Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/smsc911x.c

93 files changed, 148 insertions, 124 deletions

diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index 24d26ef..e82e3ee 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -136,7 +136,7 @@ struct clcd_board {
 	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
 
 	/*
-	 * Compulsary.  Decode fb->fb.var into regs->*.  In the case of
+	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
 	 * fixed timing, set regs->* to the register values required.
 	 */
 	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h
index f602270..2111481 100644
--- a/include/linux/amba/mmci.h
+++ b/include/linux/amba/mmci.h
@@ -30,15 +30,15 @@ struct dma_chan;
  * @cd_invert: true if the gpio_cd pin value is active low
  * @capabilities: the capabilities of the block as implemented in
  * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @dma_filter: function used to select an apropriate RX and TX
+ * @dma_filter: function used to select an appropriate RX and TX
  * DMA channel to be used for DMA, if and only if you're deploying the
  * generic DMA engine
  * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate RX channel. If
+ * filter in order to select an appropriate RX channel. If
  * there is a bidirectional RX+TX channel, then just specify
  * this and leave dma_tx_param set to NULL
  * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an apropriate TX channel. If this
+ * filter in order to select an appropriate TX channel. If this
  * is NULL the driver will attempt to use the RX channel as a
  * bidirectional channel
  */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 16a902f..32176cc 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1206,6 +1206,7 @@ struct blk_integrity {
 	struct kobject		kobj;
 };
 
+extern bool blk_integrity_is_initialized(struct gendisk *);
 extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
 extern void blk_integrity_unregister(struct gendisk *);
 extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
@@ -1262,6 +1263,7 @@ queue_max_integrity_segments(struct request_queue *q)
 #define queue_max_integrity_segments(a)		(0)
 #define blk_integrity_merge_rq(a, b, c)		(0)
 #define blk_integrity_merge_bio(a, b, c)	(0)
+#define blk_integrity_is_initialized(a)		(0)
 
 #endif /* CONFIG_BLK_DEV_INTEGRITY */
 
diff --git a/include/linux/can/error.h b/include/linux/can/error.h
index d4127fd..5958074 100644
--- a/include/linux/can/error.h
+++ b/include/linux/can/error.h
@@ -51,7 +51,7 @@
 #define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
 #define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
 #define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occured on transmission */
+#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
 
 /* error in CAN protocol (location) / data[3] */
 #define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h
index 3250de9..34542d3 100644
--- a/include/linux/can/netlink.h
+++ b/include/linux/can/netlink.h
@@ -17,7 +17,7 @@
 /*
  * CAN bit-timing parameters
  *
- * For futher information, please read chapter "8 BIT TIMING
+ * For further information, please read chapter "8 BIT TIMING
  * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
  * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
  */
diff --git a/include/linux/cdk.h b/include/linux/cdk.h
index 0908daf..80093a8 100644
--- a/include/linux/cdk.h
+++ b/include/linux/cdk.h
@@ -149,7 +149,7 @@ typedef struct cdkhdr {
 /*
  *	Define the memory mapping structure. This structure is pointed to by
  *	the memp field in the stlcdkhdr struct. As many as these structures
- *	as required are layed out in shared memory to define how the rest of
+ *	as required are laid out in shared memory to define how the rest of
  *	shared memory is divided up. There will be one for each port.
  */
 typedef struct cdkmem {
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index 7fff521..aa13392 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -67,12 +67,12 @@ struct ceph_auth_client {
 	bool negotiating;       /* true if negotiating protocol */
 	const char *name;       /* entity name */
 	u64 global_id;          /* our unique id in system */
-	const char *secret;     /* our secret key */
+	const struct ceph_crypto_key *key;     /* our secret key */
 	unsigned want_keys;     /* which services we want */
 };
 
 extern struct ceph_auth_client *ceph_auth_init(const char *name,
-					       const char *secret);
+					       const struct ceph_crypto_key *key);
 extern void ceph_auth_destroy(struct ceph_auth_client *ac);
 
 extern void ceph_auth_reset(struct ceph_auth_client *ac);
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index 0d2e0ff..6365f04 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -61,7 +61,7 @@ struct ceph_options {
 					      pointer type of args */
 	int num_mon;
 	char *name;
-	char *secret;
+	struct ceph_crypto_key *key;
 };
 
 /*
diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h
index 6f9f19d..b454dfc 100644
--- a/include/linux/cfag12864b.h
+++ b/include/linux/cfag12864b.h
@@ -44,7 +44,7 @@ extern unsigned char * cfag12864b_buffer;
 /*
  * Get the refresh rate of the LCD
  *
- * Returns the refresh rate (hertzs).
+ * Returns the refresh rate (hertz).
  */
 extern unsigned int cfag12864b_getrate(void);
 
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index e654fa2..5ac7ebc 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -240,7 +240,7 @@ struct cgroup {
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
 
-	/* List of events which userspace want to recieve */
+	/* List of events which userspace want to receive */
 	struct list_head event_list;
 	spinlock_t event_list_lock;
 };
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 72bfefd..3c4aac4 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -20,7 +20,7 @@ typedef struct atreq {
 } atreq_t;
 
 
-/* what is particularly stupid in the original driver is the arch-dependant
+/* what is particularly stupid in the original driver is the arch-dependent
  * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
  * will lay out the structure members differently than the 64bit kernel.
  *
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index ddb7a97..645778a 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -218,7 +218,7 @@ static ssize_t _item##_attr_store(struct config_item *item,		\
  * group children.  default_groups may coexist alongsize make_group() or
  * make_item(), but if the group wishes to have only default_groups
  * children (disallowing mkdir(2)), it need not provide either function.
- * If the group has commit(), it supports pending and commited (active)
+ * If the group has commit(), it supports pending and committed (active)
  * items.
  */
 struct configfs_item_operations {
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 372a258..c230494 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -310,7 +310,7 @@ struct cper_sec_proc_ia {
 	__u8	cpuid[48];
 };
 
-/* IA32/X64 Processor Error Infomation Structure */
+/* IA32/X64 Processor Error Information Structure */
 struct cper_ia_err_info {
 	uuid_le	err_type;
 	__u64	validation_bits;
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 4cb72b9..7925bf0 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -16,7 +16,7 @@
 
