Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

4 files changed, 514 insertions, 0 deletions

diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
new file mode 100644
index 0000000..aefedf0
--- /dev/null
+++ b/include/linux/mmc/card.h
@@ -0,0 +1,92 @@
+/*
+ *  linux/include/linux/mmc/card.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Card driver specific definitions.
+ */
+#ifndef LINUX_MMC_CARD_H
+#define LINUX_MMC_CARD_H
+
+#include <linux/mmc/mmc.h>
+
+struct mmc_cid {
+	unsigned int		manfid;
+	char			prod_name[8];
+	unsigned int		serial;
+	unsigned short		oemid;
+	unsigned short		year;
+	unsigned char		hwrev;
+	unsigned char		fwrev;
+	unsigned char		month;
+};
+
+struct mmc_csd {
+	unsigned char		mmca_vsn;
+	unsigned short		cmdclass;
+	unsigned short		tacc_clks;
+	unsigned int		tacc_ns;
+	unsigned int		max_dtr;
+	unsigned int		read_blkbits;
+	unsigned int		capacity;
+};
+
+struct mmc_host;
+
+/*
+ * MMC device
+ */
+struct mmc_card {
+	struct list_head	node;		/* node in hosts devices list */
+	struct mmc_host		*host;		/* the host this device belongs to */
+	struct device		dev;		/* the device */
+	unsigned int		rca;		/* relative card address of device */
+	unsigned int		state;		/* (our) card state */
+#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
+#define MMC_STATE_DEAD		(1<<1)		/* device no longer in stack */
+#define MMC_STATE_BAD		(1<<2)		/* unrecognised device */
+	u32			raw_cid[4];	/* raw card CID */
+	u32			raw_csd[4];	/* raw card CSD */
+	struct mmc_cid		cid;		/* card identification */
+	struct mmc_csd		csd;		/* card specific */
+};
+
+#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
+#define mmc_card_dead(c)	((c)->state & MMC_STATE_DEAD)
+#define mmc_card_bad(c)		((c)->state & MMC_STATE_BAD)
+
+#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
+#define mmc_card_set_dead(c)	((c)->state |= MMC_STATE_DEAD)
+#define mmc_card_set_bad(c)	((c)->state |= MMC_STATE_BAD)
+
+#define mmc_card_name(c)	((c)->cid.prod_name)
+#define mmc_card_id(c)		((c)->dev.bus_id)
+
+#define mmc_list_to_card(l)	container_of(l, struct mmc_card, node)
+#define mmc_get_drvdata(c)	dev_get_drvdata(&(c)->dev)
+#define mmc_set_drvdata(c,d)	dev_set_drvdata(&(c)->dev, d)
+
+/*
+ * MMC device driver (e.g., Flash card, I/O card...)
+ */
+struct mmc_driver {
+	struct device_driver drv;
+	int (*probe)(struct mmc_card *);
+	void (*remove)(struct mmc_card *);
+	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*resume)(struct mmc_card *);
+};
+
+extern int mmc_register_driver(struct mmc_driver *);
+extern void mmc_unregister_driver(struct mmc_driver *);
+
+static inline int mmc_card_claim_host(struct mmc_card *card)
+{
+	return __mmc_claim_host(card->host, card);
+}
+
+#define mmc_card_release_host(c)	mmc_release_host((c)->host)
+
+#endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
new file mode 100644
index 0000000..f67686c
--- /dev/null
+++ b/include/linux/mmc/host.h
@@ -0,0 +1,108 @@
+/*
+ *  linux/include/linux/mmc/host.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Host driver specific definitions.
