summaryrefslogtreecommitdiffstats
path: root/include/linux/usb
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-03 12:15:10 -0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-01-03 12:15:10 -0800
commit73ad0adcb69d6a895ff73855ab366a7ae0b2fb0b (patch)
treea66967eb3fe9b6162820c93b5c56221d90c291c8 /include/linux/usb
parent99f14bd4d1b2a1b1b6cd508e08efdbc5e3919198 (diff)
parent836a2164491b19dcd4f29d574e548bcadd421a6a (diff)
downloadop-kernel-dev-73ad0adcb69d6a895ff73855ab366a7ae0b2fb0b.zip
op-kernel-dev-73ad0adcb69d6a895ff73855ab366a7ae0b2fb0b.tar.gz
Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes: usb: changes for v3.14 merge window This pull request is quite extensive, containing 105 non-merge commits. Because of that, we describe the changes in sections below: New drivers: - Keystone PHY driver and DWC3 Glue Layer - Aeroflex Gaisler GRUSBDC - Tahvo PHY driver for N770 - JZ4740 MUSB gluer Layer - Broadcom PHY Driver Important new features: - MUSB DSPS learned about suspend/resume - New quirk_ep_out_aligned_size flag added to struct usb_gadget - DWC3 initializes the new quirk flag so gadget drivers can use it. - AM335x PHY Driver learns about remote wakeup - Renesas USBHS now requests DMA Engine only once - s3c-hsotg is now re-used on Broadcom devices - USB PHY layer now makes sure to initialize the notifier for all drivers - omap-control learned about TI's new AM437x devices - few other usb gadget/function drivers learned about the new configfs-based binding. Misc Fixes and Clean Ups: - Several sparse fixes all over the place - Removal of redundant of_match_ptr() - r-car gen2 phy now uses usb_add_phy_dev() - removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers - conversion to clk_prepare/clk_unprepare on r8a66597-udc - some randconfig errors and build warnings were fixed - removal of unnecessary lock on dwc3-omap.c Signed-of-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'include/linux/usb')
-rw-r--r--include/linux/usb/composite.h2
-rw-r--r--include/linux/usb/functionfs.h30
-rw-r--r--include/linux/usb/gadget.h58
-rw-r--r--include/linux/usb/musb.h3
-rw-r--r--include/linux/usb/omap_control_usb.h6
-rw-r--r--include/linux/usb/otg-fsm.h244
6 files changed, 304 insertions, 39 deletions
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 5e61589..dba63f5 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -468,6 +468,8 @@ struct usb_function_instance {
struct config_group group;
struct list_head cfs_list;
struct usb_function_driver *fd;
+ int (*set_inst_name)(struct usb_function_instance *inst,
+ const char *name);
void (*free_func_inst)(struct usb_function_instance *inst);
};
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 65d0a88..7119066 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -3,34 +3,4 @@
#include <uapi/linux/usb/functionfs.h>
-
-struct ffs_data;
-struct usb_composite_dev;
-struct usb_configuration;
-
-
-static int functionfs_init(void) __attribute__((warn_unused_result));
-static void functionfs_cleanup(void);
-
-static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
- __attribute__((warn_unused_result, nonnull));
-static void functionfs_unbind(struct ffs_data *ffs)
- __attribute__((nonnull));
-
-static int functionfs_bind_config(struct usb_composite_dev *cdev,
- struct usb_configuration *c,
- struct ffs_data *ffs)
- __attribute__((warn_unused_result, nonnull));
-
-
-static int functionfs_ready_callback(struct ffs_data *ffs)
- __attribute__((warn_unused_result, nonnull));
-static void functionfs_closed_callback(struct ffs_data *ffs)
- __attribute__((nonnull));
-static void *functionfs_acquire_dev_callback(const char *dev_name)
- __attribute__((warn_unused_result, nonnull));
-static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
- __attribute__((nonnull));
-
-
#endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 942ef5e..c3a6185 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -148,6 +148,9 @@ struct usb_ep_ops {
* @maxpacket:The maximum packet size used on this endpoint. The initial
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
+ * @maxpacket_limit:The maximum packet size value which can be handled by this
+ * endpoint. It's set once by UDC driver when endpoint is initialized, and
+ * should not be changed. Should not be confused with maxpacket.