 /*
  * Some architectures want to ensure there is no local data in their
- * pre-boot environment, so that data can arbitarily relocated (via
+ * pre-boot environment, so that data can arbitrarily relocated (via
  * GOT references).  This is achieved by defining STATIC_RW_DATA to
  * be null.
  */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9bebd7f..eee7add 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -434,7 +434,7 @@ struct dma_tx_state {
  *	zero or error code
  * @device_tx_status: poll for transaction completion, the optional
  *	txstate parameter can be supplied with a pointer to get a
- *	struct with auxilary transfer status information, otherwise the call
+ *	struct with auxiliary transfer status information, otherwise the call
  *	will just return a simple status code
  * @device_issue_pending: push pending transactions to hardware
  */
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index d18d673..cec467f 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -36,7 +36,7 @@
 #include <sys/wait.h>
 #include <limits.h>
 
-/* Altough the Linux source code makes a difference between
+/* Although the Linux source code makes a difference between
    generic endianness and the bitfields' endianness, there is no
    architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness
    does not match the generic endianness. */
@@ -184,7 +184,7 @@ enum drbd_conns {
 	/* These temporal states are all used on the way
 	 * from >= C_CONNECTED to Unconnected.
 	 * The 'disconnect reason' states
-	 * I do not allow to change beween them. */
+	 * I do not allow to change between them. */
 	C_TIMEOUT,
 	C_BROKEN_PIPE,
 	C_NETWORK_FAILURE,
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
index bb264a5..246f576 100644
--- a/include/linux/drbd_limits.h
+++ b/include/linux/drbd_limits.h
@@ -43,7 +43,7 @@
 
 /* net { */
   /* timeout, unit centi seconds
-   * more than one minute timeout is not usefull */
+   * more than one minute timeout is not useful */
 #define DRBD_TIMEOUT_MIN 1
 #define DRBD_TIMEOUT_MAX 600
 #define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
@@ -68,7 +68,7 @@
 #define DRBD_MAX_EPOCH_SIZE_MAX 20000
 #define DRBD_MAX_EPOCH_SIZE_DEF 2048
 
-  /* I don't think that a tcp send buffer of more than 10M is usefull */
+  /* I don't think that a tcp send buffer of more than 10M is useful */
 #define DRBD_SNDBUF_SIZE_MIN  0
 #define DRBD_SNDBUF_SIZE_MAX  (10<<20)
 #define DRBD_SNDBUF_SIZE_DEF  0
@@ -101,7 +101,7 @@
 #define DRBD_RATE_MAX (4 << 20)
 #define DRBD_RATE_DEF 250  /* kb/second */
 
-  /* less than 7 would hit performance unneccessarily.
+  /* less than 7 would hit performance unnecessarily.
    * 3833 is the largest prime that still does fit
    * into 64 sectors of activity log */
 #define DRBD_AL_EXTENTS_MIN  7
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index d93efcc445..21a8ebf 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -101,7 +101,6 @@ extern void elv_dispatch_sort(struct request_queue *, struct request *);
 extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
 extern void elv_add_request(struct request_queue *, struct request *, int);
 extern void __elv_add_request(struct request_queue *, struct request *, int);
-extern void elv_insert(struct request_queue *, struct request *, int);
 extern int elv_merge(struct request_queue *, struct request **, struct bio *);
 extern int elv_try_merge(struct request *, struct bio *);
 extern void elv_merge_requests(struct request_queue *, struct request *,
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c7eff13..12cfbd0 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -623,7 +623,7 @@ struct ethtool_sfeatures {
  * values of corresponding bits in features[].requested. Bits in .requested
  * not set in .valid or not changeable are ignored.
  *
- * Returns %EINVAL when .valid contains undefined or never-changable bits
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
  * or size is not equal to required number of features words (32-bit blocks).
  * Returns >= 0 if request was completed; bits set in the value mean:
  *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index f6856a5..f362733 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -1,5 +1,5 @@
 /*
- *  include/linux/eventpoll.h ( Efficent event polling implementation )
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
  *  Copyright (C) 2001,...,2006	 Davide Libenzi
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index 33a42f2..3a4cef5 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -120,7 +120,7 @@ struct fid {
  * encode_fh:
  *    @encode_fh should store in the file handle fragment @fh (using at most
  *    @max_len bytes) information that can be used by @decode_fh to recover the
- *    file refered to by the &struct dentry @de.  If the @connectable flag is
+ *    file referred to by the &struct dentry @de.  If the @connectable flag is
  *    set, the encode_fh() should store sufficient information so that a good
  *    attempt can be made to find not only the file but also it's place in the
  *    filesystem.   This typically means storing a reference to de->d_parent in
diff --git a/include/linux/fb.h b/include/linux/fb.h
index b2a3639..df728c1 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -534,14 +534,14 @@ struct fb_cursor_user {
 #define FB_EVENT_GET_CONSOLE_MAP        0x07
 /*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
 #define FB_EVENT_SET_CONSOLE_MAP        0x08
-/*      A hardware display blank change occured */
+/*      A hardware display blank change occurred */
 #define FB_EVENT_BLANK                  0x09
 /*      Private modelist is to be replaced */
 #define FB_EVENT_NEW_MODELIST           0x0A
 /*	The resolution of the passed in fb_info about to change and
         all vc's should be changed         */
 #define FB_EVENT_MODE_CHANGE_ALL	0x0B
-/*	A software display blank change occured */
+/*	A software display blank change occurred */
 #define FB_EVENT_CONBLANK               0x0C
 /*      Get drawing requirements        */
 #define FB_EVENT_GET_REQ                0x0D
@@ -805,7 +805,7 @@ struct fb_tile_ops {
 /* A driver may set this flag to indicate that it does want a set_par to be
  * called every time when fbcon_switch is executed. The advantage is that with
  * this flag set you can really be sure that set_par is always called before
- * any of the functions dependant on the correct hardware state or altering
+ * any of the functions dependent on the correct hardware state or altering
  * that state, even if you are using some broken X releases. The disadvantage
  * is that it introduces unwanted delays to every console switch if set_par
  * is slow. It is a good idea to try this flag in the drivers initialization
@@ -877,7 +877,7 @@ struct fb_info {
 	void *fbcon_par;                /* fbcon use-only private area */
 	/* From here on everything is device dependent */
 	void *par;
-	/* we need the PCI or similiar aperture base/size not
+	/* we need the PCI or similar aperture base/size not
 	   smem_start/size as smem_start may just be an object
 	   allocated inside the aperture so may not actually overlap */
 	struct apertures_struct {
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 59ea406..4ff0988 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -900,7 +900,7 @@ struct fw_cdev_get_cycle_timer2 {
 
 /**
  * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
- * @closure:	Passed back to userspace in correponding iso resource events
+ * @closure:	Passed back to userspace in corresponding iso resource events
  * @channels:	Isochronous channels of which one is to be (de)allocated
  * @bandwidth:	Isochronous bandwidth units to be (de)allocated
  * @handle:	Handle to the allocation, written by the kernel (only valid in
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 52f283c..dbd860a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -465,7 +465,7 @@ struct iattr {
 	struct timespec	ia_ctime;
 
