summaryrefslogtreecommitdiffstats
path: root/include/media
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@osg.samsung.com>2015-10-05 10:24:59 -0300
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>2015-10-05 10:36:16 -0300
commit65fc64090ed3dc750d40474b07a6f8ad734440cc (patch)
tree9895c0b734ca872bac451ea1fb30ec4616739c88 /include/media
parent62e93f090b0903def1d7455c311c50b9e6f38ef2 (diff)
downloadop-kernel-dev-65fc64090ed3dc750d40474b07a6f8ad734440cc.zip
op-kernel-dev-65fc64090ed3dc750d40474b07a6f8ad734440cc.tar.gz
[media] DocBook: convert struct tuner_parms to doc-nano format
The struct tuner_params is almost fully documented, but using a non-standard way. Convert it to doc-nano format, and add descriptions for the parameters that aren't documented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'include/media')
-rw-r--r--include/media/tuner-types.h156
1 files changed, 92 insertions, 64 deletions
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index ab03c53..011b4a2 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -19,91 +19,119 @@ struct tuner_range {
unsigned char cb;
};
+/**
+ * struct tuner_params - Parameters to be used to setup the tuner. Those
+ * are used by drivers/media/tuners/tuner-types.c in
+ * order to specify the tuner properties. Most of
+ * the parameters are for tuners based on tda9887 IF-PLL
+ * multi-standard analog TV/Radio demodulator, with is
+ * very common on legacy analog tuners.
+ *
+ * @type: Type of the tuner parameters, as defined at
+ * enum param_type. If the tuner supports multiple
+ * standards, an array should be used, with one
+ * row per different standard.
+ * @cb_first_if_lower_freq: Many Philips-based tuners have a comment in
+ * their datasheet like
+ * "For channel selection involving band
+ * switching, and to ensure smooth tuning to the
+ * desired channel without causing unnecessary
+ * charge pump action, it is recommended to
+ * consider the difference between wanted channel
+ * frequency and the current channel frequency.
+ * Unnecessary charge pump action will result
+ * in very low tuning voltage which may drive the
+ * oscillator to extreme conditions".
+ * Set cb_first_if_lower_freq to 1, if this check
+ * is required for this tuner. I tested this for
+ * PAL by first setting the TV frequency to
+ * 203 MHz and then switching to 96.6 MHz FM
+ * radio. The result was static unless the
+ * control byte was sent first.
+ * @has_tda9887: Set to 1 if this tuner uses a tda9887
+ * @port1_fm_high_sensitivity: Many Philips tuners use tda9887 PORT1 to select
+ * the FM radio sensitivity. If this setting is 1,
+ * then set PORT1 to 1 to get proper FM reception.
+ * @port2_fm_high_sensitivity: Some Philips tuners use tda9887 PORT2 to select
+ * the FM radio sensitivity. If this setting is 1,
+ * then set PORT2 to 1 to get proper FM reception.
+ * @fm_gain_normal: Some Philips tuners use tda9887 cGainNormal to
+ * select the FM radio sensitivity. If this
+ * setting is 1, e register will use cGainNormal
+ * instead of cGainLow.
+ * @intercarrier_mode: Most tuners with a tda9887 use QSS mode.
+ * Some (cheaper) tuners use Intercarrier mode.
+ * If this setting is 1, then the tuner needs to
+ * be set to intercarrier mode.
+ * @port1_active: This setting sets the default value for PORT1.
+ * 0 means inactive, 1 means active. Note: the
+ * actual bit value written to the tda9887 is
+ * inverted. So a 0 here means a 1 in the B6 bit.
+ * @port2_active: This setting sets the default value for PORT2.
+ * 0 means inactive, 1 means active. Note: the
+ * actual bit value written to the tda9887 is
+ * inverted. So a 0 here means a 1 in the B7 bit.
+ * @port1_invert_for_secam_lc: Sometimes PORT1 is inverted when the SECAM-L'
+ * standard is selected. Set this bit to 1 if this
+ * is needed.
+ * @port2_invert_for_secam_lc: Sometimes PORT2 is inverted when the SECAM-L'
+ * standard is selected. Set this bit to 1 if this
+ * is needed.
+ * @port1_set_for_fm_mono: Some cards require PORT1 to be 1 for mono Radio
+ * FM and 0 for stereo.
