viafb: move some include files to include/linux

These are the files which should be available to subdevices compiled
outside of drivers/video/via.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

1 files changed, 219 insertions, 0 deletions

diff --git a/include/linux/via-core.h b/include/linux/via-core.h
new file mode 100644
index 0000000..7ffb521
--- /dev/null
+++ b/include/linux/via-core.h
@@ -0,0 +1,219 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __VIA_CORE_H__
+#define __VIA_CORE_H__
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+/*
+ * A description of each known serial I2C/GPIO port.
+ */
+enum via_port_type {
+	VIA_PORT_NONE = 0,
+	VIA_PORT_I2C,
+	VIA_PORT_GPIO,
+};
+
+enum via_port_mode {
+	VIA_MODE_OFF = 0,
+	VIA_MODE_I2C,		/* Used as I2C port */
+	VIA_MODE_GPIO,	/* Two GPIO ports */
+};
+
+enum viafb_i2c_adap {
+	VIA_PORT_26 = 0,
+	VIA_PORT_31,
+	VIA_PORT_25,
+	VIA_PORT_2C,
+	VIA_PORT_3D,
+};
+#define VIAFB_NUM_PORTS 5
+
+struct via_port_cfg {
+	enum via_port_type	type;
+	enum via_port_mode	mode;
+	u16			io_port;
+	u8			ioport_index;
+};
+
+/*
+ * This is the global viafb "device" containing stuff needed by
+ * all subdevs.
+ */
+struct viafb_dev {
+	struct pci_dev *pdev;
+	int chip_type;
+	struct via_port_cfg *port_cfg;
+	/*
+	 * Spinlock for access to device registers.  Not yet
+	 * globally used.
+	 */
+	spinlock_t reg_lock;
+	/*
+	 * The framebuffer MMIO region.  Little, if anything, touches
+	 * this memory directly, and certainly nothing outside of the
+	 * framebuffer device itself.  We *do* have to be able to allocate
+	 * chunks of this memory for other devices, though.
+	 */
+	unsigned long fbmem_start;
+	long fbmem_len;
+	void __iomem *fbmem;
+#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
+	long camera_fbmem_offset;
+	long camera_fbmem_size;
+#endif
+	/*
+	 * The MMIO region for device registers.
+	 */
+	unsigned long engine_start;
+	unsigned long engine_len;
+	void __iomem *engine_mmio;
+
+};
+
+/*
+ * Interrupt management.
+ */
+
+void viafb_irq_enable(u32 mask);
+void viafb_irq_disable(u32 mask);
+
+/*
+ * The global interrupt control register and its bits.
+ */
+#define VDE_INTERRUPT	0x200	/* Video interrupt flags/masks */
+#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
+#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
+#define   VDE_I_MCCFI	  0x00000004  /* MCE compl. frame int status */
+#define   VDE_I_VSYNC	  0x00000008  /* VGA VSYNC int status */
+#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
+#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
+#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
+#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
+#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
+#define   VDE_I_HQV0	  0x00000200  /* First HQV engine */
+#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
+#define   VDE_I_HQV1EN	  0x00000800  /* Second HQV engine enable */
+#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
+#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
+#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
+#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
+#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
+#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
+#define   VDE_I_MCCFIEN	  0x00040000  /* MC comp frame int mask enable */
+#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
+#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
+#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
+#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
+#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
+#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
+#define   VDE_I_HQV0EN	  0x02000000  /* First hqv engine enable */
+#define   VDE_I_C1VBIEN	  0x04000000  /* Cap 1 VBI end enable */
+#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
+#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
+#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
+#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
+#define   VDE_I_ENABLE	  0x80000000  /* Global interrupt enable */
+
+/*
+ * DMA management.
+ */
+int viafb_request_dma(void);
+void viafb_release_dma(void);
+/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
+
+/*
+ * DMA Controller registers.
+ */
+#define VDMA_MR0	0xe00		/* Mod reg 0 */
+#define   VDMA_MR_CHAIN   0x01		/* Chaining mode */
+#define   VDMA_MR_TDIE    0x02		/* Transfer done int enable */
+#define VDMA_CSR0	0xe04		/* Control/status */
+#define	  VDMA_C_ENABLE	  0x01		  /* DMA Enable */
+#define	  VDMA_C_START	  0x02		  /* Start a transfer */
+#define	  VDMA_C_ABORT	  0x04		  /* Abort a transfer */
+#define	  VDMA_C_DONE	  0x08		  /* Transfer is done */
+#define VDMA_MARL0	0xe20		/* Mem addr low */
+#define VDMA_MARH0	0xe24		/* Mem addr high */
+#define VDMA_DAR0	0xe28		/* Device address */
+#define VDMA_DQWCR0	0xe2c		/* Count (16-byte) */
+#define VDMA_TMR0	0xe30		/* Tile mode reg */
+#define VDMA_DPRL0	0xe34		/* Not sure */
+#define	  VDMA_DPR_IN	  0x08		/* Inbound transfer to FB */
+#define VDMA_DPRH0	0xe38
+#define VDMA_PMR0	(0xe00 + 0x134) /* Pitch mode */
+
+/*
+ * Useful stuff that probably belongs somewhere global.
+ */
+#define VGA_WIDTH	640
+#define VGA_HEIGHT	480
+
+/*
+ * Indexed port operations.  Note that these are all multi-op
+ * functions; every invocation will be racy if you're not holding
+ * reg_lock.
+ */
+
+#define VIAStatus   0x3DA  /* Non-indexed port */
+#define VIACR       0x3D4
+#define VIASR       0x3C4
+#define VIAGR       0x3CE
+#define VIAAR       0x3C0
+
+static inline u8 via_read_reg(u16 port, u8 index)
+{
+	outb(index, port);
+	return inb(port + 1);
+}
+
+static inline void via_write_reg(u16 port, u8 index, u8 data)
+{
+	outb(index, port);
+	outb(data, port + 1);
+}
+
+static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
+{
+	u8 old;
+
+	outb(index, port);
+	old = inb(port + 1);
+	outb((data & mask) | (old & ~mask), port + 1);
+}
+
+#define VIA_MISC_REG_READ	0x03CC
+#define VIA_MISC_REG_WRITE	0x03C2
+
+static inline void via_write_misc_reg_mask(u8 data, u8 mask)
+{
+	u8 old = inb(VIA_MISC_REG_READ);
+	outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
+}
+
+
+#endif /* __VIA_CORE_H__ */