 	/*
-	 * Not an attribute, but an auxilary info for filesystems wanting to
+	 * Not an attribute, but an auxiliary info for filesystems wanting to
 	 * implement an ftruncate() like method.  NOTE: filesystem should
 	 * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL).
 	 */
@@ -613,6 +613,8 @@ struct address_space_operations {
 	int (*error_remove_page)(struct address_space *, struct page *);
 };
 
+extern const struct address_space_operations empty_aops;
+
 /*
  * pagecache_write_begin/pagecache_write_end must be used by general code
  * to write into the pagecache.
@@ -647,7 +649,7 @@ struct address_space {
 } __attribute__((aligned(sizeof(long))));
 	/*
 	 * On most architectures that alignment is already the case; but
-	 * must be enforced here for CRIS, to let the least signficant bit
+	 * must be enforced here for CRIS, to let the least significant bit
 	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
 	 */
 
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index b8581c0..76427e6 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -236,7 +236,7 @@ struct fscache_cache_ops {
 	/* unpin an object in the cache */
 	void (*unpin_object)(struct fscache_object *object);
 
-	/* store the updated auxilliary data on an object */
+	/* store the updated auxiliary data on an object */
 	void (*update_object)(struct fscache_object *object);
 
 	/* discard the resources pinned by an object and effect retirement if
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index ec0dad5..7c4d72f 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -102,9 +102,9 @@ struct fscache_cookie_def {
 	 */
 	void (*get_attr)(const void *cookie_netfs_data, uint64_t *size);
 
-	/* get the auxilliary data from netfs data
+	/* get the auxiliary data from netfs data
 	 * - this function can be absent if the index carries no state data
-	 * - should store the auxilliary data in the buffer
+	 * - should store the auxiliary data in the buffer
 	 * - should return the amount of amount stored
 	 * - not permitted to return an error
 	 * - the netfs data from the cookie being used as the source is
@@ -117,7 +117,7 @@ struct fscache_cookie_def {
 	/* consult the netfs about the state of an object
 	 * - this function can be absent if the index carries no state data
 	 * - the netfs data from the cookie being used as the target is
-	 *   presented, as is the auxilliary data
+	 *   presented, as is the auxiliary data
 	 */
 	enum fscache_checkaux (*check_aux)(void *cookie_netfs_data,
 					   const void *data,
diff --git a/include/linux/hid.h b/include/linux/hid.h
index bb29bb1..42f7e2f 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -799,7 +799,7 @@ static inline int __must_check hid_parse(struct hid_device *hdev)
  *
  * Call this in probe function *after* hid_parse. This will setup HW buffers
  * and start the device (if not deffered to device open). hid_hw_stop must be
- * called if this was successfull.
+ * called if this was successful.
  */
 static inline int __must_check hid_hw_start(struct hid_device *hdev,
 		unsigned int connect_mask)
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
index 9db3d45..d392975 100644
--- a/include/linux/hp_sdc.h
+++ b/include/linux/hp_sdc.h
@@ -101,7 +101,7 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
 #define HP_SDC_STATUS_REG	0x40	/* Data from an i8042 register */
 #define HP_SDC_STATUS_HILCMD    0x50	/* Command from HIL MLC */
 #define HP_SDC_STATUS_HILDATA   0x60	/* Data from HIL MLC */
-#define HP_SDC_STATUS_PUP	0x70	/* Sucessful power-up self test */
+#define HP_SDC_STATUS_PUP	0x70	/* Successful power-up self test */
 #define HP_SDC_STATUS_KCOOKED	0x80	/* Key from cooked kbd */
 #define HP_SDC_STATUS_KRPG	0xc0	/* Key from Repeat Gen */
 #define HP_SDC_STATUS_KMOD_SUP	0x10	/* Shift key is up */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index 9e7a12d..a6deef4 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -826,7 +826,7 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
  *	@c: I2O controller
  *
  *	This function tries to get a message frame. If no message frame is
- *	available do not wait until one is availabe (see also i2o_msg_get_wait).
+ *	available do not wait until one is available (see also i2o_msg_get_wait).
  *	The returned pointer to the message frame is not in I/O memory, it is
  *	allocated from a mempool. But because a MFA is allocated from the
  *	controller too it is guaranteed that i2o_msg_post() will never fail.
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 943c9b5..bea0ac7 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -98,7 +98,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
  * @next:	pointer to the next irqaction for shared interrupts
  * @irq:	interrupt number
  * @dir:	pointer to the proc/irq/NN/name entry
- * @thread_fn:	interupt handler function for threaded interrupts
+ * @thread_fn:	interrupt handler function for threaded interrupts
  * @thread:	thread pointer for threaded interrupts
  * @thread_flags:	flags related to @thread
  * @thread_mask:	bitmask for keeping track of @thread activity
@@ -484,7 +484,7 @@ extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
    Properties:
    * If tasklet_schedule() is called, then tasklet is guaranteed
      to be executed on some cpu at least once after this.
-   * If the tasklet is already scheduled, but its excecution is still not
+   * If the tasklet is already scheduled, but its execution is still not
      started, it will be executed only once.
    * If this tasklet is already running on another CPU (or schedule is called
      from tasklet itself), it is rescheduled for later.
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 045f2f2..ca85cf8 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -111,7 +111,7 @@ struct ipmi_ipmb_addr {
  * A LAN Address.  This is an address to/from a LAN interface bridged
  * by the BMC, not an address actually out on the LAN.
  *
- * A concious decision was made here to deviate slightly from the IPMI
+ * A conscious decision was made here to deviate slightly from the IPMI
  * spec.  We do not use rqSWID and rsSWID like it shows in the
  * message.  Instead, we use remote_SWID and local_SWID.  This means
  * that any message (a request or response) from another device will
@@ -259,7 +259,7 @@ struct ipmi_recv_msg {
 	void (*done)(struct ipmi_recv_msg *msg);
 