+ */
+#ifndef LINUX_MMC_HOST_H
+#define LINUX_MMC_HOST_H
+
+#include <linux/mmc/mmc.h>
+
+struct mmc_ios {
+	unsigned int	clock;			/* clock rate */
+	unsigned short	vdd;
+
+#define	MMC_VDD_150	0
+#define	MMC_VDD_155	1
+#define	MMC_VDD_160	2
+#define	MMC_VDD_165	3
+#define	MMC_VDD_170	4
+#define	MMC_VDD_180	5
+#define	MMC_VDD_190	6
+#define	MMC_VDD_200	7
+#define	MMC_VDD_210	8
+#define	MMC_VDD_220	9
+#define	MMC_VDD_230	10
+#define	MMC_VDD_240	11
+#define	MMC_VDD_250	12
+#define	MMC_VDD_260	13
+#define	MMC_VDD_270	14
+#define	MMC_VDD_280	15
+#define	MMC_VDD_290	16
+#define	MMC_VDD_300	17
+#define	MMC_VDD_310	18
+#define	MMC_VDD_320	19
+#define	MMC_VDD_330	20
+#define	MMC_VDD_340	21
+#define	MMC_VDD_350	22
+#define	MMC_VDD_360	23
+
+	unsigned char	bus_mode;		/* command output mode */
+
+#define MMC_BUSMODE_OPENDRAIN	1
+#define MMC_BUSMODE_PUSHPULL	2
+
+	unsigned char	power_mode;		/* power supply mode */
+
+#define MMC_POWER_OFF		0
+#define MMC_POWER_UP		1
+#define MMC_POWER_ON		2
+};
+
+struct mmc_host_ops {
+	void	(*request)(struct mmc_host *host, struct mmc_request *req);
+	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
+};
+
+struct mmc_card;
+struct device;
+
+struct mmc_host {
+	struct device		*dev;
+	struct mmc_host_ops	*ops;
+	unsigned int		f_min;
+	unsigned int		f_max;
+	u32			ocr_avail;
+	char			host_name[8];
+
+	/* host specific block data */
+	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
+	unsigned short		max_hw_segs;	/* see blk_queue_max_hw_segments */
+	unsigned short		max_phys_segs;	/* see blk_queue_max_phys_segments */
+	unsigned short		max_sectors;	/* see blk_queue_max_sectors */
+	unsigned short		unused;
+
+	/* private data */
+	struct mmc_ios		ios;		/* current io bus settings */
+	u32			ocr;		/* the current OCR setting */
+
+	struct list_head	cards;		/* devices attached to this host */
+
+	wait_queue_head_t	wq;
+	spinlock_t		lock;		/* card_busy lock */
+	struct mmc_card		*card_busy;	/* the MMC card claiming host */
+	struct mmc_card		*card_selected;	/* the selected MMC card */
+
+	struct work_struct	detect;
+};
+
+extern struct mmc_host *mmc_alloc_host(int extra, struct device *);
+extern int mmc_add_host(struct mmc_host *);
+extern void mmc_remove_host(struct mmc_host *);
+extern void mmc_free_host(struct mmc_host *);
+
+#define mmc_priv(x)	((void *)((x) + 1))
+#define mmc_dev(x)	((x)->dev)
+
+extern int mmc_suspend_host(struct mmc_host *, u32);
+extern int mmc_resume_host(struct mmc_host *);
+
+extern void mmc_detect_change(struct mmc_host *);
+extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
+
+#endif
+
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
new file mode 100644
index 0000000..0d35d4f
--- /dev/null
+++ b/include/linux/mmc/mmc.h
@@ -0,0 +1,101 @@
+/*
+ *  linux/include/linux/mmc/mmc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef MMC_H
+#define MMC_H
+
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+
+struct request;
+struct mmc_data;
+struct mmc_request;
+
+struct mmc_command {
+	u32			opcode;
+	u32			arg;
+	u32			resp[4];
+	unsigned int		flags;		/* expected response type */
+#define MMC_RSP_NONE	(0 << 0)
+#define MMC_RSP_SHORT	(1 << 0)
+#define MMC_RSP_LONG	(2 << 0)
+#define MMC_RSP_MASK	(3 << 0)
+#define MMC_RSP_CRC	(1 << 3)		/* expect valid crc */
+#define MMC_RSP_BUSY	(1 << 4)		/* card may send busy */
+
+/*
+ * These are the response types, and correspond to valid bit
+ * patterns of the above flags.  One additional valid pattern
+ * is all zeros, which means we don't expect a response.
