V4L/DVB (4270): Add tda9887-specific tuner configuration

Many tda9887 settings depend on the chosen tuner. Expand the tuner parameters
to include these tda9887 settings.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 55 insertions, 0 deletions

diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index ad9c171..3c43b95f4 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -20,6 +20,7 @@ struct tuner_range {
 
 struct tuner_params {
 	enum param_type type;
+
 	/* Many Philips based tuners have a comment like this in their
 	 * datasheet:
 	 *
@@ -39,6 +40,60 @@ struct tuner_params {
 	 * static unless the control byte was sent first.
 	 */
 	unsigned int cb_first_if_lower_freq:1;
+	/* Set to 1 if this tuner uses a tda9887 */
+	unsigned int has_tda9887:1;
+	/* Many Philips tuners use tda9887 PORT1 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT1 to 1 to
+	   get proper FM reception. */
+	unsigned int port1_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 PORT2 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT2 to 1 to
+	   get proper FM reception. */
+	unsigned int port2_fm_high_sensitivity:1;
+	/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
+	   use Intercarrier mode. If this setting is 1, then the tuner
+	   needs to be set to intercarrier mode. */
+	unsigned int intercarrier_mode:1;
+	/* This setting sets the default value for PORT1.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B6 bit. */
+	unsigned int port1_active:1;
+	/* This setting sets the default value for PORT2.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B7 bit. */
+	unsigned int port2_active:1;
+	/* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port1_invert_for_secam_lc:1;
+	/* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port2_invert_for_secam_lc:1;
+	/* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
+	unsigned int port1_set_for_fm_mono:1;
+	/* Default tda9887 TOP value in dB for the low band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_low:5;
+	/* Default tda9887 TOP value in dB for the mid band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_mid:5;
+	/* Default tda9887 TOP value in dB for the high band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_high:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_low:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_mid:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_high:5;
+
 
 	unsigned int count;
 	struct tuner_range *ranges;