* @max_streams: The maximum number of streams supported
* by this EP (0 - 16, actual number is 2^n)
* @mult: multiplier, 'mult' value for SS Isoc EPs
@@ -171,6 +174,7 @@ struct usb_ep {
const struct usb_ep_ops *ops;
struct list_head ep_list;
unsigned maxpacket:16;
+ unsigned maxpacket_limit:16;
unsigned max_streams:16;
unsigned mult:2;
unsigned maxburst:5;
@@ -182,6 +186,21 @@ struct usb_ep {
/*-------------------------------------------------------------------------*/
/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function shoud be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+ unsigned maxpacket_limit)
+{
+ ep->maxpacket_limit = maxpacket_limit;
+ ep->maxpacket = maxpacket_limit;
+}
+
+/**
* usb_ep_enable - configure endpoint, making it usable
* @ep:the endpoint being configured. may not be the endpoint named "ep0".
* drivers discover endpoints through the ep_list of a usb_gadget.
@@ -485,6 +504,11 @@ struct usb_gadget_ops {
* @max_speed: Maximal speed the UDC can handle. UDC must support this
* and all slower speeds.
* @state: the state we are now (attached, suspended, configured, etc)
+ * @name: Identifies the controller hardware type. Used in diagnostics
+ * and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ * @out_epnum: last used out ep number
+ * @in_epnum: last used in ep number
* @sg_supported: true if we can handle scatter-gather
* @is_otg: True if the USB device port uses a Mini-AB jack, so that the
* gadget driver must provide a USB OTG descriptor.
@@ -497,11 +521,8 @@ struct usb_gadget_ops {
* only supports HNP on a different root port.
* @b_hnp_enable: OTG device feature flag, indicating that the A-Host
* enabled HNP support.
- * @name: Identifies the controller hardware type. Used in diagnostics
- * and sometimes configuration.
- * @dev: Driver model state for this abstract device.
- * @out_epnum: last used out ep number
- * @in_epnum: last used in ep number
+ * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
+ * MaxPacketSize.
*
* Gadgets have a mostly-portable "gadget driver" implementing device
* functions, handling all usb configurations and interfaces. Gadget
@@ -530,16 +551,18 @@ struct usb_gadget {
enum usb_device_speed speed;
enum usb_device_speed max_speed;
enum usb_device_state state;
+ const char *name;
+ struct device dev;
+ unsigned out_epnum;
+ unsigned in_epnum;
+
unsigned sg_supported:1;
unsigned is_otg:1;
unsigned is_a_peripheral:1;
unsigned b_hnp_enable:1;
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
- const char *name;
- struct device dev;
- unsigned out_epnum;
- unsigned in_epnum;
+ unsigned quirk_ep_out_aligned_size:1;
};
#define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
@@ -558,6 +581,23 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
/**
+ * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
+ * requires quirk_ep_out_aligned_size, otherwise reguens len.
+ * @g: controller to check for quirk
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used in case it's required for any reason to check and maybe
+ * align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t
+usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
+{
+ return !g->quirk_ep_out_aligned_size ? len :
+ round_up(len, (size_t)ep->desc->wMaxPacketSize);
+}
+
+/**
* gadget_is_dualspeed - return true iff the hardware handles high speed
* @g: controller that might support both high and full speeds
*/
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb50525..a4ee1b5 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -76,6 +76,9 @@ struct musb_hdrc_config {
unsigned dma:1 __deprecated; /* supports DMA */
unsigned vendor_req:1 __deprecated; /* vendor registers required */
+ /* need to explicitly de-assert the port reset after resume? */
+ unsigned host_port_deassert_reset_at_resume:1;
+
u8 num_eps; /* number of endpoints _with_ ep0 */
u8 dma_channels __deprecated; /* number of dma channels */
u8 dyn_fifo_size; /* dynamic size in bytes */
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 596b019..69ae383 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -24,6 +24,7 @@ enum omap_control_usb_type {
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+ OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
};
struct omap_control_usb {
@@ -64,6 +65,11 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
+#define AM437X_CTRL_USB2_PHY_PD BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
+
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
extern void omap_control_usb_phy_power(struct device *dev, int on);
extern void omap_control_usb_set_mode(struct device *dev,
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
