phy: rename struct omap_control_usb to struct omap_control_phy

Rename struct omap_control_usb to struct omap_control_phy since it can
be used to control PHY of USB, SATA and PCIE. Also move the driver and
include files under *phy* and made the corresponding changes in the users
of phy-omap-control.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>

1 files changed, 0 insertions, 89 deletions

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
deleted file mode 100644
index 69ae383..0000000
--- a/include/linux/usb/omap_control_usb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * omap_control_usb.h - Header file for the USB part of control module.
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __OMAP_CONTROL_USB_H__
-#define __OMAP_CONTROL_USB_H__
-
-enum omap_control_usb_type {
-	OMAP_CTRL_TYPE_OTGHS = 1,	/* Mailbox OTGHS_CONTROL */
-	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
-	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
-	OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
-	OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
-};
-
-struct omap_control_usb {
-	struct device *dev;
-
-	u32 __iomem *otghs_control;
-	u32 __iomem *power;
-	u32 __iomem *power_aux;
-
-	struct clk *sys_clk;
-
-	enum omap_control_usb_type type;
-};
-
-enum omap_control_usb_mode {
-	USB_MODE_UNDEFINED = 0,
-	USB_MODE_HOST,
-	USB_MODE_DEVICE,
-	USB_MODE_DISCONNECT,
-};
-
-#define	OMAP_CTRL_DEV_PHY_PD		BIT(0)
-
-#define	OMAP_CTRL_DEV_AVALID		BIT(0)
-#define	OMAP_CTRL_DEV_BVALID		BIT(1)
-#define	OMAP_CTRL_DEV_VBUSVALID		BIT(2)
-#define	OMAP_CTRL_DEV_SESSEND		BIT(3)
-#define	OMAP_CTRL_DEV_IDDIG		BIT(4)
-
-#define	OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK	0x003FC000
-#define	OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT	0xE
-
-#define	OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK	0xFFC00000
-#define	OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT	0x16
-
-#define	OMAP_CTRL_USB3_PHY_TX_RX_POWERON	0x3
-#define	OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF	0x0
-
-#define OMAP_CTRL_USB2_PHY_PD		BIT(28)
-
-#define AM437X_CTRL_USB2_PHY_PD		BIT(0)
-#define AM437X_CTRL_USB2_OTG_PD		BIT(1)
-#define AM437X_CTRL_USB2_OTGVDET_EN	BIT(19)
-#define AM437X_CTRL_USB2_OTGSESSEND_EN	BIT(20)
-
-#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb_set_mode(struct device *dev,
-	enum omap_control_usb_mode mode);
-#else
-
-static inline void omap_control_usb_phy_power(struct device *dev, int on)
-{
-}
-
-static inline void omap_control_usb_set_mode(struct device *dev,
-	enum omap_control_usb_mode mode)
-{
-}
-#endif
-
-#endif	/* __OMAP_CONTROL_USB_H__ */