summaryrefslogtreecommitdiffstats
path: root/include/linux/mtd
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@cruncher.tec.linutronix.de>2006-05-23 11:50:56 +0200
committerThomas Gleixner <tglx@cruncher.tec.linutronix.de>2006-05-23 11:50:56 +0200
commit2c0a2bed9276ebbec5794edc07f66e21e9a1735c (patch)
treead0fb96624fd92f270d9e5d1cbbff14ffd7921f0 /include/linux/mtd
parentdcb0932884b801290efd80fbc37630297b98181f (diff)
downloadop-kernel-dev-2c0a2bed9276ebbec5794edc07f66e21e9a1735c.zip
op-kernel-dev-2c0a2bed9276ebbec5794edc07f66e21e9a1735c.tar.gz
[MTD] NAND whitespace and formatting cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'include/linux/mtd')
-rw-r--r--include/linux/mtd/nand.h103
1 files changed, 34 insertions, 69 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 05c6ecc..014ceef 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -11,47 +11,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Info:
- * Contains standard defines and IDs for NAND flash devices
+ * Info:
+ * Contains standard defines and IDs for NAND flash devices
*
- * Changelog:
- * 01-31-2000 DMW Created
- * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers
- * so it can be used by other NAND flash device
- * drivers. I also changed the copyright since none
- * of the original contents of this file are specific
- * to DoC devices. David can whack me with a baseball
- * bat later if I did something naughty.
- * 10-11-2000 SJH Added private NAND flash structure for driver
- * 10-24-2000 SJH Added prototype for 'nand_scan' function
- * 10-29-2001 TG changed nand_chip structure to support
- * hardwarespecific function for accessing control lines
- * 02-21-2002 TG added support for different read/write adress and
- * ready/busy line access function
- * 02-26-2002 TG added chip_delay to nand_chip structure to optimize
- * command delay times for different chips
- * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate
- * defines in jffs2/wbuf.c
- * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if
- * CONFIG_MTD_NAND_ECC_JFFS2 is not set
- * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC
- *
- * 08-29-2002 tglx nand_chip structure: data_poi for selecting
- * internal / fs-driver buffer
- * support for 6byte/512byte hardware ECC
- * read_ecc, write_ecc extended for different oob-layout
- * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
- * NAND_YAFFS_OOB
- * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL
- * Split manufacturer and device ID structures
- *
- * 02-08-2004 tglx added option field to nand structure for chip anomalities
- * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id
- * update of nand_chip structure description
- * 01-17-2005 dmarlin added extended commands for AG-AND device and added option
- * for BBT_AUTO_REFRESH.
- * 01-20-2005 dmarlin added optional pointer to hardware specific callback for
- * extra error status checks.
+ * Changelog:
+ * See git changelog.
*/
#ifndef __LINUX_MTD_NAND_H
#define __LINUX_MTD_NAND_H
@@ -68,7 +32,8 @@ extern int nand_scan (struct mtd_info *mtd, int max_chips);
extern void nand_release (struct mtd_info *mtd);
/* Read raw data from the device without ECC */
-extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
+extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from,
+ size_t len, size_t ooblen);
/* The maximum number of NAND chips in an array */
@@ -84,7 +49,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
* Constants for hardware specific CLE/ALE/NCE function
*/
/* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 1
+#define NAND_CTL_SETNCE 1
/* Deselect the chip by setting nCE to high */
#define NAND_CTL_CLRNCE 2
/* Select the command latch by setting CLE to high */
@@ -285,19 +250,19 @@ struct nand_hw_control {
* is read from the chip status register
* @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
* @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware
+ * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware
* @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
* @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
* be provided if a hardware ECC is available
* @erase_cmd: [INTERN] erase command write function, selectable due to AND support
