UAPI: (Scripted) Disintegrate include/linux/usb

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 1 insertions, 959 deletions

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index d1d732c..9c210f2 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -29,887 +29,11 @@
  *     someone that the two other points are non-issues for that
  *     particular descriptor type.
  */
-
 #ifndef __LINUX_USB_CH9_H
 #define __LINUX_USB_CH9_H
 
-#include <linux/types.h>	/* __u8 etc */
-#include <asm/byteorder.h>	/* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT			0		/* to device */
-#define USB_DIR_IN			0x80		/* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK			(0x03 << 5)
-#define USB_TYPE_STANDARD		(0x00 << 5)
-#define USB_TYPE_CLASS			(0x01 << 5)
-#define USB_TYPE_VENDOR			(0x02 << 5)
-#define USB_TYPE_RESERVED		(0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK			0x1f
-#define USB_RECIP_DEVICE		0x00
-#define USB_RECIP_INTERFACE		0x01
-#define USB_RECIP_ENDPOINT		0x02
-#define USB_RECIP_OTHER			0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT			0x04
-#define USB_RECIP_RPIPE		0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS		0x00
-#define USB_REQ_CLEAR_FEATURE		0x01
-#define USB_REQ_SET_FEATURE		0x03
-#define USB_REQ_SET_ADDRESS		0x05
-#define USB_REQ_GET_DESCRIPTOR		0x06
-#define USB_REQ_SET_DESCRIPTOR		0x07
-#define USB_REQ_GET_CONFIGURATION	0x08
-#define USB_REQ_SET_CONFIGURATION	0x09
-#define USB_REQ_GET_INTERFACE		0x0A
-#define USB_REQ_SET_INTERFACE		0x0B
-#define USB_REQ_SYNCH_FRAME		0x0C
-#define USB_REQ_SET_SEL			0x30
-#define USB_REQ_SET_ISOCH_DELAY		0x31
-
-#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION		0x0E
-#define USB_REQ_RPIPE_ABORT		0x0E
-#define USB_REQ_SET_HANDSHAKE		0x0F
-#define USB_REQ_RPIPE_RESET		0x0F
-#define USB_REQ_GET_HANDSHAKE		0x10
-#define USB_REQ_SET_CONNECTION		0x11
-#define USB_REQ_SET_SECURITY_DATA	0x12
-#define USB_REQ_GET_SECURITY_DATA	0x13
-#define USB_REQ_SET_WUSB_DATA		0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
-#define USB_REQ_LOOPBACK_DATA_READ	0x16
-#define USB_REQ_SET_INTERFACE_DS	0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)  Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
-#define USB_DEVICE_BATTERY		2	/* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define	TEST_J		1
-#define	TEST_K		2
-#define	TEST_SE0_NAK	3
-#define	TEST_PACKET	4
-#define	TEST_FORCE_EN	5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-6
- */
-#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
-/*
- * Suspend Options, Table 9-7 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
-
-#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device.  It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__le16 wValue;
-	__le16 wIndex;
-	__le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE			0x01
-#define USB_DT_CONFIG			0x02
-#define USB_DT_STRING			0x03
-#define USB_DT_INTERFACE		0x04
-#define USB_DT_ENDPOINT			0x05
-#define USB_DT_DEVICE_QUALIFIER		0x06
-#define USB_DT_OTHER_SPEED_CONFIG	0x07
-#define USB_DT_INTERFACE_POWER		0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG			0x09
-#define USB_DT_DEBUG			0x0a
-#define USB_DT_INTERFACE_ASSOCIATION	0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY			0x0c
-#define USB_DT_KEY			0x0d
-#define USB_DT_ENCRYPTION_TYPE		0x0e
-#define USB_DT_BOS			0x0f
-#define USB_DT_DEVICE_CAPABILITY	0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
-#define USB_DT_WIRE_ADAPTER		0x21
-#define USB_DT_RPIPE			0x22
-#define USB_DT_CS_RADIO_CONTROL		0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE		0x24
-/* From the USB 3.0 spec */
-#define	USB_DT_SS_ENDPOINT_COMP		0x30
-
-/* Conventional codes for class-specific descriptors.  The convention is
- * defined in the USB "Common Class" Spec (3.11).  Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__le16 idVendor;
-	__le16 idProduct;
-	__le16 bcdDevice;
-	__u8  iManufacturer;
-	__u8  iProduct;
-	__u8  iSerialNumber;
-	__u8  bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE		18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
-#define USB_CLASS_AUDIO			1
-#define USB_CLASS_COMM			2
-#define USB_CLASS_HID			3
-#define USB_CLASS_PHYSICAL		5
-#define USB_CLASS_STILL_IMAGE		6
-#define USB_CLASS_PRINTER		7
-#define USB_CLASS_MASS_STORAGE		8
-#define USB_CLASS_HUB			9
-#define USB_CLASS_CDC_DATA		0x0a
-#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
-#define USB_CLASS_VIDEO			0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
-#define USB_CLASS_MISC			0xef
-#define USB_CLASS_APP_SPEC		0xfe
-#define USB_CLASS_VENDOR_SPEC		0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC	0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different.  Highspeed-capable devices can look
- * different depending on what speed they're currently running.  Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumInterfaces;
-	__u8  bConfigurationValue;
-	__u8  iConfiguration;
-	__u8  bmAttributes;
-	__u8  bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE		9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
-#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
-#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
-#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wData[1];		/* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bInterfaceNumber;
-	__u8  bAlternateSetting;
-	__u8  bNumEndpoints;
-	__u8  bInterfaceClass;
-	__u8  bInterfaceSubClass;
-	__u8  bInterfaceProtocol;