 	/* Place-holder for the data, don't make any assumptions about
-	   the size or existance of this, since it may change. */
+	   the size or existence of this, since it may change. */
 	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
 };
 
diff --git a/include/linux/isdn/hdlc.h b/include/linux/isdn/hdlc.h
index 4b3ecc4..9652137 100644
--- a/include/linux/isdn/hdlc.h
+++ b/include/linux/isdn/hdlc.h
@@ -2,7 +2,7 @@
  * hdlc.h  --  General purpose ISDN HDLC decoder.
  *
  * Implementation of a HDLC decoder/encoder in software.
- * Neccessary because some ISDN devices don't have HDLC
+ * Necessary because some ISDN devices don't have HDLC
  * controllers.
  *
  * Copyright (C)
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h
index 88b4589..94ab5e9 100644
--- a/include/linux/ixjuser.h
+++ b/include/linux/ixjuser.h
@@ -50,7 +50,7 @@
 * IOCTL's used for the Quicknet Telephony Cards
 *
 * If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before futher use.
+* reset the SRAM values before further use.
 *
 ******************************************************************************/
 
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 922aa31..f97672a 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -42,7 +42,7 @@
 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
 
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
+/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
  * This however means trouble for large NOM, because (NOM << LSH) may no
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 03e8e8d..c2478a3 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -208,6 +208,7 @@ int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
 		unsigned long long *crash_size, unsigned long long *crash_base);
 int crash_shrink_memory(unsigned long new_size);
 size_t crash_get_memory_size(void);
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
 
 #else /* !CONFIG_KEXEC */
 struct pt_regs;
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index e1ceaa9..603bec2 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -35,7 +35,7 @@
  *
  * On 32-bit CPUs an optimized representation of the timespec structure
  * is used to avoid expensive conversions from and to timespecs. The
- * endian-aware order of the tv struct members is choosen to allow
+ * endian-aware order of the tv struct members is chosen to allow
  * mathematical operations on the tv64 member of the union too, which
  * for certain operations produces better code.
  *
@@ -158,7 +158,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
  * @lhs:	minuend
  * @rhs:	subtrahend
  *
- * Returns the remainder of the substraction
+ * Returns the remainder of the subtraction
  */
 static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
 {
diff --git a/include/linux/led-lm3530.h b/include/linux/led-lm3530.h
index bb69d20..58592fa 100644
--- a/include/linux/led-lm3530.h
+++ b/include/linux/led-lm3530.h
@@ -41,7 +41,7 @@
 #define LM3530_RAMP_TIME_8s		(7)
 
 /* ALS Resistor Select */
-#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedence */
+#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedance */
 #define LM3530_ALS_IMPD_13_53kOhm	(0x01)
 #define LM3530_ALS_IMPD_9_01kOhm	(0x02)
 #define LM3530_ALS_IMPD_5_41kOhm	(0x03)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c71f469..7f675aa 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -364,7 +364,7 @@ enum {
 	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
 
 	/* Horkage types. May be set by libata or controller on drives
-	   (some horkage may be drive/controller pair dependant */
+	   (some horkage may be drive/controller pair dependent */
 
 	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
 	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
index 78fbf24..6a4fab7 100644
--- a/include/linux/lru_cache.h
+++ b/include/linux/lru_cache.h
@@ -148,7 +148,7 @@ write intent log information, three of which are mentioned here.
  *
  * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache
  * (total memory usage 2 pages), and up to 3833 elements on the act_log
- * lru_cache, totalling ~215 kB for 64bit architechture, ~53 pages.
+ * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages.
  *
  * We usually do not actually free these objects again, but only "recycle"
  * them, as the change "index: -old_label, +LC_FREE" would need a transaction
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index e786fe9..579b50c 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -1,5 +1,5 @@
 /*
- * pmic.h  --  Power Managment Driver for Wolfson WM8350 PMIC
+ * pmic.h  --  Power Management Driver for Wolfson WM8350 PMIC
  *
  * Copyright 2007 Wolfson Microelectronics PLC
  *
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 7606d7d..692dbae 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -608,7 +608,7 @@ static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
 #endif
 
 /*
- * Define the bit shifts to access each section.  For non-existant
+ * Define the bit shifts to access each section.  For non-existent
  * sections we define the shift as 0; that plus a 0 mask ensures
  * the compiler will optimise away reference to them.
  */
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index c0207a7..bdd7cee 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -98,7 +98,7 @@ struct mmc_data;
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
@@ -172,7 +172,7 @@ struct dw_mci_dma_ops {
 #define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
 /* delay needed between retries on some 2.11a implementations */
 #define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
-/* High Speed Capable - Supports HS cards (upto 50MHz) */
+/* High Speed Capable - Supports HS cards (up to 50MHz) */
 #define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
 /* Unreliable card detection */
 #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 9d2deb2..a3759cb 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -249,7 +249,7 @@ static inline int ip6mr_sk_done(struct sock *sk)
  * Structure used to communicate from kernel to multicast router.
  * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
  * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on wich an application will only receiver the payload i.e the data after
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
  * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
  */
 
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
index 0d823f2..d249254 100644
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -308,7 +308,7 @@ static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
 	
 	addr = (cmd_ofs * type) * interleave;
 
-	/* Modify the unlock address if we are in compatiblity mode.
+	/* Modify the unlock address if we are in compatibility mode.
 	 * For 16bit devices on 8 bit busses
 	 * and 32bit devices on 16 bit busses
 	 * set the low bit of the alternating bit sequence of the address.
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index ae67ef5..d441927 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -416,9 +416,9 @@ struct nand_buffers {
  * @select_chip:	[REPLACEABLE] select chip nr
  * @block_bad:		[REPLACEABLE] check, if the block is bad
  * @block_markbad:	[REPLACEABLE] mark the block bad
- * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific funtion for controlling
+ * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
- * @init_size:		[BOARDSPECIFIC] hardwarespecific funtion for setting
+ * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
@@ -437,7 +437,7 @@ struct nand_buffers {
  * @erase_cmd:		[INTERN] erase command write function, selectable due
  *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering
+ * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
  * @oob_poi:		poison value buffer
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
index 36efcba..abed4de 100644
--- a/include/linux/mtd/xip.h
+++ b/include/linux/mtd/xip.h
@@ -51,7 +51,7 @@
  * 	return in usecs the elapsed timebetween now and the reference x as
  * 	returned by xip_currtime().
  *
- * 	note 1: convertion to usec can be approximated, as long as the
+ * 	note 1: conversion to usec can be approximated, as long as the
  * 		returned value is <= the real elapsed time.
  * 	note 2: this should be able to cope with a few seconds without
  * 		overflowing.
diff --git a/include/linux/netfilter/nf_conntrack_proto_gre.h b/include/linux/netfilter/nf_conntrack_proto_gre.h
index 2a10efd..6a0664c 100644
--- a/include/linux/netfilter/nf_conntrack_proto_gre.h
+++ b/include/linux/netfilter/nf_conntrack_proto_gre.h
@@ -60,7 +60,7 @@ struct gre_hdr_pptp {
 	__be16 payload_len;	/* size of ppp payload, not inc. gre header */
 	__be16 call_id;		/* peer's call_id for this session */
 	__be32 seq;		/* sequence number.  Present if S==1 */
-	__be32 ack;		/* seq number of highest packet recieved by */
+	__be32 ack;		/* seq number of highest packet received by */
 				/*  sender in this session */
 };
 
