summaryrefslogtreecommitdiffstats
path: root/include/linux/spi
diff options
context:
space:
mode:
authorSebastian Reichel <sebastian.reichel@collabora.co.uk>2017-05-15 11:24:35 +0200
committerLinus Walleij <linus.walleij@linaro.org>2017-05-23 09:50:13 +0200
commit5b1a7e803a9fd960b6d75a1d970519c57cfe2618 (patch)
treeff7d8e12b67fc7717c3803b2f3d3f99838bb65c1 /include/linux/spi
parent0d7fcd504cbe8e2a6269a9e267b044700f3da876 (diff)
downloadop-kernel-dev-5b1a7e803a9fd960b6d75a1d970519c57cfe2618.zip
op-kernel-dev-5b1a7e803a9fd960b6d75a1d970519c57cfe2618.tar.gz
pinctrl: mcp23s08: generalize irq property handling
This moves irq property handling from spi/i2c specific code into the generic mcp23s08_probe_one. This is possible because the device properties are named equally. As a side-effect this drops support for setting the properties via pdata, which has no mainline users. If boardcode wants to enable the chip as interrupt controller it can attach the device properties instead. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/linux/spi')
-rw-r--r--include/linux/spi/mcp23s08.h18
1 files changed, 0 insertions, 18 deletions
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 080ecc6..4af82ee 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -21,22 +21,4 @@ struct mcp23s08_platform_data {
* base to base+15 (or base+31 for s17 variant).
*/
unsigned base;
- /* Marks the device as a interrupt controller.
- * NOTE: The interrupt functionality is only supported for i2c
- * versions of the chips. The spi chips can also do the interrupts,
- * but this is not supported by the linux driver yet.
- */
- bool irq_controller;
-
- /* Sets the mirror flag in the IOCON register. Devices
- * with two interrupt outputs (these are the devices ending with 17 and
- * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
- * IO 8-15 are bank 2. These chips have two different interrupt outputs:
- * One for bank 1 and another for bank 2. If irq-mirror is set, both
- * interrupts are generated regardless of the bank that an input change
- * occurred on. If it is not set, the interrupt are only generated for
- * the bank they belong to.
- * On devices with only one interrupt output this property is useless.
- */
- bool mirror;
};
OpenPOWER on IntegriCloud