-	__u8  iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE		9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEndpointAddress;
-	__u8  bmAttributes;
-	__le16 wMaxPacketSize;
-	__u8  bInterval;
-
-	/* NOTE:  these two are _only_ in audio endpoints. */
-	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
-	__u8  bRefresh;
-	__u8  bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE		7
-#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK		0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL	0
-#define USB_ENDPOINT_XFER_ISOC		1
-#define USB_ENDPOINT_XFER_BULK		2
-#define USB_ENDPOINT_XFER_INT		3
-#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
-
-/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
-#define USB_ENDPOINT_INTRTYPE		0x30
-#define USB_ENDPOINT_INTR_PERIODIC	(0 << 4)
-#define USB_ENDPOINT_INTR_NOTIFICATION	(1 << 4)
-
-#define USB_ENDPOINT_SYNCTYPE		0x0c
-#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK		0x30
-#define USB_ENDPOINT_USAGE_DATA		0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
-	return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-static inline int usb_endpoint_interrupt_type(
-		const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bmAttributes;
-	__le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE		6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
-	int		max_streams;
-
-	if (!comp)
-		return 0;
-
-	max_streams = comp->bmAttributes & 0x1f;
-
-	if (!max_streams)
-		return 0;
-
-	max_streams = 1 << max_streams;
-
-	return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__u8  bNumConfigurations;
-	__u8  bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bmAttributes;	/* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP		(1 << 0)
-#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	/* bulk endpoints with 8 byte maxpacket */
-	__u8  bDebugInEndpoint;
-	__u8  bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bFirstInterface;
-	__u8  bInterfaceCount;
-	__u8  bFunctionClass;
-	__u8  bFunctionSubClass;
-	__u8  bFunctionProtocol;
-	__u8  iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY:  group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  tTKID[3];
-	__u8  bReserved;
-	__u8  bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEncryptionType;
-#define	USB_ENC_TYPE_UNSECURE		0
-#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
-#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
-#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
-	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
-	__u8  bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS:  group of device-level capabilities */
-struct usb_bos_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE		5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
-struct usb_dev_cap_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-} __attribute__((packed));
-
-#define	USB_CAP_TYPE_WIRELESS_USB	1
-
-struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-
-	__u8  bmAttributes;
-#define	USB_WIRELESS_P2P_DRD		(1 << 1)
-#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
-#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
-#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
-#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
-	__le16 wPHYRates;	/* bit rates, Mbps */
-#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
-#define	USB_WIRELESS_PHY_80		(1 << 1)
-#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
-#define	USB_WIRELESS_PHY_160		(1 << 3)
-#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
-#define	USB_WIRELESS_PHY_320		(1 << 5)
-#define	USB_WIRELESS_PHY_400		(1 << 6)
-#define	USB_WIRELESS_PHY_480		(1 << 7)
-	__u8  bmTFITXPowerInfo;	/* TFI power levels */
-	__u8  bmFFITXPowerInfo;	/* FFI power levels */
-	__le16 bmBandGroup;
-	__u8  bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define	USB_CAP_TYPE_EXT		2
-
-struct usb_ext_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__le32 bmAttributes;
-#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
-#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
-#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE	7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define		USB_SS_CAP_TYPE		3
-struct usb_ss_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bmAttributes;
-#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
-	__le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
-	__u8  bFunctionalitySupport;
-	__u8  bU1devExitLat;
-	__le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE	10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define	CONTAINER_ID_TYPE	4
-struct usb_ss_container_id_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bReserved;
-	__u8  ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE	20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bMaxSequence;
-	__le16 wMaxStreamDelay;
-	__le16 wOverTheAirPacketSize;
-	__u8  bOverTheAirInterval;
-	__u8  bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO		0
-#define USB_ENDPOINT_SWITCH_SWITCH	1
-#define USB_ENDPOINT_SWITCH_SCALE	2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys.  The handshake depends on a CC.
- */
-struct usb_handshake {
-	__u8 bMessageNumber;
-	__u8 bStatus;
-	__u8 tTKID[3];
-	__u8 bReserved;
-	__u8 CDID[16];
-	__u8 nonce[16];
-	__u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
-	__u8 CHID[16];		/* persistent host id */
-	__u8 CDID[16];		/* device id (unique w/in host context) */
-	__u8 CK[16];		/* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
+#include <uapi/linux/usb/ch9.h>
 