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index 1c6f0c5..8797ed1 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -92,7 +92,7 @@ struct ebt_entries {
 
 /* This is a hack to make a difference between an ebt_entry struct and an
  * ebt_entries struct when traversing the entries from start to end.
- * Using this simplifies the code alot, while still being able to use
+ * Using this simplifies the code a lot, while still being able to use
  * ebt_entries.
  * Contrary, iptables doesn't use something like ebt_entries and therefore uses
  * different techniques for naming the policy and such. So, iptables doesn't
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index b528f6d..178fafe 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -359,7 +359,7 @@ enum nfsstat4 {
 						/* Error 10073 is unused. */
 	NFS4ERR_CLIENTID_BUSY	= 10074,	/* clientid has state */
 	NFS4ERR_PNFS_IO_HOLE	= 10075,	/* IO to _SPARSE file hole */
-	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not origional */
+	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not original */
 	NFS4ERR_BAD_HIGH_SLOT	= 10077,	/* sequence arg bad */
 	NFS4ERR_DEADSESSION	= 10078,	/* persistent session dead */
 	NFS4ERR_ENCR_ALG_UNSUPP = 10079,	/* SSV alg mismatch */
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index bd31615..84058ec 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -80,7 +80,7 @@ struct nfsd4_fs_locations {
 
 /*
  * We keep an array of pseudoflavors with the export, in order from most
- * to least preferred.  For the forseeable future, we don't expect more
+ * to least preferred.  For the foreseeable future, we don't expect more
  * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3,
  * spkm3i, and spkm3p (and using all 8 at once should be rare).
  */
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index 80d55bb..f76d80c 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -49,7 +49,7 @@ struct nfs_fhbase_old {
  *
  * The auth_type field specifies how the filehandle can be authenticated
  * This might allow a file to be confirmed to be in a writable part of a
- * filetree without checking the path from it upto the root.
+ * filetree without checking the path from it up to the root.
  * Current values:
  *     0  - No authentication.  fb_auth is 0 bytes long
  * Possible future values:
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 3002218..bbfa109 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -414,7 +414,7 @@
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
 enum nl80211_commands {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
 	NL80211_CMD_UNSPEC,
 
 	NL80211_CMD_GET_WIPHY,		/* can dump */
@@ -860,7 +860,7 @@ enum nl80211_commands {
  *	This can be used to mask out antennas which are not attached or should
  *	not be used for receiving. If an antenna is not selected in this bitmap
  *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
  *
  * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
  *	for configuration as TX antennas via the above parameters.
@@ -891,7 +891,7 @@ enum nl80211_commands {
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_attrs {
-/* don't change the order or add anything inbetween, this is ABI! */
+/* don't change the order or add anything between, this is ABI! */
 	NL80211_ATTR_UNSPEC,
 
 	NL80211_ATTR_WIPHY,
@@ -1419,7 +1419,7 @@ enum nl80211_bitrate_attr {
  * 	802.11 country information element with regulatory information it
  * 	thinks we should consider. cfg80211 only processes the country
  *	code from the IE, and relies on the regulatory domain information
- *	structure pased by userspace (CRDA) from our wireless-regdb.
+ *	structure passed by userspace (CRDA) from our wireless-regdb.
  *	If a channel is enabled but the country code indicates it should
  *	be disabled we disable the channel and re-enable it upon disassociation.
  */
@@ -1598,7 +1598,7 @@ enum nl80211_mntr_flags {
  * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
  * millisecond units, used by the Peer Link Open message
  *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
  * millisecond units, used by the peer link management to close a peer link
  *
  * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 2026f9e..621dfa1 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -237,7 +237,7 @@ static inline int notifier_to_errno(int ret)
 					* enabling interrupts. Must not sleep,
 					* must not fail */
 
-/* Used for CPU hotplug events occuring while tasks are frozen due to a suspend
+/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend
  * operation in progress
  */
 #define CPU_TASKS_FROZEN	0x0010
diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h
index 150822b..b6111f8 100644
--- a/include/linux/omap3isp.h
+++ b/include/linux/omap3isp.h
@@ -250,7 +250,7 @@ enum omap3isp_h3a_af_rgbpos {
 /* Contains the information regarding the Horizontal Median Filter */
 struct omap3isp_h3a_af_hmf {
 	__u8 enable;	/* Status of Horizontal Median Filter */
-	__u8 threshold;	/* Threshhold Value for Horizontal Median Filter */
+	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
 };
 
 /* Contains the information regarding the IIR Filters */
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index f5de21d..961ecc7 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -138,7 +138,7 @@ static inline void move_unlock_page_cgroup(struct page_cgroup *pc,
 
 #define PCG_ARRAYID_OFFSET	(BITS_PER_LONG - PCG_ARRAYID_WIDTH)
 /*
- * Zero the shift count for non-existant fields, to prevent compiler
+ * Zero the shift count for non-existent fields, to prevent compiler
  * warnings and ensure references are optimized away.
  */
 #define PCG_ARRAYID_SHIFT	(PCG_ARRAYID_OFFSET * (PCG_ARRAYID_WIDTH != 0))
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 11fd381..4e2c915 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -518,7 +518,7 @@
 #define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
 #define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
 #define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
-#define PCI_DEVICE_ID_AMD_15H_NB_LINK	0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index 5b7e6b1..be01380 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -223,7 +223,7 @@
 #define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
 #define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
 #define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
-#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxilliary power support mask */
+#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
 #define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
 #define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
 #define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
@@ -435,7 +435,7 @@
 #define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
 #define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
 #define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
-#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Suprise Down Error Reporting Capable */
+#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
 #define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
 #define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
 #define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 311b4dc..ee9f1e7 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -662,7 +662,7 @@ struct pmu {
 	int  (*commit_txn)	(struct pmu *pmu); /* optional */
 	/*
 	 * Will cancel the transaction, assumes ->del() is called
-	 * for each successfull ->add() during the transaction.
+	 * for each successful ->add() during the transaction.
 	 */
 	void (*cancel_txn)	(struct pmu *pmu); /* optional */
 };
@@ -1086,7 +1086,7 @@ void perf_event_task_sched_out(struct task_struct *task, struct task_struct *nex
 {
 	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
 