+ * @default_pll_gating_18: Select 18% (or according to datasheet 0%)
+ * L standard PLL gating, vs the driver default
+ * of 36%.
+ * @radio_if: IF to use in radio mode. Tuners with a
+ * separate radio IF filter seem to use 10.7,
+ * while those without use 33.3 for PAL/SECAM
+ * tuners and 41.3 for NTSC tuners.
+ * 0 = 10.7, 1 = 33.3, 2 = 41.3
+ * @default_top_low: Default tda9887 TOP value in dB for the low
+ * band. Default is 0. Range: -16:+15
+ * @default_top_mid: Default tda9887 TOP value in dB for the mid
+ * band. Default is 0. Range: -16:+15
+ * @default_top_high: Default tda9887 TOP value in dB for the high
+ * band. Default is 0. Range: -16:+15
+ * @default_top_secam_low: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the low band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_mid: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the mid band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_high: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the high band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @iffreq: Intermediate frequency (IF) used by the tuner
+ * on digital mode.
+ * @count: Size of the ranges array.
+ * @ranges: Array with the frequency ranges supported by
+ * the tuner.
+ */
struct tuner_params {
enum param_type type;
- /* Many Philips based tuners have a comment like this in their
- * datasheet:
- *
- * For channel selection involving band switching, and to ensure
- * smooth tuning to the desired channel without causing
- * unnecessary charge pump action, it is recommended to consider
- * the difference between wanted channel frequency and the
- * current channel frequency. Unnecessary charge pump action
- * will result in very low tuning voltage which may drive the
- * oscillator to extreme conditions.
- *
- * Set cb_first_if_lower_freq to 1, if this check is
- * required for this tuner.
- *
- * I tested this for PAL by first setting the TV frequency to
- * 203 MHz and then switching to 96.6 MHz FM radio. The result was
- * static unless the control byte was sent first.
- */
unsigned int cb_first_if_lower_freq:1;
- /* Set to 1 if this tuner uses a tda9887 */
unsigned int has_tda9887:1;
- /* Many Philips tuners use tda9887 PORT1 to select the FM radio
- sensitivity. If this setting is 1, then set PORT1 to 1 to
- get proper FM reception. */
unsigned int port1_fm_high_sensitivity:1;
- /* Some Philips tuners use tda9887 PORT2 to select the FM radio
- sensitivity. If this setting is 1, then set PORT2 to 1 to
- get proper FM reception. */
unsigned int port2_fm_high_sensitivity:1;
- /* Some Philips tuners use tda9887 cGainNormal to select the FM radio
- sensitivity. If this setting is 1, e register will use cGainNormal
- instead of cGainLow. */
unsigned int fm_gain_normal:1;
- /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
- use Intercarrier mode. If this setting is 1, then the tuner
- needs to be set to intercarrier mode. */
unsigned int intercarrier_mode:1;
- /* This setting sets the default value for PORT1.
- 0 means inactive, 1 means active. Note: the actual bit
- value written to the tda9887 is inverted. So a 0 here
- means a 1 in the B6 bit. */
unsigned int port1_active:1;
- /* This setting sets the default value for PORT2.
- 0 means inactive, 1 means active. Note: the actual bit
- value written to the tda9887 is inverted. So a 0 here
- means a 1 in the B7 bit. */
unsigned int port2_active:1;
- /* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
- Set this bit to 1 if this is needed. */
unsigned int port1_invert_for_secam_lc:1;
- /* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
- Set this bit to 1 if this is needed. */
unsigned int port2_invert_for_secam_lc:1;
- /* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
unsigned int port1_set_for_fm_mono:1;
- /* Select 18% (or according to datasheet 0%) L standard PLL gating,
- vs the driver default of 36%. */
unsigned int default_pll_gating_18:1;
- /* IF to use in radio mode. Tuners with a separate radio IF filter
- seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
- and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
unsigned int radio_if:2;
- /* Default tda9887 TOP value in dB for the low band. Default is 0.
- Range: -16:+15 */
signed int default_top_low:5;
- /* Default tda9887 TOP value in dB for the mid band. Default is 0.
- Range: -16:+15 */
signed int default_top_mid:5;
- /* Default tda9887 TOP value in dB for the high band. Default is 0.
- Range: -16:+15 */
signed int default_top_high:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_low:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_mid:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_high:5;
u16 iffreq;
OpenPOWER on IntegriCloud