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
-	USB_SPEED_UNKNOWN = 0,			/* enumerating */
-	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
-	USB_SPEED_HIGH,				/* usb 2.0 */
-	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
-	USB_SPEED_SUPER,			/* usb 3.0 */
-};
-
-#ifdef __KERNEL__
 
 /**
  * usb_speed_string() - Returns human readable-name of the speed.
@@ -919,86 +43,4 @@ enum usb_device_speed {
  */
 extern const char *usb_speed_string(enum usb_device_speed speed);
 
-#endif
-
-enum usb_device_state {
-	/* NOTATTACHED isn't in the USB spec, and this state acts
-	 * the same as ATTACHED ... but it's clearer this way.
-	 */
-	USB_STATE_NOTATTACHED = 0,
-
-	/* chapter 9 and authentication (wireless) device states */
-	USB_STATE_ATTACHED,
-	USB_STATE_POWERED,			/* wired */
-	USB_STATE_RECONNECTING,			/* auth */
-	USB_STATE_UNAUTHENTICATED,		/* auth */
-	USB_STATE_DEFAULT,			/* limited function */
-	USB_STATE_ADDRESS,
-	USB_STATE_CONFIGURED,			/* most functions */
-
-	USB_STATE_SUSPENDED
-
-	/* NOTE:  there are actually four different SUSPENDED
-	 * states, returning to POWERED, DEFAULT, ADDRESS, or
-	 * CONFIGURED respectively when SOF tokens flow again.
-	 * At this level there's no difference between L1 and L2
-	 * suspend states.  (L2 being original USB 1.1 suspend.)
-	 */
-};
-
-enum usb3_link_state {
-	USB3_LPM_U0 = 0,
-	USB3_LPM_U1,
-	USB3_LPM_U2,
-	USB3_LPM_U3
-};
-
-/*
- * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
- * 0xff means the parent hub will accept transitions to U1, but will not
- * initiate a transition.
- *
- * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
- * U1 after that many microseconds.  Timeouts of 0x80 to 0xFE are reserved
- * values.
- *
- * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
- * 0xff means the parent hub will accept transitions to U2, but will not
- * initiate a transition.
- *
- * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
- * U2 after N*256 microseconds.  Therefore a U2 timeout value of 0x1 means a U2
- * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
- * 65.024ms.
- */
-#define USB3_LPM_DISABLED		0x0
-#define USB3_LPM_U1_MAX_TIMEOUT		0x7F
-#define USB3_LPM_U2_MAX_TIMEOUT		0xFE
-#define USB3_LPM_DEVICE_INITIATED	0xFF
-
-struct usb_set_sel_req {
-	__u8	u1_sel;
-	__u8	u1_pel;
-	__le16	u2_sel;
-	__le16	u2_pel;
-} __attribute__ ((packed));
-
-/*
- * The Set System Exit Latency control transfer provides one byte each for
- * U1 SEL and U1 PEL, so the max exit latency is 0xFF.  U2 SEL and U2 PEL each
- * are two bytes long.
- */
-#define USB3_LPM_MAX_U1_SEL_PEL		0xFF
-#define USB3_LPM_MAX_U2_SEL_PEL		0xFFFF
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW		100
-
 #endif /* __LINUX_USB_CH9_H */