ssb: Fix extraction of values from SPROM

This fixes extraction of some values from the SPROM.
It mainly fixes extraction of antenna related values, which
is needed for another b43 fix sent later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

2 files changed, 41 insertions, 16 deletions

diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index a21ab29..0eaa984 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -22,7 +22,12 @@ struct ssb_sprom {
 	u8 et1mac[6];		/* MAC address for 802.11a */
 	u8 et0phyaddr;		/* MII address for enet0 */
 	u8 et1phyaddr;		/* MII address for enet1 */
+	u8 et0mdcport;		/* MDIO for enet0 */
+	u8 et1mdcport;		/* MDIO for enet1 */
+	u8 board_rev;		/* Board revision number from SPROM. */
 	u8 country_code;	/* Country Code */
+	u8 ant_available_a;	/* A-PHY antenna available bits (up to 4) */
+	u8 ant_available_bg;	/* B/G-PHY antenna available bits (up to 4) */
 	u16 pa0b0;
 	u16 pa0b1;
 	u16 pa0b2;
@@ -38,8 +43,18 @@ struct ssb_sprom {
 	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
 	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
 	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
-	u8 antenna_gain_a;	/* A-PHY Antenna gain (in dBm Q5.2) */
-	u8 antenna_gain_bg;	/* B/G-PHY Antenna gain (in dBm Q5.2) */
+
+	/* Antenna gain values for up to 4 antennas
+	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+	 * loss in the connectors is bigger than the gain. */
+	struct {
+		struct {
+			s8 a0, a1, a2, a3;
+		} ghz24;	/* 2.4GHz band */
+		struct {
+			s8 a0, a1, a2, a3;
+		} ghz5;		/* 5GHz band */
+	} antenna_gain;
 
 	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
 };
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 30222e8..ebad0ba 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -193,10 +193,10 @@
 #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
 #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
 #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
-#define  SSB_SPROM1_BINF_ANTA		0x3000	/* Available A-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTA_SHIFT	12
-#define  SSB_SPROM1_BINF_ANTBG		0xC000	/* Available B-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTBG_SHIFT	14
+#define  SSB_SPROM1_BINF_ANTBG		0x3000	/* Available B-PHY and G-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+#define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+#define  SSB_SPROM1_BINF_ANTA_SHIFT	14
 #define SSB_SPROM1_PA0B0		0x105E
 #define SSB_SPROM1_PA0B1		0x1060
 #define SSB_SPROM1_PA0B2		0x1062
@@ -221,9 +221,10 @@
 #define  SSB_SPROM1_ITSSI_A_SHIFT	8
 #define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
 #define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM1_AGAIN_A		0x00FF	/* A-PHY */
-#define  SSB_SPROM1_AGAIN_BG		0xFF00	/* B-PHY and G-PHY */
-#define  SSB_SPROM1_AGAIN_BG_SHIFT	8
+#define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+#define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+#define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+#define  SSB_SPROM1_AGAIN_A_SHIFT	8
 
 /* SPROM Revision 2 (inherits from rev 1) */
 #define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
@@ -264,7 +265,7 @@
 #define  SSB_SPROM3_CCKPO_11M_SHIFT	12
 #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
 
-/* SPROM Revision 4 		entries with ?? in comment are unknown */
+/* SPROM Revision 4 */
 #define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
 #define SSB_SPROM4_ET0MAC		0x1018	/* 6 bytes MAC address for Ethernet ?? */
 #define SSB_SPROM4_ET1MAC		0x1018	/* 6 bytes MAC address for 802.11a ?? */
@@ -275,13 +276,22 @@
 #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
 #define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
-#define SSB_SPROM4_ANT_A		0x105D  /* A Antennas */
-#define SSB_SPROM4_ANT_BG		0x105C  /* B/G Antennas */
+#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
 #define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN		0x105E	/* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM4_AGAIN_0		0x00FF	/* Antenna 0 */
-#define  SSB_SPROM4_AGAIN_1		0xFF00	/* Antenna 1 */
-#define  SSB_SPROM4_AGAIN_1_SHIFT	8
+#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
+#define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+#define  SSB_SPROM4_AGAIN0_SHIFT	0
+#define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+#define  SSB_SPROM4_AGAIN1_SHIFT	8
+#define SSB_SPROM4_AGAIN23		0x1060
+#define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+#define  SSB_SPROM4_AGAIN2_SHIFT	0
+#define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+#define  SSB_SPROM4_AGAIN3_SHIFT	8
 #define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
 #define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
 #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */