[PATCH] spi: use linked lists rather than an array

This makes the SPI core and its users access transfers in the SPI message
structure as linked list not as an array, as discussed on LKML.

From: David Brownell <dbrownell@users.sourceforge.net>

  Updates including doc, bugfixes to the list code, add
  spi_message_add_tail().  Plus, initialize things _before_ grabbing the
  locks in some cases (in case it grows more expensive).  This also merges
  some bitbang updates of mine that didn't yet make it into the mm tree.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2 files changed, 70 insertions, 29 deletions

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 6a41e26..939afd3 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -263,15 +263,16 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
 
 /**
  * struct spi_transfer - a read/write buffer pair
- * @tx_buf: data to be written (dma-safe address), or NULL
- * @rx_buf: data to be read (dma-safe address), or NULL
- * @tx_dma: DMA address of buffer, if spi_message.is_dma_mapped
- * @rx_dma: DMA address of buffer, if spi_message.is_dma_mapped
+ * @tx_buf: data to be written (dma-safe memory), or NULL
+ * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped
+ * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped
  * @len: size of rx and tx buffers (in bytes)
  * @cs_change: affects chipselect after this transfer completes
  * @delay_usecs: microseconds to delay after this transfer before
  * 	(optionally) changing the chipselect status, then starting
  * 	the next transfer or completing this spi_message.
+ * @transfer_list: transfers are sequenced through spi_message.transfers
  *
  * SPI transfers always write the same number of bytes as they read.
  * Protocol drivers should always provide rx_buf and/or tx_buf.
@@ -279,11 +280,16 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * the data being transferred; that may reduce overhead, when the
  * underlying driver uses dma.
  *
- * All SPI transfers start with the relevant chipselect active.  Drivers
- * can change behavior of the chipselect after the transfer finishes
- * (including any mandatory delay).  The normal behavior is to leave it
- * selected, except for the last transfer in a message.  Setting cs_change
- * allows two additional behavior options:
+ * If the transmit buffer is null, undefined data will be shifted out
+ * while filling rx_buf.  If the receive buffer is null, the data
+ * shifted in will be discarded.  Only "len" bytes shift out (or in).
+ * It's an error to try to shift out a partial word.  (For example, by
+ * shifting out three bytes with word size of sixteen or twenty bits;
+ * the former uses two bytes per word, the latter uses four bytes.)
+ *
+ * All SPI transfers start with the relevant chipselect active.  Normally
+ * it stays selected until after the last transfer in a message.  Drivers
+ * can affect the chipselect signal using cs_change:
  *
  * (i) If the transfer isn't the last one in the message, this flag is
  * used to make the chipselect briefly go inactive in the middle of the
@@ -299,7 +305,8 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * The code that submits an spi_message (and its spi_transfers)
  * to the lower layers is responsible for managing its memory.
  * Zero-initialize every field you don't set up explicitly, to
- * insulate against future API updates.
+ * insulate against future API updates.  After you submit a message
+ * and its transfers, ignore them until its completion callback.
  */
 struct spi_transfer {
 	/* it's ok if tx_buf == rx_buf (right?)
@@ -316,12 +323,13 @@ struct spi_transfer {
 
 	unsigned	cs_change:1;
 	u16		delay_usecs;
+
+	struct list_head transfer_list;
 };
 
 /**
  * struct spi_message - one multi-segment SPI transaction
- * @transfers: the segements of the transaction
- * @n_transfer: how many segments
+ * @transfers: list of transfer segments in this transaction
  * @spi: SPI device to which the transaction is queued
  * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
  *	addresses for each transfer buffer
@@ -333,14 +341,22 @@ struct spi_transfer {
  * @queue: for use by whichever driver currently owns the message
  * @state: for use by whichever driver currently owns the message
  *
+ * An spi_message is used to execute an atomic sequence of data transfers,
+ * each represented by a struct spi_transfer.  The sequence is "atomic"
+ * in the sense that no other spi_message may use that SPI bus until that
+ * sequence completes.  On some systems, many such sequences can execute as
+ * as single programmed DMA transfer.  On all systems, these messages are
+ * queued, and might complete after transactions to other devices.  Messages
+ * sent to a given spi_device are alway executed in FIFO order.
+ *
  * The code that submits an spi_message (and its spi_transfers)
  * to the lower layers is responsible for managing its memory.
  * Zero-initialize every field you don't set up explicitly, to
- * insulate against future API updates.
+ * insulate against future API updates.  After you submit a message
+ * and its transfers, ignore them until its completion callback.
  */
 struct spi_message {
-	struct spi_transfer	*transfers;
-	unsigned		n_transfer;
+	struct list_head 	transfers;
 