-	COND_STMT(&perf_sched_events, __perf_event_task_sched_out(task, next));
+	__perf_event_task_sched_out(task, next);
 }
 
 extern void perf_event_mmap(struct vm_area_struct *vma);
diff --git a/include/linux/pid.h b/include/linux/pid.h
index efceda0..31afb7e 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -21,7 +21,7 @@ enum pid_type
  * quickly from the numeric pid value.  The attached processes may be
  * quickly accessed by following pointers from struct pid.
  *
- * Storing pid_t values in the kernel and refering to them later has a
+ * Storing pid_t values in the kernel and referring to them later has a
  * problem.  The process originally with that pid may have exited and the
  * pid allocator wrapped, and another process could have come along
  * and been assigned that pid.
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index 8062e0a..c533670 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -223,7 +223,7 @@ struct tc_gred_qopt {
 	__u32		limit;        /* HARD maximal queue length (bytes)    */
 	__u32		qth_min;      /* Min average length threshold (bytes) */
 	__u32		qth_max;      /* Max average length threshold (bytes) */
-	__u32		DP;           /* upto 2^32 DPs */
+	__u32		DP;           /* up to 2^32 DPs */
 	__u32		backlog;
 	__u32		qave;
 	__u32		forced;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 1a2ccd6..cf40010 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -82,7 +82,7 @@ static inline int poll_schedule(struct poll_wqueues *pwq, int state)
 }
 
 /*
- * Scaleable version of the fd_set.
+ * Scalable version of the fd_set.
  */
 
 typedef struct {
diff --git a/include/linux/prefetch.h b/include/linux/prefetch.h
index af7c36a..a3bfbdf 100644
--- a/include/linux/prefetch.h
+++ b/include/linux/prefetch.h
@@ -29,7 +29,7 @@
 	prefetchw(x)	- prefetches the cacheline at "x" for write
 	spin_lock_prefetch(x) - prefetches the spinlock *x for taking
 	
-	there is also PREFETCH_STRIDE which is the architecure-prefered 
+	there is also PREFETCH_STRIDE which is the architecure-preferred 
 	"lookahead" size for prefetching streamed operations.
 	
 */
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 2f691e4..44835fb 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -122,7 +122,7 @@
 #define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
 #define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
 #define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
 #define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
 #define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
 #define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index ffa2efb..75cbf4f 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -251,7 +251,7 @@ struct mdp_superblock_1 {
 	__le64	utime;		/* 40 bits second, 24 btes microseconds */
 	__le64	events;		/* incremented when superblock updated */
 	__le64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
-	__le32	sb_csum;	/* checksum upto devs[max_dev] */
+	__le32	sb_csum;	/* checksum up to devs[max_dev] */
 	__le32	max_dev;	/* size of devs[] array to consider */
 	__u8	pad3[64-32];	/* set to 0 when writing */
 
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index af56148..ff422d2 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -339,6 +339,12 @@ extern int rcu_my_thread_group_empty(void);
 		((typeof(*p) __force __kernel *)(p)); \
 	})
 
+#define __rcu_access_index(p, space) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		rcu_dereference_sparse(p, space); \
+		(_________p1); \
+	})
 #define __rcu_dereference_index_check(p, c) \
 	({ \
 		typeof(p) _________p1 = ACCESS_ONCE(p); \
@@ -429,6 +435,20 @@ extern int rcu_my_thread_group_empty(void);
 #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
 
 /**
+ * rcu_access_index() - fetch RCU index with no dereferencing
+ * @p: The index to read
+ *
+ * Return the value of the specified RCU-protected index, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
+ * when the value of this index is accessed, but the index is not
+ * dereferenced, for example, when testing an RCU-protected index against
+ * -1.  Although rcu_access_index() may also be used in cases where
+ * update-side locks prevent the value of the index from changing, you
+ * should instead use rcu_dereference_index_protected() for this use case.
+ */
+#define rcu_access_index(p) __rcu_access_index((p), __rcu)
+
+/**
  * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
  * @p: The pointer to read, prior to dereferencing
  * @c: The conditions under which the dereference will take place
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 0a3842a..eca75df 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -1557,7 +1557,7 @@ struct tree_balance {
 /* When inserting an item. */
 #define M_INSERT	'i'
 /* When inserting into (directories only) or appending onto an already
-   existant item. */
+   existent item. */
 #define M_PASTE		'p'
 /* When deleting an item. */
 #define M_DELETE	'd'
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 83bd2e2..4ec2c02 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -854,7 +854,7 @@ extern int __weak arch_sd_sibiling_asym_packing(void);
 
 /*
  * Optimise SD flags for power savings:
- * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings.
+ * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings.
  * Keep default SD flags if sched_{smt,mc}_power_saving=0
  */
 
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d9e52fa..d0ae90a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -474,7 +474,7 @@ static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
 extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst);
 
 /**
- * skb_dst_is_noref - Test if skb dst isnt refcounted
+ * skb_dst_is_noref - Test if skb dst isn't refcounted
  * @skb: buffer
  */
 static inline bool skb_dst_is_noref(const struct sk_buff *skb)
diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h
index bc21db5..76199b7 100644
--- a/include/linux/smc91x.h
+++ b/include/linux/smc91x.h
@@ -21,7 +21,7 @@
 #define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
 #define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
 #define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
-#define RPC_LED_100	(0x05)	/* LED = 100Mbps link dectect */
+#define RPC_LED_100	(0x05)	/* LED = 100Mbps link detect */
 #define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
 #define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index edbb1d0..d2b5e98 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -88,7 +88,7 @@ struct cmsghdr {
 };
 
 /*
- *	Ancilliary data object information MACROS
+ *	Ancillary data object information MACROS
  *	Table 5-14 of POSIX 1003.1g
  */
 
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index 1904afe..fe204fe 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1231,7 +1231,7 @@ void seqbuf_dump(void);	/* This function must be provided by programs */
 #define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
 
 /*
- * Timing and syncronization macros
+ * Timing and synchronization macros
  */
 
 #define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h
index bf0570a..52d9ed0 100644
--- a/include/linux/spi/spidev.h
+++ b/include/linux/spi/spidev.h
@@ -66,7 +66,7 @@
  * are in a different address space (and may be of different sizes in some
  * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
  * Zero-initialize the structure, including currently unused fields, to
- * accomodate potential future updates.
+ * accommodate potential future updates.
  *
  * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
  * Pass it an array of related transfers, they'll execute together.
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 80e5358..0b22d51 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -81,7 +81,7 @@
 #include <linux/spinlock_types.h>
 
