @ncontrols. The first control
+  *		must be the 'auto' control (e.g. autogain, autoexposure, etc.)
+  * @manual_val: The value for the first control in the cluster that equals the
+  *		manual setting.
+  * @set_volatile: If true, then all controls except the first auto control will
+  *		have is_volatile set to true. If false, then is_volatile will not
+  *		be touched.
+  *
+  * Use for control groups where one control selects some automatic feature and
+  * the other controls are only active whenever the automatic feature is turned
+  * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs
+  * red and blue balance, etc.
+  *
+  * The behavior of such controls is as follows:
+  *
+  * When the autofoo control is set to automatic, then any manual controls
+  * are set to inactive and any reads will call g_volatile_ctrl (if the control
+  * was marked volatile).
+  *
+  * When the autofoo control is set to manual, then any manual controls will
+  * be marked active, and any reads will just return the current value without
+  * going through g_volatile_ctrl.
+  *
+  * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag
+  * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s)
+  * if autofoo is in auto mode.
+  */
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			u8 manual_val, bool set_volatile);
+
+
 /** v4l2_ctrl_find() - Find a control with the given ID.
   * @hdl:	The control handler.
   * @id:	The control ID to find.
@@ -379,9 +431,9 @@ struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
   * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
   * Does nothing if @ctrl == NULL.
   * This will usually be called from within the s_ctrl op.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
   *
-  * This function can be called regardless of whether the control handler
-  * is locked or not.
+  * This function assumes that the control handler is locked.
   */
 void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
 
@@ -391,11 +443,12 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
   *
   * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
   * Does nothing if @ctrl == NULL.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
   * This will usually be called when starting or stopping streaming in the
   * driver.
   *
-  * This function can be called regardless of whether the control handler
-  * is locked or not.
+  * This function assumes that the control handler is not locked and will
+  * take the lock itself.
   */
 void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
 
@@ -440,15 +493,22 @@ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
   */
 int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
 
+/* Internal helper functions that deal with control events. */
+void v4l2_ctrl_add_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
+void v4l2_ctrl_del_event(struct v4l2_ctrl *ctrl,
+		struct v4l2_subscribed_event *sev);
 
 /* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
 int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
 int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
 int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
-int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_control *ctrl);
 int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
 int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
-int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_ext_controls *c);
 
 /* Helpers for subdevices. If the associated ctrl_handler == NULL then they
    will all return -EINVAL. */
diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h
index 3b86177..5f14e88 100644
--- a/include/media/v4l2-event.h
+++ b/include/media/v4l2-event.h
@@ -29,39 +29,95 @@
 #include <linux/videodev2.h>
 #include <linux/wait.h>
 
+/*
+ * Overview:
+ *
+ * Events are subscribed per-filehandle. An event specification consists of a
+ * type and is optionally associated with an object identified through the
+ * 'id' field. So an event is uniquely identified by the (type, id) tuple.
+ *
+ * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event
+ * struct is added to that list, one for every subscribed event.
+ *
+ * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs.
+ * This array (ringbuffer, really) is used to store any events raised by the
+ * driver. The v4l2_kevent struct links into the 'available' list of the
+ * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first.
+ *
+ * Finally, if the event subscription is associated with a particular object
+ * such as a V4L2 control, then that object needs to know about that as well
+ * so that an event can be raised by that object. So the 'node' field can
+ * be used to link the v4l2_subscribed_event struct into a list of that
+ * object.
+ *
+ * So to summarize:
+ *
+ * struct v4l2_fh has two lists: one of the subscribed events, and one of the
+ * pending events.
+ *
+ * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of
+ * that particular type.
+ *
+ * If struct v4l2_subscribed_event is associated with a specific object, then
+ * that object will have an internal list of struct v4l2_subscribed_event so
+ * it knows who subscribed an event to that object.
+ */
+
 struct v4l2_fh;
+struct v4l2_subscribed_event;
 struct video_device;
 
+/** struct v4l2_kevent - Internal kernel event struct.
+  * @list:	List node for the v4l2_fh->available list.
+  * @sev:	Pointer to parent v4l2_subscribed_event.
+  * @event:	The event itself.
+  */
 struct v4l2_kevent {
 	struct list_head	list;
+	struct v4l2_subscribed_event *sev;
 	struct v4l2_event	event;
 };
 