 	struct spi_device	*spi;
 
@@ -371,6 +387,24 @@ struct spi_message {
 	void			*state;
 };
 
+static inline void spi_message_init(struct spi_message *m)
+{
+	memset(m, 0, sizeof *m);
+	INIT_LIST_HEAD(&m->transfers);
+}
+
+static inline void
+spi_message_add_tail(struct spi_transfer *t, struct spi_message *m)
+{
+	list_add_tail(&t->transfer_list, &m->transfers);
+}
+
+static inline void
+spi_transfer_del(struct spi_transfer *t)
+{
+	list_del(&t->transfer_list);
+}
+
 /* It's fine to embed message and transaction structures in other data
  * structures so long as you don't free them while they're in use.
  */
@@ -383,8 +417,12 @@ static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags
 			+ ntrans * sizeof(struct spi_transfer),
 			flags);
 	if (m) {
-		m->transfers = (void *)(m + 1);
-		m->n_transfer = ntrans;
+		int i;
+		struct spi_transfer *t = (struct spi_transfer *)(m + 1);
+
+		INIT_LIST_HEAD(&m->transfers);
+		for (i = 0; i < ntrans; i++, t++)
+			spi_message_add_tail(t, m);
 	}
 	return m;
 }
@@ -402,6 +440,8 @@ static inline void spi_message_free(struct spi_message *m)
  * device doesn't work with the mode 0 default.  They may likewise need
  * to update clock rates or word sizes from initial values.  This function
  * changes those settings, and must be called from a context that can sleep.
+ * The changes take effect the next time the device is selected and data
+ * is transferred to or from it.
  */
 static inline int
 spi_setup(struct spi_device *spi)
@@ -468,15 +508,12 @@ spi_write(struct spi_device *spi, const u8 *buf, size_t len)
 {
 	struct spi_transfer	t = {
 			.tx_buf		= buf,
-			.rx_buf		= NULL,
 			.len		= len,
-			.cs_change	= 0,
-		};
-	struct spi_message	m = {
-			.transfers	= &t,
-			.n_transfer	= 1,
 		};
+	struct spi_message	m;
 
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
 	return spi_sync(spi, &m);
 }
 
@@ -493,16 +530,13 @@ static inline int
 spi_read(struct spi_device *spi, u8 *buf, size_t len)
 {
 	struct spi_transfer	t = {
-			.tx_buf		= NULL,
 			.rx_buf		= buf,
 			.len		= len,
-			.cs_change	= 0,
-		};
-	struct spi_message	m = {
-			.transfers	= &t,
-			.n_transfer	= 1,
 		};
+	struct spi_message	m;
 
+	spi_message_init(&m);
+	spi_message_add_tail(&t, &m);
 	return spi_sync(spi, &m);
 }
 
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index 8dfe61a..c961fe9 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -31,8 +31,15 @@ struct spi_bitbang {
 	struct spi_master	*master;
 
 	void	(*chipselect)(struct spi_device *spi, int is_on);
+#define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
+#define	BITBANG_CS_INACTIVE	0
 
+	/* txrx_bufs() may handle dma mapping for transfers that don't
+	 * already have one (transfer.{tx,rx}_dma is zero), or use PIO
+	 */
 	int	(*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
+
+	/* txrx_word[SPI_MODE_*]() just looks like a shift register */
 	u32	(*txrx_word[4])(struct spi_device *spi,
 			unsigned nsecs,
 			u32 word, u8 bits);