 /*
- * Pull the arch_spin*() functions/declarations (UP-nondebug doesnt need them):
+ * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them):
  */
 #ifdef CONFIG_SMP
 # include <asm/spinlock.h>
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index e103529..f29197a 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -26,7 +26,7 @@
 #ifndef __STMMAC_PLATFORM_DATA
 #define __STMMAC_PLATFORM_DATA
 
-/* platfrom data for platfrom device structure's platfrom_data field */
+/* platform data for platform device structure's platform_data field */
 
 /* Private data for the STM on-board ethernet driver */
 struct plat_stmmacenet_data {
diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index 1808960..092dc9b 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -105,7 +105,7 @@ static inline int try_stop_cpus(const struct cpumask *cpumask,
  * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
  *
  * Description: This causes a thread to be scheduled on every cpu,
- * each of which disables interrupts.  The result is that noone is
+ * each of which disables interrupts.  The result is that no one is
  * holding a spinlock or inside any other preempt-disabled region when
  * @fn() runs.
  *
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 7898ea1..8d2eef1 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -35,10 +35,10 @@
  * Each cache must be registered so that it can be cleaned regularly.
  * When the cache is unregistered, it is flushed completely.
  *
- * Entries have a ref count and a 'hashed' flag which counts the existance
+ * Entries have a ref count and a 'hashed' flag which counts the existence
  * in the hash table.
  * We only expire entries when refcount is zero.
- * Existance in the cache is counted  the refcount.
+ * Existence in the cache is counted  the refcount.
  */
 
 /* Every cache item has a common header that is used
diff --git a/include/linux/sunrpc/svcauth_gss.h b/include/linux/sunrpc/svcauth_gss.h
index ca7d725..83bbee3 100644
--- a/include/linux/sunrpc/svcauth_gss.h
+++ b/include/linux/sunrpc/svcauth_gss.h
@@ -2,7 +2,7 @@
  * linux/include/linux/sunrpc/svcauth_gss.h
  *
  * Bruce Fields <bfields@umich.edu>
- * Copyright (c) 2002 The Regents of the Unviersity of Michigan
+ * Copyright (c) 2002 The Regents of the University of Michigan
  */
 
 #ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h
index 8a75da5..dfb078d 100644
--- a/include/linux/sysdev.h
+++ b/include/linux/sysdev.h
@@ -7,13 +7,13 @@
  * We still have a notion of a driver for a system device, because we still
  * want to perform basic operations on these devices. 
  *
- * We also support auxillary drivers binding to devices of a certain class.
+ * We also support auxiliary drivers binding to devices of a certain class.
  * 
  * This allows configurable drivers to register themselves for devices of
  * a certain type. And, it allows class definitions to reside in generic
  * code while arch-specific code can register specific drivers.
  *
- * Auxillary drivers registered with a NULL cls are registered as drivers
+ * Auxiliary drivers registered with a NULL cls are registered as drivers
  * for all system devices, and get notification calls for each device. 
  */
 
@@ -70,7 +70,7 @@ extern int sysdev_class_create_file(struct sysdev_class *,
 extern void sysdev_class_remove_file(struct sysdev_class *,
 	struct sysdev_class_attribute *);
 /**
- * Auxillary system device drivers.
+ * Auxiliary system device drivers.
  */
 
 struct sysdev_driver {
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
index d24aaba..a520fd7 100644
--- a/include/linux/timerqueue.h
+++ b/include/linux/timerqueue.h
@@ -24,7 +24,7 @@ extern struct timerqueue_node *timerqueue_iterate_next(
 						struct timerqueue_node *node);
 
 /**
- * timerqueue_getnext - Returns the timer with the earlies expiration time
+ * timerqueue_getnext - Returns the timer with the earliest expiration time
  *
  * @head: head of timerqueue
  *
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index 3a2e66d..ebcfa4e 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -169,7 +169,7 @@ static inline int tracehook_unsafe_exec(struct task_struct *task)
  * tracehook_tracer_task - return the task that is tracing the given task
  * @tsk:		task to consider
  *
- * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * Returns NULL if no one is tracing @task, or the &struct task_struct
  * pointer to its tracer.
  *
  * Must called under rcu_read_lock().  The pointer returned might be kept
@@ -448,7 +448,7 @@ static inline int tracehook_force_sigpending(void)
  *
  * Return zero to check for a real pending signal normally.
  * Return -1 after releasing the siglock to repeat the check.
- * Return a signal number to induce an artifical signal delivery,
+ * Return a signal number to induce an artificial signal delivery,
  * setting *@info and *@return_ka to specify its details and behavior.
  *
  * The @return_ka->sa_handler value controls the disposition of the
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index 1b47909..5c75153 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -8,7 +8,7 @@
  *  Copyright:	MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/include/linux/usb.h b/include/linux/usb.h
index e63efeb..65f78ca 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -623,7 +623,7 @@ extern struct usb_host_interface *usb_find_alt_setting(
  * USB hubs.  That makes it stay the same until systems are physically
  * reconfigured, by re-cabling a tree of USB devices or by moving USB host
  * controllers.  Adding and removing devices, including virtual root hubs
- * in host controller driver modules, does not change these path identifers;
+ * in host controller driver modules, does not change these path identifiers;
  * neither does rebooting or re-enumerating.  These are more useful identifiers
  * than changeable ("unstable") ones like bus numbers or device addresses.
  *
@@ -793,7 +793,7 @@ struct usbdrv_wrap {
  *	usb_set_intfdata() to associate driver-specific data with the
  *	interface.  It may also use usb_set_interface() to specify the
  *	appropriate altsetting.  If unwilling to manage the interface,
- *	return -ENODEV, if genuine IO errors occured, an appropriate
+ *	return -ENODEV, if genuine IO errors occurred, an appropriate
  *	negative errno value.
  * @disconnect: Called when the interface is no longer accessible, usually
  *	because its device has been (or is being) disconnected or the
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3d29a7d..882a084a 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -188,7 +188,7 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
  * @bind() method is then used to initialize all the functions and then
  * call @usb_add_function() for them.
  *
- * Those functions would normally be independant of each other, but that's
+ * Those functions would normally be independent of each other, but that's
  * not mandatory.  CDC WMC devices are an example where functions often
  * depend on other functions, with some functions subsidiary to others.
  * Such interdependency may be managed in any way, so long as all of the
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 6563802..e49dfd4 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -159,7 +159,7 @@ struct ehci_regs {
 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
 