+/** struct v4l2_subscribed_event - Internal struct representing a subscribed event.
+  * @list:	List node for the v4l2_fh->subscribed list.
+  * @type:	Event type.
+  * @id:	Associated object ID (e.g. control ID). 0 if there isn't any.
+  * @flags:	Copy of v4l2_event_subscription->flags.
+  * @fh:	Filehandle that subscribed to this event.
+  * @node:	List node that hooks into the object's event list (if there is one).
+  * @replace:	Optional callback that can replace event 'old' with event 'new'.
+  * @merge:	Optional callback that can merge event 'old' into event 'new'.
+  * @elems:	The number of elements in the events array.
+  * @first:	The index of the events containing the oldest available event.
+  * @in_use:	The number of queued events.
+  * @events:	An array of @elems events.
+  */
 struct v4l2_subscribed_event {
 	struct list_head	list;
 	u32			type;
+	u32			id;
+	u32			flags;
+	struct v4l2_fh		*fh;
+	struct list_head	node;
+	void			(*replace)(struct v4l2_event *old,
+					   const struct v4l2_event *new);
+	void			(*merge)(const struct v4l2_event *old,
+					 struct v4l2_event *new);
+	unsigned		elems;
+	unsigned		first;
+	unsigned		in_use;
+	struct v4l2_kevent	events[];
 };
 
-struct v4l2_events {
-	wait_queue_head_t	wait;
-	struct list_head	subscribed; /* Subscribed events */
-	struct list_head	free; /* Events ready for use */
-	struct list_head	available; /* Dequeueable event */
-	unsigned int		navailable;
-	unsigned int		nallocated; /* Number of allocated events */
-	u32			sequence;
-};
-
-int v4l2_event_init(struct v4l2_fh *fh);
-int v4l2_event_alloc(struct v4l2_fh *fh, unsigned int n);
-void v4l2_event_free(struct v4l2_fh *fh);
 int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
 		       int nonblocking);
 void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev);
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev);
 int v4l2_event_pending(struct v4l2_fh *fh);
 int v4l2_event_subscribe(struct v4l2_fh *fh,
-			 struct v4l2_event_subscription *sub);
+			 struct v4l2_event_subscription *sub, unsigned elems);
 int v4l2_event_unsubscribe(struct v4l2_fh *fh,
 			   struct v4l2_event_subscription *sub);
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh);
 
 #endif /* V4L2_EVENT_H */
diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h
index 0206aa5..52513c2 100644
--- a/include/media/v4l2-fh.h
+++ b/include/media/v4l2-fh.h
@@ -29,13 +29,20 @@
 #include <linux/list.h>
 
 struct video_device;
-struct v4l2_events;
+struct v4l2_ctrl_handler;
 
 struct v4l2_fh {
 	struct list_head	list;
 	struct video_device	*vdev;
-	struct v4l2_events      *events; /* events, pending and subscribed */
+	struct v4l2_ctrl_handler *ctrl_handler;
 	enum v4l2_priority	prio;
+
+	/* Events */
+	wait_queue_head_t	wait;
+	struct list_head	subscribed; /* Subscribed events */
+	struct list_head	available; /* Dequeueable event */
+	unsigned int		navailable;
+	u32			sequence;
 };
 
 /*
@@ -44,7 +51,7 @@ struct v4l2_fh {
  * from driver's v4l2_file_operations->open() handler if the driver
  * uses v4l2_fh.
  */
-int v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
 /*
  * Add the fh to the list of file handles on a video_device. The file
  * handle must be initialised first.
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 971c7fa..6114007 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -13,6 +13,69 @@
 
