Input: synaptics-rmi4 - add support for 2D sensors and F11

RMI4 currently defines two functions for reporting data for 2D sensors
(F11 and F12). This patch adds the common functionality which is shared
by devices with 2D reporting along with implementing functionality for
F11.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Christopher Heiny <cheiny@synaptics.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 83 insertions, 0 deletions

diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index c748fa3..b527064 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -20,6 +20,88 @@
 #define NAME_BUFFER_SIZE 256
 
 /**
+ * struct rmi_2d_axis_alignment - target axis alignment
+ * @swap_axes: set to TRUE if desired to swap x- and y-axis
+ * @flip_x: set to TRUE if desired to flip direction on x-axis
+ * @flip_y: set to TRUE if desired to flip direction on y-axis
+ * @clip_x_low - reported X coordinates below this setting will be clipped to
+ *               the specified value
+ * @clip_x_high - reported X coordinates above this setting will be clipped to
+ *               the specified value
+ * @clip_y_low - reported Y coordinates below this setting will be clipped to
+ *               the specified value
+ * @clip_y_high - reported Y coordinates above this setting will be clipped to
+ *               the specified value
+ * @offset_x - this value will be added to all reported X coordinates
+ * @offset_y - this value will be added to all reported Y coordinates
+ * @rel_report_enabled - if set to true, the relative reporting will be
+ *               automatically enabled for this sensor.
+ */
+struct rmi_2d_axis_alignment {
+	bool swap_axes;
+	bool flip_x;
+	bool flip_y;
+	u16 clip_x_low;
+	u16 clip_y_low;
+	u16 clip_x_high;
+	u16 clip_y_high;
+	u16 offset_x;
+	u16 offset_y;
+	u8 delta_x_threshold;
+	u8 delta_y_threshold;
+};
+
+/** This is used to override any hints an F11 2D sensor might have provided
+ * as to what type of sensor it is.
+ *
+ * @rmi_f11_sensor_default - do not override, determine from F11_2D_QUERY14 if
+ * available.
+ * @rmi_f11_sensor_touchscreen - treat the sensor as a touchscreen (direct
+ * pointing).
+ * @rmi_f11_sensor_touchpad - thread the sensor as a touchpad (indirect
+ * pointing).
+ */
+enum rmi_sensor_type {
+	rmi_sensor_default = 0,
+	rmi_sensor_touchscreen,
+	rmi_sensor_touchpad
+};
+
+#define RMI_F11_DISABLE_ABS_REPORT      BIT(0)
+
+/**
+ * struct rmi_2d_sensor_data - overrides defaults for a 2D sensor.
+ * @axis_align - provides axis alignment overrides (see above).
+ * @sensor_type - Forces the driver to treat the sensor as an indirect
+ * pointing device (touchpad) rather than a direct pointing device
+ * (touchscreen).  This is useful when F11_2D_QUERY14 register is not
+ * available.
+ * @disable_report_mask - Force data to not be reported even if it is supported
+ * by the firware.
+ * @topbuttonpad - Used with the "5 buttons touchpads" found on the Lenovo 40
+ * series
+ * @kernel_tracking - most moderns RMI f11 firmwares implement Multifinger
+ * Type B protocol. However, there are some corner cases where the user
+ * triggers some jumps by tapping with two fingers on the touchpad.
+ * Use this setting and dmax to filter out these jumps.
+ * Also, when using an old sensor using MF Type A behavior, set to true to
+ * report an actual MT protocol B.
+ * @dmax - the maximum distance (in sensor units) the kernel tracking allows two
+ * distincts fingers to be considered the same.
+ */
+struct rmi_2d_sensor_platform_data {
+	struct rmi_2d_axis_alignment axis_align;
+	enum rmi_sensor_type sensor_type;
+	int x_mm;
+	int y_mm;
+	int disable_report_mask;
+	u16 rezero_wait;
+	bool topbuttonpad;
+	bool kernel_tracking;
+	int dmax;
+};
+
+/**
  * struct rmi_f01_power - override default power management settings.
  *
  */
@@ -63,6 +145,7 @@ struct rmi_device_platform_data {
 	int reset_delay_ms;
 
 	/* function handler pdata */
+	struct rmi_2d_sensor_platform_data *sensor_pdata;
 	struct rmi_f01_power_management power_management;
 };