 /* Moorestown has some non-standard registers, partially due to the fact that
- * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
  * PORTSCx
  */
 #define HOSTPC0		0x84		/* HOSTPC extension */
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 6f649c1..7587ef9 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -45,7 +45,7 @@ struct usb_functionfs_descs_head {
  * | off | name      | type         | description                          |
  * |-----+-----------+--------------+--------------------------------------|
  * |   0 | magic     | LE32         | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
- * |   4 | lenght    | LE32         | length of the whole data chunk       |
+ * |   4 | length    | LE32         | length of the whole data chunk       |
  * |   8 | fs_count  | LE32         | number of full-speed descriptors     |
  * |  12 | hs_count  | LE32         | number of high-speed descriptors     |
  * |  16 | fs_descrs | Descriptor[] | list of full-speed descriptors       |
@@ -86,7 +86,7 @@ struct usb_functionfs_strings_head {
  * |   0 | lang    | LE16              | language code                      |
  * |   2 | strings | String[str_count] | array of strings in given language |
  *
- * For each string ther is one strings entry (ie. there are str_count
+ * For each string there is one strings entry (ie. there are str_count
  * string entries).  Each String is a NUL terminated string encoded in
  * UTF-8.
  */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 006412c..e538172 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -72,7 +72,7 @@ struct usb_ep;
  * Bulk endpoints can use any size buffers, and can also be used for interrupt
  * transfers. interrupt-only endpoints can be much less functional.
  *
- * NOTE:  this is analagous to 'struct urb' on the host side, except that
+ * NOTE:  this is analogous to 'struct urb' on the host side, except that
  * it's thinner and promotes more pre-allocation.
  */
 
@@ -269,7 +269,7 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
  *
  * Control endpoints ... after getting a setup() callback, the driver queues
  * one response (even if it would be zero length).  That enables the
- * status ack, after transfering data as specified in the response.  Setup
+ * status ack, after transferring data as specified in the response.  Setup
  * functions may return negative error codes to generate protocol stalls.
  * (Note that some USB device controllers disallow protocol stall responses
  * in some cases.)  When control responses are deferred (the response is
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
index 1d10408..c8c52e3 100644
--- a/include/linux/usb/midi.h
+++ b/include/linux/usb/midi.h
@@ -70,7 +70,7 @@ struct usb_midi_out_jack_descriptor {
 	__u8  bJackID;
 	__u8  bNrInputPins;		/* p */
 	struct usb_midi_source_pin pins[]; /* [p] */
-	/*__u8  iJack;  -- ommitted due to variable-sized pins[] */
+	/*__u8  iJack;  -- omitted due to variable-sized pins[] */
 } __attribute__ ((packed));
 
 #define USB_DT_MIDI_OUT_SIZE(p)	(7 + 2 * (p))
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index 63ebdcc..0c4d4ca 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -126,7 +126,7 @@ enum {
 /**
  * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
  *
- * Tells devices the host is going to stop sending MMCs and will dissapear.
+ * Tells devices the host is going to stop sending MMCs and will disappear.
  */
 struct wuie_channel_stop {
 	struct wuie_hdr hdr;
diff --git a/include/linux/uwb.h b/include/linux/uwb.h
index 7fc9746..b0c564e 100644
--- a/include/linux/uwb.h
+++ b/include/linux/uwb.h
@@ -274,7 +274,7 @@ static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
 
 /**
  * struct uwb_drp_avail - a radio controller's view of MAS usage
- * @global:   MAS unused by neighbors (excluding reservations targetted
+ * @global:   MAS unused by neighbors (excluding reservations targeted
  *            or owned by the local radio controller) or the beaon period
  * @local:    MAS unused by local established reservations
  * @pending:  MAS unused by local pending reservations
@@ -702,10 +702,10 @@ void edc_init(struct edc *edc)
 	edc->timestart = jiffies;
 }
 
-/* Called when an error occured.
+/* Called when an error occurred.
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h
index 4b4fc0f..7b48420 100644
--- a/include/linux/uwb/umc.h
+++ b/include/linux/uwb/umc.h
@@ -132,7 +132,7 @@ int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
  *
  * FIXME: This is as dirty as it gets, but we need some way to check
  * the correct type of umc_dev->parent (so that for example, we can
- * cast to pci_dev). Casting to pci_dev is necesary because at some
+ * cast to pci_dev). Casting to pci_dev is necessary because at some
  * point we need to request resources from the device. Mapping is
  * easily over come (ioremap and stuff are bus agnostic), but hooking
  * up to some error handlers (such as pci error handlers) might need
diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h
index e9e1524..9c3120d 100644
--- a/include/linux/vgaarb.h
+++ b/include/linux/vgaarb.h
@@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev,
  *     wether the card is doing legacy decoding for that type of resource. If
  *     yes, the lock is "converted" into a legacy resource lock.
  *     The arbiter will first look for all VGA cards that might conflict
- *     and disable their IOs and/or Memory access, inlcuding VGA forwarding
+ *     and disable their IOs and/or Memory access, including VGA forwarding
  *     on P2P bridges if necessary, so that the requested resources can
  *     be used. Then, the card is marked as locking these resources and
  *     the IO and/or Memory accesse are enabled on the card (including
@@ -187,7 +187,7 @@ extern struct pci_dev *vga_default_device(void);
  *     vga_conflicts
  *
  *     Architectures should define this if they have several
- *     independant PCI domains that can afford concurrent VGA
+ *     independent PCI domains that can afford concurrent VGA
  *     decoding
  */
 
diff --git a/include/linux/wimax.h b/include/linux/wimax.h
index 4fdcc56..9f6b77a 100644
--- a/include/linux/wimax.h
+++ b/include/linux/wimax.h
@@ -114,7 +114,7 @@ enum {
 	WIMAX_GNL_RESET_IFIDX = 1,
 };
 
-/* Atributes for wimax_state_get() */
+/* Attributes for wimax_state_get() */
 enum {
 	WIMAX_GNL_STGET_IFIDX = 1,
 };
diff --git a/include/linux/xilinxfb.h b/include/linux/xilinxfb.h
index f2463f5..5a155a9 100644
--- a/include/linux/xilinxfb.h
+++ b/include/linux/xilinxfb.h
@@ -16,7 +16,7 @@
 /* ML300/403 reference design framebuffer driver platform data struct */
 struct xilinxfb_platform_data {
 	u32 rotate_screen;	/* Flag to rotate display 180 degrees */
-	u32 screen_height_mm;	/* Physical dimentions of screen in mm */
+	u32 screen_height_mm;	/* Physical dimensions of screen in mm */
 	u32 screen_width_mm;
 	u32 xres, yres;		/* resolution of screen in pixels */
 	u32 xvirt, yvirt;	/* resolution of memory buffer */