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize: [INTERN] databytes used per ecc-calculation
- * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step
+ * @eccsize: [INTERN] databytes used per ecc-calculation
+ * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step
* @eccsteps: [INTERN] number of ecc calculation steps per page
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
* @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress
- * @state: [INTERN] the current state of the NAND device
+ * @state: [INTERN] the current state of the NAND device
* @page_shift: [INTERN] number of address bits in a page (column address bits)
* @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
@@ -327,7 +292,7 @@ struct nand_hw_control {
struct nand_chip {
void __iomem *IO_ADDR_R;
- void __iomem *IO_ADDR_W;
+ void __iomem *IO_ADDR_W;
u_char (*read_byte)(struct mtd_info *mtd);
void (*write_byte)(struct mtd_info *mtd, u_char byte);
@@ -340,12 +305,12 @@ struct nand_chip {
void (*select_chip)(struct mtd_info *mtd, int chip);
int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
- int (*dev_ready)(struct mtd_info *mtd);
- void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
- int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
+ int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
- int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+ int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
void (*enable_hwecc)(struct mtd_info *mtd, int mode);
void (*erase_cmd)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
@@ -353,14 +318,14 @@ struct nand_chip {
int eccsize;
int eccbytes;
int eccsteps;
- int chip_delay;
+ int chip_delay;
wait_queue_head_t wq;
- nand_state_t state;
- int page_shift;
+ nand_state_t state;
+ int page_shift;
int phys_erase_shift;
int bbt_erase_shift;
int chip_shift;
- u_char *data_buf;
+ u_char *data_buf;
u_char *oob_buf;
int oobdirty;
u_char *data_poi;
@@ -389,19 +354,19 @@ struct nand_chip {
#define NAND_MFR_NATIONAL 0x8f
#define NAND_MFR_RENESAS 0x07
#define NAND_MFR_STMICRO 0x20
-#define NAND_MFR_HYNIX 0xad
+#define NAND_MFR_HYNIX 0xad
/**
* struct nand_flash_dev - NAND Flash Device ID Structure
*
- * @name: Identify the device type
- * @id: device ID code
- * @pagesize: Pagesize in bytes. Either 256 or 512 or 0
+ * @name: Identify the device type
+ * @id: device ID code
+ * @pagesize: Pagesize in bytes. Either 256 or 512 or 0
* If the pagesize is 0, then the real pagesize
* and the eraseize are determined from the
* extended id bytes in the chip
- * @erasesize: Size of an erase block in the flash device.
- * @chipsize: Total chipsize in Mega Bytes
+ * @erasesize: Size of an erase block in the flash device.
+ * @chipsize: Total chipsize in Mega Bytes
* @options: Bitfield to store chip relevant options
*/
struct nand_flash_dev {
@@ -416,7 +381,7 @@ struct nand_flash_dev {
/**
* struct nand_manufacturers - NAND Flash Manufacturer ID Structure
* @name: Manufacturer name
- * @id: manufacturer ID code of device.
+ * @id: manufacturer ID code of device.
*/
struct nand_manufacturers {
int id;
@@ -456,7 +421,7 @@ struct nand_bbt_descr {
int veroffs;
uint8_t version[NAND_MAX_CHIPS];
int len;
- int maxblocks;
+ int maxblocks;
int reserved_block_code;
uint8_t *pattern;
};
@@ -501,8 +466,8 @@ extern int nand_default_bbt (struct mtd_info *mtd);
extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
- size_t * retlen, u_char * buf, u_char * oob_buf,
- struct nand_oobinfo *oobsel, int flags);
+ size_t * retlen, u_char * buf, u_char * oob_buf,
+ struct nand_oobinfo *oobsel, int flags);
/*
* Constants for oob configuration
@@ -526,7 +491,7 @@ struct platform_nand_chip {
int chip_offset;
int nr_partitions;
struct mtd_partition *partitions;
- int chip_delay;
+ int chip_delay;
unsigned int options;
void *priv;
};
@@ -542,8 +507,8 @@ struct platform_nand_chip {
* All fields are optional and depend on the hardware driver requirements
*/
struct platform_nand_ctrl {
- void (*hwcontrol)(struct mtd_info *mtd, int cmd);
- int (*dev_ready)(struct mtd_info *mtd);
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
void (*select_chip)(struct mtd_info *mtd, int chip);
void *priv;
};
OpenPOWER on IntegriCloud