summaryrefslogtreecommitdiffstats
path: root/include/linux/ssb
diff options
context:
space:
mode:
authorMichael Buesch <mb@bu3sch.de>2008-02-29 11:36:12 +0100
committerJohn W. Linville <linville@tuxdriver.com>2008-03-06 17:09:43 -0500
commitaab547ce0d1493d400b6468c521a0137cd8c1edf (patch)
tree84625da40d905669a28a5770de111225667d5f27 /include/linux/ssb
parent69d3b6f491545d326135a1def4e290cd577c9a36 (diff)
downloadop-kernel-dev-aab547ce0d1493d400b6468c521a0137cd8c1edf.zip
op-kernel-dev-aab547ce0d1493d400b6468c521a0137cd8c1edf.tar.gz
ssb: Add Gigabit Ethernet driver
This adds the Gigabit Ethernet driver for the SSB Gigabit Ethernet core. This driver actually is a frontend to the Tigon3 driver. So the real work is done by tg3. This device is used in the Linksys WRT350N. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'include/linux/ssb')
-rw-r--r--include/linux/ssb/ssb.h7
-rw-r--r--include/linux/ssb/ssb_driver_gige.h174
-rw-r--r--include/linux/ssb/ssb_driver_pci.h19
3 files changed, 200 insertions, 0 deletions
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 860d28c..b7c3889 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -422,5 +422,12 @@ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
+/* PCI device mapping and fixup routines.
+ * Called from the architecture pcibios init code.
+ * These are only available on SSB_EMBEDDED configurations. */
+#ifdef CONFIG_SSB_EMBEDDED
+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
new file mode 100644
index 0000000..01fbdf5f
--- /dev/null
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -0,0 +1,174 @@
+#ifndef LINUX_SSB_DRIVER_GIGE_H_
+#define LINUX_SSB_DRIVER_GIGE_H_
+
+#include <linux/ssb/ssb.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+
+#ifdef CONFIG_SSB_DRIVER_GIGE
+
+
+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
+
+/* TM Status High flags */
+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
+/* TM Status Low flags */
+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
+
+/* Boardflags (low) */
+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
+
+
+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
+
+struct ssb_gige {
+ struct ssb_device *dev;
+
+ spinlock_t lock;
+
+ /* True, if the device has an RGMII bus.
+ * False, if the device has a GMII bus. */
+ bool has_rgmii;
+
+ /* The PCI controller device. */
+ struct pci_controller pci_controller;
+ struct pci_ops pci_ops;
+ struct resource mem_resource;
+ struct resource io_resource;
+};
+
+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
+
+/* Convert a pci_dev pointer to a ssb_gige pointer. */
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ if (!pdev_is_ssb_gige_core(pdev))
+ return NULL;
+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
+}
+
+/* Returns whether the PHY is connected by an RGMII bus. */
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ return (dev ? dev->has_rgmii : 0);
+}
+
+/* Returns whether we have a Roboswitch. */
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return !!(dev->dev->bus->sprom.boardflags_lo &
+ SSB_GIGE_BFL_ROBOSWITCH);
+ return 0;
+}
+
+/* Returns whether we can only do one DMA at once. */
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return ((dev->dev->bus->chip_id == 0x4785) &&
+ (dev->dev->bus->chip_rev < 2));
+ return 0;
+}
+
+/* Returns whether we must flush posted writes. */
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (dev)
+ return (dev->dev->bus->chip_id == 0x4785);
+ return 0;
+}
+
+extern char * nvram_get(const char *name);
+/* Get the device MAC address */
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+#ifdef CONFIG_BCM947XX
+ char *res = nvram_get("et0macaddr");
+ if (res)
+ memcpy(macaddr, res, 6);
+#endif
+}
+
+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev);
+extern int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev);
+
+/* The GigE driver is not a standalone module, because we don't have support
+ * for unregistering the driver. So we could not unload the module anyway. */
+extern int ssb_gige_init(void);
+static inline void ssb_gige_exit(void)
+{
+ /* Currently we can not unregister the GigE driver,
+ * because we can not unregister the PCI bridge. */
+ BUG();
+}
+
+
+#else /* CONFIG_SSB_DRIVER_GIGE */
+/* Gigabit Ethernet driver disabled */
+
+
+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
+ const struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+static inline int ssb_gige_init(void)
+{
+ return 0;
+}
+static inline void ssb_gige_exit(void)
+{
+}
+
+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
+{
+ return NULL;
+}
+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
+{
+ return 0;
+}
+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SSB_DRIVER_GIGE */
+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/include/linux/ssb/ssb_driver_pci.h b/include/linux/ssb/ssb_driver_pci.h
index 5e25bac..41e330e 100644
--- a/include/linux/ssb/ssb_driver_pci.h
+++ b/include/linux/ssb/ssb_driver_pci.h
@@ -1,6 +1,11 @@
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
+#include <linux/types.h>
+
+struct pci_dev;
+
+
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_pcicore *pc);
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
#else /* CONFIG_SSB_DRIVER_PCICORE */
@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
return 0;
}
+static inline
+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+{
+ return -ENODEV;
+}
+static inline
+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return -ENODEV;
+}
+
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
OpenPOWER on IntegriCloud