summaryrefslogtreecommitdiffstats
path: root/include/linux/usb.h
diff options
context:
space:
mode:
authorDavid Laight <David.Laight@ACULAB.COM>2013-11-11 12:26:54 +0000
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2013-12-02 11:57:10 -0800
commit35773dac5f862cb1c82ea151eba3e2f6de51ec3e (patch)
treeee95416c3efb1f75ab4bd43ed2560a23c97739d3 /include/linux/usb.h
parentc24cb6c8b501ebdf1aacec7960110a9741a45ced (diff)
downloadop-kernel-dev-35773dac5f862cb1c82ea151eba3e2f6de51ec3e.zip
op-kernel-dev-35773dac5f862cb1c82ea151eba3e2f6de51ec3e.tar.gz
usb: xhci: Link TRB must not occur within a USB payload burst
Section 4.11.7.1 of rev 1.0 of the xhci specification states that a link TRB can only occur at a boundary between underlying USB frames (512 bytes for high speed devices). If this isn't done the USB frames aren't formatted correctly and, for example, the USB3 ethernet ax88179_178a card will stop sending (while still receiving) when running a netperf tcp transmit test with (say) and 8k buffer. This should be a candidate for stable, the ax88179_178a driver defaults to gso and tso enabled so it passes a lot of fragmented skb to the USB stack. Notes from Sarah: Discussion: http://marc.info/?l=linux-usb&m=138384509604981&w=2 This patch fixes a long-standing xHCI driver bug that was revealed by a change in 3.12 in the usb-net driver. Commit 638c5115a794981441246fa8fa5d95c1875af5ba "USBNET: support DMA SG" added support to use bulk endpoint scatter-gather (urb->sg). Only the USB ethernet drivers trigger this bug, because the mass storage driver sends sg list entries in page-sized chunks. This patch only fixes the issue for bulk endpoint scatter-gather. The problem will still occur for periodic endpoints, because hosts will interpret no-op transfers as a request to skip a service interval, which is not what we want. Luckily, the USB core isn't set up for scatter-gather on isochronous endpoints, and no USB drivers use scatter-gather for interrupt endpoints. Document this known limitation so that developers won't try to use urb->sg for interrupt endpoints until this issue is fixed. The more comprehensive fix would be to allow link TRBs in the middle of the endpoint ring and revert this patch, but that fix would touch too much code to be allowed in for stable. This patch should be backported to kernels as old as 3.12, that contain the commit 638c5115a794981441246fa8fa5d95c1875af5ba "USBNET: support DMA SG". Without this patch, the USB network device gets wedged, and stops sending packets. Mark Lord confirms this patch fixes the regression: http://marc.info/?l=linux-netdev&m=138487107625966&w=2 Signed-off-by: David Laight <david.laight@aculab.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Mark Lord <mlord@pobox.com> Cc: stable@vger.kernel.org
Diffstat (limited to 'include/linux/usb.h')
-rw-r--r--include/linux/usb.h2
1 files changed, 2 insertions, 0 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 7454865..512ab16 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1264,6 +1264,8 @@ typedef void (*usb_complete_t)(struct urb *);
* @sg: scatter gather buffer list, the buffer size of each element in
* the list (except the last) must be divisible by the endpoint's
* max packet size if no_sg_constraint isn't set in 'struct usb_bus'
+ * (FIXME: scatter-gather under xHCI is broken for periodic transfers.
+ * Do not use urb->sg for interrupt endpoints for now, only bulk.)
* @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
OpenPOWER on IntegriCloud