 #include <linux/v4l2-mediabus.h>
 
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER			(1 << 0)
+#define V4L2_MBUS_SLAVE				(1 << 1)
+/* Which signal polarities it supports */
+/* Note: in BT.656 mode HSYNC and VSYNC are unused */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH		(1 << 2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW		(1 << 3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW		(1 << 5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING		(1 << 6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING		(1 << 7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		(1 << 8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		(1 << 9)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE			(1 << 0)
+#define V4L2_MBUS_CSI2_2_LANE			(1 << 1)
+#define V4L2_MBUS_CSI2_3_LANE			(1 << 2)
+#define V4L2_MBUS_CSI2_4_LANE			(1 << 3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0		(1 << 4)
+#define V4L2_MBUS_CSI2_CHANNEL_1		(1 << 5)
+#define V4L2_MBUS_CSI2_CHANNEL_2		(1 << 6)
+#define V4L2_MBUS_CSI2_CHANNEL_3		(1 << 7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		(1 << 8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	(1 << 9)
+
+#define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
+ *			also be used for BT.1120
+ * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+	V4L2_MBUS_PARALLEL,
+	V4L2_MBUS_BT656,
+	V4L2_MBUS_CSI2,
+};
+
+/**
+ * v4l2_mbus_config - media bus configuration
+ * @type:	in: interface type
+ * @flags:	in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+	enum v4l2_mbus_type type;
+	unsigned int flags;
+};
+
 static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
 				const struct v4l2_mbus_framefmt *mbus_fmt)
 {
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 2884e3e..257da1a 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -229,6 +229,12 @@ struct v4l2_subdev_audio_ops {
    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 	video input devices.
 
+   g_std_output: get current standard for video OUTPUT devices. This is ignored
+	by video input devices.
+
+   g_tvnorms_output: get v4l2_std_id with all standards supported by video
+	OUTPUT device. This is ignored by video input devices.
+
    s_crystal_freq: sets the frequency of the crystal used to generate the
 	clocks in Hz. An extra flags field allows device specific configuration
 	regarding clock frequency dividers, etc. If not used, then set flags
@@ -243,6 +249,8 @@ struct v4l2_subdev_audio_ops {
    s_dv_preset: set dv (Digital Video) preset in the sub device. Similar to
 	s_std()
 
+   g_dv_preset: get current dv (Digital Video) preset in the sub device.
+
    query_dv_preset: query dv preset in the sub device. This is similar to
 	querystd()
 
@@ -259,12 +267,20 @@ struct v4l2_subdev_audio_ops {
    try_mbus_fmt: try to set a pixel format on a video data source
 
    s_mbus_fmt: set a pixel format on a video data source
+
+   g_mbus_config: get supported mediabus configurations
+
+   s_mbus_config: set a certain mediabus configuration. This operation is added
+	for compatibility with soc-camera drivers and should not be used by new
+	software.
  */
 struct v4l2_subdev_video_ops {
 	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
 	int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
 	int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
+	int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 	int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
 	int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
 	int (*s_stream)(struct v4l2_subdev *sd, int enable);
 	int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
@@ -282,6 +298,8 @@ struct v4l2_subdev_video_ops {
 			struct v4l2_dv_enum_preset *preset);
 	int (*s_dv_preset)(struct v4l2_subdev *sd,
 			struct v4l2_dv_preset *preset);
+	int (*g_dv_preset)(struct v4l2_subdev *sd,
+			struct v4l2_dv_preset *preset);
 	int (*query_dv_preset)(struct v4l2_subdev *sd,
 			struct v4l2_dv_preset *preset);
 	int (*s_dv_timings)(struct v4l2_subdev *sd,
@@ -298,6 +316,10 @@ struct v4l2_subdev_video_ops {
 			    struct v4l2_mbus_framefmt *fmt);
 	int (*s_mbus_fmt)(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *fmt);
+	int (*g_mbus_config)(struct v4l2_subdev *sd,
+			     struct v4l2_mbus_config *cfg);
+	int (*s_mbus_config)(struct v4l2_subdev *sd,
+			     const struct v4l2_mbus_config *cfg);
 };
 
 /*
@@ -513,8 +535,6 @@ struct v4l2_subdev {
 	void *host_priv;
 	/* subdev device node */
 	struct video_device devnode;
-	/* number of events to be allocated on open */
-	unsigned int nevents;
 };
 
 #define media_entity_to_v4l2_subdev(ent) \