[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>

This moves header files for controller-specific platform data
from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing
some clutter.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 55 insertions, 0 deletions

diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
new file mode 100644
index 0000000..436dd8a
--- /dev/null
+++ b/include/linux/usb/isp116x.h
@@ -0,0 +1,29 @@
+
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+struct isp116x_platform_data {
+	/* Enable internal resistors on downstream ports */
+	unsigned sel15Kres:1;
+	/* On-chip overcurrent detection */
+	unsigned oc_enable:1;
+	/* INT output polarity */
+	unsigned int_act_high:1;
+	/* INT edge or level triggered */
+	unsigned int_edge_triggered:1;
+	/* Enable wakeup by devices on usb bus (e.g. wakeup
+	   by attachment/detachment or by device activity
+	   such as moving a mouse). When chosen, this option
+	   prevents stopping internal clock, increasing
+	   thereby power consumption in suspended state. */
+	unsigned remote_wakeup_enable:1;
+	/* Inter-io delay (ns). The chip is picky about access timings; it
+	   expects at least:
+	   150ns delay between consecutive accesses to DATA_REG,
+	   300ns delay between access to ADDR_REG and DATA_REG
+	   OE, WE MUST NOT be changed during these intervals
+	 */
+	void (*delay) (struct device * dev, int delay);
+};
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
new file mode 100644
index 0000000..397ee3b
--- /dev/null
+++ b/include/linux/usb/sl811.h
@@ -0,0 +1,26 @@
+
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+struct sl811_platform_data {
+	unsigned	can_wakeup:1;
+
+	/* given port_power, msec/2 after power on till power good */
+	u8		potpg;
+
+	/* mA/2 power supplied on this port (max = default = 250) */
+	u8		power;
+
+	/* sl811 relies on an external source of VBUS current */
+	void		(*port_power)(struct device *dev, int is_on);
+
+	/* pulse sl811 nRST (probably with a GPIO) */
+	void		(*reset)(struct device *dev);
+
+	// some boards need something like these:
+	// int		(*check_overcurrent)(struct device *dev);
+	// void		(*clock_enable)(struct device *dev, int is_on);
+};
+