summaryrefslogtreecommitdiffstats
path: root/include/linux/spi
diff options
context:
space:
mode:
authorSebastian Andrzej Siewior <bigeasy@linutronix.de>2010-11-24 10:17:14 +0100
committerSebastian Andrzej Siewior <bigeasy@linutronix.de>2010-12-01 13:48:30 +0100
commitd6ea3df0d470fb9260db93883f97764cf9f0e562 (patch)
tree277838ea93d6dc0c7d2a05be757dfa1b8bedb619 /include/linux/spi
parent8348c259dd6a6019a8fa01b0a3443409480f7b9d (diff)
downloadop-kernel-dev-d6ea3df0d470fb9260db93883f97764cf9f0e562.zip
op-kernel-dev-d6ea3df0d470fb9260db93883f97764cf9f0e562.tar.gz
spi/pxa2xx: Add CE4100 support
Sodaville's SPI controller is very much the same as in PXA25x. The difference: - The RX/TX FIFO is only 4 words deep instead of 16 - No DMA support - The SPI controller offers a CS functionality Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Diffstat (limited to 'include/linux/spi')
-rw-r--r--include/linux/spi/pxa2xx_spi.h105
1 files changed, 104 insertions, 1 deletions
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index 471ed68..d3e1075 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -19,7 +19,6 @@
#define __linux_pxa2xx_spi_h
#include <linux/pxa2xx_ssp.h>
-#include <mach/dma.h>
#define PXA2XX_CS_ASSERT (0x01)
#define PXA2XX_CS_DEASSERT (0x02)
@@ -44,6 +43,110 @@ struct pxa2xx_spi_chip {
void (*cs_control)(u32 command);
};
+#ifdef CONFIG_ARCH_PXA
+
+#include <linux/clk.h>
+#include <mach/dma.h>
+
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+#else
+/*
+ * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
+ * plat/ include path.
+ * The CE4100 does not provide DMA support. This bits are here to let the driver
+ * compile and will never be used. Maybe we get DMA support at a later point in
+ * time.
+ */
+
+#define DCSR(n) (n)
+#define DSADR(n) (n)
+#define DTADR(n) (n)
+#define DCMD(n) (n)
+#define DRCMR(n) (n)
+
+#define DCSR_RUN (1 << 31) /* Run Bit */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */
+
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */
+#define DDADR_STOP (1 << 0) /* Stop */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+static inline int pxa_request_dma(char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data)
+{
+ return -ENODEV;
+}
+
+static inline void pxa_free_dma(int dma_ch)
+{
+}
+
+/*
+ * The CE4100 does not have the clk framework implemented and SPI clock can
+ * not be switched on/off or the divider changed.
+ */
+static inline void clk_disable(struct clk *clk)
+{
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+ return 3686400;
+}
+
+#endif
#endif
OpenPOWER on IntegriCloud