new file mode 100644
index 0000000..b6ba1bf
--- /dev/null
+++ b/include/linux/usb/otg-fsm.h
@@ -0,0 +1,244 @@
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_OTG_FSM_H
+#define __LINUX_USB_OTG_FSM_H
+
+#include <linux/mutex.h>
+#include <linux/errno.h>
+
+#undef VERBOSE
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s] " fmt , \
+ __func__, ## args)
+#else
+#define VDBG(stuff...) do {} while (0)
+#endif
+
+#ifdef VERBOSE
+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
+#else
+#define MPC_LOC do {} while (0)
+#endif
+
+#define PROTO_UNDEF (0)
+#define PROTO_HOST (1)
+#define PROTO_GADGET (2)
+
+enum otg_fsm_timer {
+ /* Standard OTG timers */
+ A_WAIT_VRISE,
+ A_WAIT_VFALL,
+ A_WAIT_BCON,
+ A_AIDL_BDIS,
+ B_ASE0_BRST,
+ A_BIDL_ADIS,
+
+ /* Auxiliary timers */
+ B_SE0_SRP,
+ B_SRP_FAIL,
+ A_WAIT_ENUM,
+
+ NUM_OTG_FSM_TIMERS,
+};
+
+/* OTG state machine according to the OTG spec */
+struct otg_fsm {
+ /* Input */
+ int id;
+ int adp_change;
+ int power_up;
+ int test_device;
+ int a_bus_drop;
+ int a_bus_req;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_conn;
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int b_bus_req;
+ int b_se0_srp;
+ int b_ssend_srp;
+ int b_sess_vld;
+ /* Auxilary inputs */
+ int a_sess_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+
+ /* Output */
+ int data_pulse;
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+ int adp_prb;
+ int adp_sns;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+ int a_clr_err;
+
+ /* Informative variables */
+ int a_bus_drop_inf;
+ int a_bus_req_inf;
+ int a_clr_err_inf;
+ int b_bus_req_inf;
+ /* Auxilary informative variables */
+ int a_suspend_req_inf;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_vfall_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int b_ase0_brst_tmout;
+ int a_bidl_adis_tmout;
+
+ struct otg_fsm_ops *ops;
+ struct usb_otg *otg;
+
+ /* Current usb protocol used: 0:undefine; 1:host; 2:client */
+ int protocol;
+ struct mutex lock;
+};
+
+struct otg_fsm_ops {
+ void (*chrg_vbus)(struct otg_fsm *fsm, int on);
+ void (*drv_vbus)(struct otg_fsm *fsm, int on);
+ void (*loc_conn)(struct otg_fsm *fsm, int on);
+ void (*loc_sof)(struct otg_fsm *fsm, int on);
+ void (*start_pulse)(struct otg_fsm *fsm);
+ void (*start_adp_prb)(struct otg_fsm *fsm);
+ void (*start_adp_sns)(struct otg_fsm *fsm);
+ void (*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+ void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+ int (*start_host)(struct otg_fsm *fsm, int on);
+ int (*start_gadget)(struct otg_fsm *fsm, int on);
+};
+
+
+static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->chrg_vbus)
+ return -EOPNOTSUPP;
+ fsm->ops->chrg_vbus(fsm, on);
+ return 0;
+}
+
+static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->drv_vbus)
+ return -EOPNOTSUPP;
+ if (fsm->drv_vbus != on) {
+ fsm->drv_vbus = on;
+ fsm->ops->drv_vbus(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->loc_conn)
+ return -EOPNOTSUPP;
+ if (fsm->loc_conn != on) {
+ fsm->loc_conn = on;
+ fsm->ops->loc_conn(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->loc_sof)
+ return -EOPNOTSUPP;
+ if (fsm->loc_sof != on) {
+ fsm->loc_sof = on;
+ fsm->ops->loc_sof(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_start_pulse(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_pulse)
+ return -EOPNOTSUPP;
+ if (!fsm->data_pulse) {
+ fsm->data_pulse = 1;
+ fsm->ops->start_pulse(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_start_adp_prb(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_adp_prb)
+ return -EOPNOTSUPP;
+ if (!fsm->adp_prb) {
+ fsm->adp_sns = 0;
+ fsm->adp_prb = 1;
+ fsm->ops->start_adp_prb(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_start_adp_sns(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_adp_sns)
+ return -EOPNOTSUPP;
+ if (!fsm->adp_sns) {
+ fsm->adp_sns = 1;
+ fsm->ops->start_adp_sns(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+ if (!fsm->ops->add_timer)
+ return -EOPNOTSUPP;
+ fsm->ops->add_timer(fsm, timer);
+ return 0;
+}
+
+static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+ if (!fsm->ops->del_timer)
+ return -EOPNOTSUPP;
+ fsm->ops->del_timer(fsm, timer);
+ return 0;
+}
+
+static inline int otg_start_host(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->start_host)
+ return -EOPNOTSUPP;
+ return fsm->ops->start_host(fsm, on);
+}
+
+static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->start_gadget)
+ return -EOPNOTSUPP;
+ return fsm->ops->start_gadget(fsm, on);
+}
+
+int otg_statemachine(struct otg_fsm *fsm);
+
+#endif /* __LINUX_USB_OTG_FSM_H */
OpenPOWER on IntegriCloud