Merge branch 'for_3.6/pm/sr-move' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-driver

1 files changed, 308 insertions, 0 deletions

diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
new file mode 100644
index 0000000..3101e62
--- /dev/null
+++ b/include/linux/power/smartreflex.h
@@ -0,0 +1,308 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __POWER_SMARTREFLEX_H
+#define __POWER_SMARTREFLEX_H
+
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1	1
+#define SR_TYPE_V2	2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG		0x00
+#define SRSTATUS		0x04
+#define SENVAL			0x08
+#define SENMIN			0x0C
+#define SENMAX			0x10
+#define SENAVG			0x14
+#define AVGWEIGHT		0x18
+#define NVALUERECIPROCAL	0x1c
+#define SENERROR_V1		0x20
+#define ERRCONFIG_V1		0x24
+#define IRQ_EOI			0x20
+#define IRQSTATUS_RAW		0x24
+#define IRQSTATUS		0x28
+#define IRQENABLE_SET		0x2C
+#define IRQENABLE_CLR		0x30
+#define SENERROR_V2		0x34
+#define ERRCONFIG_V2		0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT	22
+#define SRCONFIG_SRCLKLENGTH_SHIFT	12
+#define SRCONFIG_SENNENABLE_V1_SHIFT	5
+#define SRCONFIG_SENPENABLE_V1_SHIFT	3
+#define SRCONFIG_SENNENABLE_V2_SHIFT	1
+#define SRCONFIG_SENPENABLE_V2_SHIFT	0
+#define SRCONFIG_CLKCTRL_SHIFT		0
+
+#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
+
+#define SRCONFIG_SRENABLE		BIT(11)
+#define SRCONFIG_SENENABLE		BIT(10)
+#define SRCONFIG_ERRGEN_EN		BIT(9)
+#define SRCONFIG_MINMAXAVG_EN		BIT(8)
+#define SRCONFIG_DELAYCTRL		BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
+#define NVALUERECIPROCAL_RNSENP_SHIFT	8
+#define NVALUERECIPROCAL_RNSENN_SHIFT	0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT	16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
+
+#define SR_ERRWEIGHT_MASK		(0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
+#define SR_ERRMINLIMIT_MASK		(0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
+#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
+#define ERRCONFIG_MCUACCUMINTST		BIT(28)
+#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
+#define ERRCONFIG_MCUVALIDINTST		BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
+#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
+#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
+#define ERRCONFIG_MCUDISACKINTST	BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
+					ERRCONFIG_MCUACCUMINTST | \
+					ERRCONFIG_MCUVALIDINTST | \
+					ERRCONFIG_MCUBOUNDINTST | \
+					ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT		BIT(3)
+#define IRQSTATUS_MCVALIDINT		BIT(2)
+#define IRQSTATUS_MCBOUNDSINT		BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT		BIT(3)
+#define IRQENABLE_MCUVALIDINT		BIT(2)
+#define IRQENABLE_MCUBOUNDSINT		BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA		0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
+
+#define OMAP3430_SR_ERRWEIGHT		0x04
+#define OMAP3430_SR_ERRMAXLIMIT		0x02
+
+struct omap_sr {
+	char				*name;
+	struct list_head		node;
+	struct platform_device		*pdev;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+	struct dentry			*dbg_dir;
+	unsigned int			irq;
+	int				srid;
+	int				ip_type;
+	int				nvalue_count;
+	bool				autocomp_active;
+	u32				clk_length;
+	u32				err_weight;
+	u32				err_minlimit;
+	u32				err_maxlimit;
+	u32				accum_data;
+	u32				senn_avgweight;
+	u32				senp_avgweight;
+	u32				senp_mod;
+	u32				senn_mod;
+	void __iomem			*base;
+};
+
+/**
+ * test_cond_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ *
+ * Copied from omap_test_timeout */
+#define sr_test_cond_timeout(cond, timeout, index)		\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ *				pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+	void (*sr_pmic_init) (void);
+};
+
+/**
+ * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
+ *
+ * @sensor_voltdm_name:       Name of voltdomain of SR instance
+ */
+struct omap_smartreflex_dev_attr {
+	const char      *sensor_voltdm_name;
+};
+
+#ifdef CONFIG_POWER_AVS_OMAP
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1	0x1
+#define SR_CLASS2	0x2
+#define SR_CLASS3	0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable:		API to enable a particular class smaartreflex.
+ * @disable:		API to disable a particular class smartreflex.
+ * @configure:		API to configure a particular class smartreflex.
+ * @notify:		API to notify the class driver about an event in SR.
+ *			Not needed for class3.
+ * @notify_flags:	specify the events to be notified to the class driver
+ * @class_type:		specify which smartreflex class.
+ *			Can be used by the SR driver to take any class
+ *			based decisions.
+ */
+struct omap_sr_class_data {
+	int (*enable)(struct omap_sr *sr);
+	int (*disable)(struct omap_sr *sr, int is_volt_reset);
+	int (*configure)(struct omap_sr *sr);
+	int (*notify)(struct omap_sr *sr, u32 status);
+	u8 notify_flags;
+	u8 class_type;
+};
+
+/**
+ * struct omap_sr_nvalue_table	- Smartreflex n-target value info
+ *
+ * @efuse_offs:	  The offset of the efuse where n-target values are stored.
+ * @nvalue:	  The n-target value.
+ * @errminlimit:  The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
+ */
+struct omap_sr_nvalue_table {
+	u32 efuse_offs;
+	u32 nvalue;
+	u32 errminlimit;
+	unsigned long volt_nominal;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @name:		instance name
+ * @ip_type:		Smartreflex IP type.
+ * @senp_mod:		SENPENABLE value for the sr
+ * @senn_mod:		SENNENABLE value for sr
+ * @nvalue_count:	Number of distinct nvalues in the nvalue table
+ * @enable_on_init:	whether this sr module needs to enabled at
+ *			boot up or not.
+ * @nvalue_table:	table containing the  efuse offsets and nvalues
+ *			corresponding to them.
+ * @voltdm:		Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+	const char			*name;
+	int				ip_type;
+	u32				senp_mod;
+	u32				senn_mod;
+	int				nvalue_count;
+	bool				enable_on_init;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_disable_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+		struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+		struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif