Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...

5 files changed, 208 insertions, 33 deletions

diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
new file mode 100644
index 0000000..a6911eb
--- /dev/null
+++ b/include/linux/clk/at91_pmc.h
@@ -0,0 +1,192 @@
+/*
+ * include/linux/clk/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_pmc_base;
+
+#define at91_pmc_read(field) \
+	__raw_readl(at91_pmc_base + field)
+
+#define at91_pmc_write(field, value) \
+	__raw_writel(value, at91_pmc_base + field)
+#else
+.extern at91_pmc_base
+#endif
+
+#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_PCK4		(1 << 12)		/* Programmable Clock 4 [AT572D940HF only] */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
+
+#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
+#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
+#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
+#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
+
+#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
+#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_MUL_GET(n)	((n) >> 16 & 0x7ff)
+#define		AT91_PMC3_MUL		(0x7f  << 18)		/* PLL Multiplier [SAMA5 only] */
+#define		AT91_PMC3_MUL_GET(n)	((n) >> 18 & 0x7f)
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
+#define		PMC_PRES_OFFSET		2
+#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
+#define		PMC_ALT_PRES_OFFSET	4
+#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
+#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
+#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
+#define			AT91_PMC_PDIV_1			(0 << 12)
+#define			AT91_PMC_PDIV_2			(1 << 12)
+#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
+#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
+#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
+
+#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
+#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
+#define			AT91_PMC_USBS_PLLA		(0 << 0)
+#define			AT91_PMC_USBS_UPLL		(1 << 0)
+#define			AT91_PMC_USBS_PLLB		(1 << 0)	/* [AT91SAMN12 only] */
+#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
+#define			AT91_PMC_OHCIUSBDIV_1	(0x0 <<  8)
+#define			AT91_PMC_OHCIUSBDIV_2	(0x1 <<  8)
+
+#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
+#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
+#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
+#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
+
+#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
+#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
+#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
+#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
+#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
+
+#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
+#define	AT91_PMC_SR		0x68			/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
+#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
+#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */
+
+#define AT91_PMC_PLLICPR	0x80			/* PLL Charge Pump Current Register */
+
+#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
+#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
+#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
+#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
+
+#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
+#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
+#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
+
+#define AT91_PMC_PCER1		0x100			/* Peripheral Clock Enable Register 1 [SAMA5 only]*/
+#define AT91_PMC_PCDR1		0x104			/* Peripheral Clock Enable Register 1 */
+#define AT91_PMC_PCSR1		0x108			/* Peripheral Clock Enable Register 1 */
+
+#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9 and SAMA5] */
+#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
+#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command (read=0, write=1) */
+#define		AT91_PMC_PCR_DIV(n)	((n)  <<  16)		/* Divisor Value */
+#define			AT91_PMC_PCR_DIV0	0x0			/* Peripheral clock is MCK */
+#define			AT91_PMC_PCR_DIV2	0x1			/* Peripheral clock is MCK/2 */
+#define			AT91_PMC_PCR_DIV4	0x2			/* Peripheral clock is MCK/4 */
+#define			AT91_PMC_PCR_DIV8	0x3			/* Peripheral clock is MCK/8 */
+#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
+
+#endif
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index 23a0cee..3ca9fca 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -120,13 +120,6 @@ static inline void tegra_cpu_clock_resume(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_TEGRA
-void tegra_periph_reset_deassert(struct clk *c);
-void tegra_periph_reset_assert(struct clk *c);
-#else
-static inline void tegra_periph_reset_deassert(struct clk *c) {}
-static inline void tegra_periph_reset_assert(struct clk *c) {}
-#endif
 void tegra_clocks_apply_init_table(void);
 
 #endif /* __LINUX_CLK_TEGRA_H_ */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index ba5f96db..6fd9390 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -1115,6 +1115,7 @@ int dma_async_device_register(struct dma_device *device);
 void dma_async_device_unregister(struct dma_device *device);
 void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
 struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
+struct dma_chan *dma_get_any_slave_channel(struct dma_device *device);
 struct dma_chan *net_dma_find_channel(void);
 #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
 #define dma_request_slave_channel_compat(mask, x, y, dev, name) \
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 50fe651..af414e1 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -11,11 +11,11 @@
 #define SCIx_NOT_SUPPORTED	(-1)
 
 enum {
-	SCBRR_ALGO_1,		/* ((clk + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_NONE,	/* Compute sampling rate in the driver */
+	SCBRR_ALGO_1,		/* clk / (16 * bps) */
+	SCBRR_ALGO_2,		/* DIV_ROUND_CLOSEST(clk, 32 * bps) - 1 */
+	SCBRR_ALGO_3,		/* clk / (8 * bps) */
+	SCBRR_ALGO_4,		/* DIV_ROUND_CLOSEST(clk, 16 * bps) - 1 */
 	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
@@ -70,17 +70,6 @@ enum {
 	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
 };
 
-/* Offsets into the sci_port->gpios array */
-enum {
-	SCIx_SCK,
-	SCIx_RXD,
-	SCIx_TXD,
-	SCIx_CTS,
-	SCIx_RTS,
-
-	SCIx_NR_FNS,
-};
-
 enum {
 	SCIx_PROBE_REGTYPE,
 
@@ -108,10 +97,10 @@ enum {
 }
 
 #define SCIx_IRQ_IS_MUXED(port)			\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] ==	\
-	 (port)->cfg->irqs[SCIx_RXI_IRQ]) ||	\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] &&	\
-	 !(port)->cfg->irqs[SCIx_RXI_IRQ])
+	((port)->irqs[SCIx_ERI_IRQ] ==	\
+	 (port)->irqs[SCIx_RXI_IRQ]) ||	\
+	((port)->irqs[SCIx_ERI_IRQ] &&	\
+	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 /*
  * SCI register subset common for all port types.
  * Not all registers will exist on all parts.
@@ -142,20 +131,17 @@ struct plat_sci_port_ops {
 struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
-	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
 	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
+	unsigned int	sampling_rate;
 	unsigned int	scbrr_algo_id;		/* SCBRR calculation algo */
 	unsigned int	scscr;			/* SCSCR initialization */
 
 	/*
 	 * Platform overrides if necessary, defaults otherwise.
 	 */
-	int		overrun_bit;
-	unsigned int	error_mask;
-
 	int		port_reg;
 	unsigned char	regshift;
 	unsigned char	regtype;
diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h
index fd44983..afe442d 100644
--- a/include/linux/tegra-powergate.h
+++ b/include/linux/tegra-powergate.h
@@ -19,6 +19,7 @@
 #define _MACH_TEGRA_POWERGATE_H_
 
 struct clk;
+struct reset_control;
 
 #define TEGRA_POWERGATE_CPU	0
 #define TEGRA_POWERGATE_3D	1
@@ -52,7 +53,8 @@ int tegra_powergate_power_off(int id);
 int tegra_powergate_remove_clamping(int id);
 
 /* Must be called with clk disabled, and returns with clk enabled */
-int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+int tegra_powergate_sequence_power_up(int id, struct clk *clk,
+				      struct reset_control *rst);
 #else
 static inline int tegra_powergate_is_powered(int id)
 {
@@ -74,7 +76,8 @@ static inline int tegra_powergate_remove_clamping(int id)
 	return -ENOSYS;
 }
 
-static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk,
+						    struct reset_control *rst);
 {
 	return -ENOSYS;
 }