rapidio: add Port-Write handling for EM

Add RapidIO Port-Write message handling in the context of Error
   Management Extensions Specification Rev.1.3.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 58 insertions, 3 deletions

diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 4bfb0dc..96ba2159 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -192,10 +192,14 @@
 #define RIO_EFB_PAR_EP_ID	0x0001	/* [IV] LP/LVDS EP Devices */
 #define RIO_EFB_PAR_EP_REC_ID	0x0002	/* [IV] LP/LVDS EP Recovery Devices */
 #define RIO_EFB_PAR_EP_FREE_ID	0x0003	/* [IV] LP/LVDS EP Free Devices */
+#define RIO_EFB_SER_EP_ID_V13P	0x0001	/* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_REC_ID_V13P	0x0002	/* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_FREE_ID_V13P	0x0003	/* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
 #define RIO_EFB_SER_EP_ID	0x0004	/* [VI] LP/Serial EP Devices */
 #define RIO_EFB_SER_EP_REC_ID	0x0005	/* [VI] LP/Serial EP Recovery Devices */
 #define RIO_EFB_SER_EP_FREE_ID	0x0006	/* [VI] LP/Serial EP Free Devices */
 #define RIO_EFB_SER_EP_FREC_ID	0x0009  /* [VI] LP/Serial EP Free Recovery Devices */
+#define RIO_EFB_ERR_MGMNT	0x0007  /* [VIII] Error Management Extensions */
 
 /*
  * Physical 8/16 LP-LVDS
@@ -211,15 +215,66 @@
 #define RIO_PORT_MNT_HEADER		0x0000
 #define RIO_PORT_REQ_CTL_CSR		0x0020
 #define RIO_PORT_RSP_CTL_CSR		0x0024	/* 0x0001/0x0002 */
+#define RIO_PORT_LINKTO_CTL_CSR		0x0020	/* Serial */
+#define RIO_PORT_RSPTO_CTL_CSR		0x0024	/* Serial */
 #define RIO_PORT_GEN_CTL_CSR		0x003c
 #define  RIO_PORT_GEN_HOST		0x80000000
 #define  RIO_PORT_GEN_MASTER		0x40000000
 #define  RIO_PORT_GEN_DISCOVERED	0x20000000
 #define RIO_PORT_N_MNT_REQ_CSR(x)	(0x0040 + x*0x20)	/* 0x0002 */
 #define RIO_PORT_N_MNT_RSP_CSR(x)	(0x0044 + x*0x20)	/* 0x0002 */
+#define  RIO_PORT_N_MNT_RSP_RVAL	0x80000000 /* Response Valid */
+#define  RIO_PORT_N_MNT_RSP_ASTAT	0x000003e0 /* ackID Status */
+#define  RIO_PORT_N_MNT_RSP_LSTAT	0x0000001f /* Link Status */
 #define RIO_PORT_N_ACK_STS_CSR(x)	(0x0048 + x*0x20)	/* 0x0002 */
-#define RIO_PORT_N_ERR_STS_CSR(x)	(0x58 + x*0x20)
-#define PORT_N_ERR_STS_PORT_OK	0x00000002
-#define RIO_PORT_N_CTL_CSR(x)		(0x5c + x*0x20)
+#define  RIO_PORT_N_ACK_CLEAR		0x80000000
+#define  RIO_PORT_N_ACK_INBOUND		0x1f000000
+#define  RIO_PORT_N_ACK_OUTSTAND	0x00001f00
+#define  RIO_PORT_N_ACK_OUTBOUND	0x0000001f
+#define RIO_PORT_N_ERR_STS_CSR(x)	(0x0058 + x*0x20)
+#define  RIO_PORT_N_ERR_STS_PW_OUT_ES	0x00010000 /* Output Error-stopped */
+#define  RIO_PORT_N_ERR_STS_PW_INP_ES	0x00000100 /* Input Error-stopped */
+#define  RIO_PORT_N_ERR_STS_PW_PEND	0x00000010 /* Port-Write Pending */
+#define  RIO_PORT_N_ERR_STS_PORT_ERR	0x00000004
+#define  RIO_PORT_N_ERR_STS_PORT_OK	0x00000002
+#define  RIO_PORT_N_ERR_STS_PORT_UNINIT	0x00000001
+#define  RIO_PORT_N_ERR_STS_CLR_MASK	0x07120204
+#define RIO_PORT_N_CTL_CSR(x)		(0x005c + x*0x20)
+#define  RIO_PORT_N_CTL_PWIDTH		0xc0000000
+#define  RIO_PORT_N_CTL_PWIDTH_1	0x00000000
+#define  RIO_PORT_N_CTL_PWIDTH_4	0x40000000
+#define  RIO_PORT_N_CTL_LOCKOUT		0x00000002
+
+/*
+ * Error Management Extensions (RapidIO 1.3+, Part 8)
+ *
+ * Extended Features Block ID=0x0007
+ */
+
+/* General EM Registers (Common for all Ports) */
+
+#define RIO_EM_EFB_HEADER	0x000	/* Error Management Extensions Block Header */
+#define RIO_EM_LTL_ERR_DETECT	0x008	/* Logical/Transport Layer Error Detect CSR */
+#define RIO_EM_LTL_ERR_EN	0x00c	/* Logical/Transport Layer Error Enable CSR */
+#define RIO_EM_LTL_HIADDR_CAP	0x010	/* Logical/Transport Layer High Address Capture CSR */
+#define RIO_EM_LTL_ADDR_CAP	0x014	/* Logical/Transport Layer Address Capture CSR */
+#define RIO_EM_LTL_DEVID_CAP	0x018	/* Logical/Transport Layer Device ID Capture CSR */
+#define RIO_EM_LTL_CTRL_CAP	0x01c	/* Logical/Transport Layer Control Capture CSR */
+#define RIO_EM_PW_TGT_DEVID	0x028	/* Port-write Target deviceID CSR */
+#define RIO_EM_PKT_TTL		0x02c	/* Packet Time-to-live CSR */
+
+/* Per-Port EM Registers */
+
+#define RIO_EM_PN_ERR_DETECT(x)	(0x040 + x*0x40) /* Port N Error Detect CSR */
+#define  REM_PED_IMPL_SPEC		0x80000000
+#define  REM_PED_LINK_TO		0x00000001
+#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
+#define RIO_EM_PN_ATTRIB_CAP(x)	(0x048 + x*0x40) /* Port N Attributes Capture CSR */
+#define RIO_EM_PN_PKT_CAP_0(x)	(0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
+#define RIO_EM_PN_PKT_CAP_1(x)	(0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
+#define RIO_EM_PN_PKT_CAP_2(x)	(0x054 + x*0x40) /* Port N Packet Capture 2 CSR */
+#define RIO_EM_PN_PKT_CAP_3(x)	(0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
+#define RIO_EM_PN_ERRRATE(x)	(0x068 + x*0x40) /* Port N Error Rate CSR */
+#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
 
 #endif				/* LINUX_RIO_REGS_H */