+ */
+#define MMC_RSP_R1	(MMC_RSP_SHORT|MMC_RSP_CRC)
+#define MMC_RSP_R1B	(MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_BUSY)
+#define MMC_RSP_R2	(MMC_RSP_LONG|MMC_RSP_CRC)
+#define MMC_RSP_R3	(MMC_RSP_SHORT)
+#define MMC_RSP_R6	(MMC_RSP_SHORT|MMC_RSP_CRC)
+
+	unsigned int		retries;	/* max number of retries */
+	unsigned int		error;		/* command error */
+
+#define MMC_ERR_NONE	0
+#define MMC_ERR_TIMEOUT	1
+#define MMC_ERR_BADCRC	2
+#define MMC_ERR_FIFO	3
+#define MMC_ERR_FAILED	4
+#define MMC_ERR_INVALID	5
+
+	struct mmc_data		*data;		/* data segment associated with cmd */
+	struct mmc_request	*mrq;		/* assoicated request */
+};
+
+struct mmc_data {
+	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
+	unsigned int		timeout_clks;	/* data timeout (in clocks) */
+	unsigned int		blksz_bits;	/* data block size */
+	unsigned int		blocks;		/* number of blocks */
+	unsigned int		error;		/* data error */
+	unsigned int		flags;
+
+#define MMC_DATA_WRITE	(1 << 8)
+#define MMC_DATA_READ	(1 << 9)
+#define MMC_DATA_STREAM	(1 << 10)
+
+	unsigned int		bytes_xfered;
+
+	struct mmc_command	*stop;		/* stop command */
+	struct mmc_request	*mrq;		/* assoicated request */
+
+	unsigned int		sg_len;		/* size of scatter list */
+	struct scatterlist	*sg;		/* I/O scatter list */
+};
+
+struct mmc_request {
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+	struct mmc_command	*stop;
+
+	void			*done_data;	/* completion data */
+	void			(*done)(struct mmc_request *);/* completion function */
+};
+
+struct mmc_host;
+struct mmc_card;
+
+extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+
+extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card);
+
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, (struct mmc_card *)-1);
+}
+
+extern void mmc_release_host(struct mmc_host *host);
+
+#endif
diff --git a/include/linux/mmc/protocol.h b/include/linux/mmc/protocol.h
new file mode 100644
index 0000000..7b904c5
--- /dev/null
+++ b/include/linux/mmc/protocol.h
@@ -0,0 +1,213 @@
+/*
+ * Header for MultiMediaCard (MMC)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Based strongly on code by:
+ *
+ * Author: Yong-iL Joh <tolkien@mizi.com>
+ * Date  : $Date: 2002/06/18 12:37:30 $
+ *
+ * Author:  Andrew Christian
+ *          15 May 2002
+ */
+
+#ifndef MMC_MMC_PROTOCOL_H
+#define MMC_MMC_PROTOCOL_H
+
+/* Standard MMC commands (3.1)           type  argument     response */
+   /* class 1 */
+#define	MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
+#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
+#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
+#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
+#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
+#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
+#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
+#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
+#define MMC_SEND_STATUS	         13   /* ac   [31:16] RCA        R1  */
+#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+
+  /* class 2 */
+#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
+#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
+#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
+
+  /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
+
+  /* class 4 */
+#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
+#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
+#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
+#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
+
+  /* class 6 */
+#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
+#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
+#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+
+  /* class 5 */
+#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE                37   /* ac                      R1b */
+
+  /* class 9 */
+#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
+#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
+
+  /* class 7 */
+#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
+
+  /* class 8 */
+#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
+#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1b */
+
+/* SD commands                           type  argument     response */
+  /* class 8 */
+/* This is basically the same command as for MMC with some quirks. */
+#define SD_SEND_RELATIVE_ADDR     3   /* ac                      R6  */
+
+  /* Application commands */
+#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
+#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
+#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
+
+/*
+  MMC status in R1
+  Type
+  	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+  	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
+#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
+#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
+#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
+#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
+#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
+#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
+#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
+#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
+#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
+#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
+#define R1_CC_ERROR		(1 << 20)	/* erx, c */
+#define R1_ERROR		(1 << 19)	/* erx, c */
+#define R1_UNDERRUN		(1 << 18)	/* ex, c */
+#define R1_OVERRUN		(1 << 17)	/* ex, c */
+#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
+#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
+#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
+#define R1_STATUS(x)            (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x)    	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
+#define R1_APP_CMD		(1 << 5)	/* sr, c */
+
+/* These are unpacked versions of the actual responses */
+
+struct _mmc_csd {
+	u8  csd_structure;
+	u8  spec_vers;
+	u8  taac;
+	u8  nsac;
+	u8  tran_speed;
+	u16 ccc;
+	u8  read_bl_len;
+	u8  read_bl_partial;
+	u8  write_blk_misalign;
+	u8  read_blk_misalign;
+	u8  dsr_imp;
+	u16 c_size;
+	u8  vdd_r_curr_min;
+	u8  vdd_r_curr_max;
+	u8  vdd_w_curr_min;
+	u8  vdd_w_curr_max;
+	u8  c_size_mult;
+	union {
+		struct { /* MMC system specification version 3.1 */
+			u8  erase_grp_size;
+			u8  erase_grp_mult;
+		} v31;
+		struct { /* MMC system specification version 2.2 */
+			u8  sector_size;
+			u8  erase_grp_size;
+		} v22;
+	} erase;
+	u8  wp_grp_size;
+	u8  wp_grp_enable;
+	u8  default_ecc;
+	u8  r2w_factor;
+	u8  write_bl_len;
+	u8  write_bl_partial;
+	u8  file_format_grp;
+	u8  copy;
+	u8  perm_write_protect;
+	u8  tmp_write_protect;
+	u8  file_format;
+	u8  ecc;
+};
+
+#define MMC_VDD_145_150	0x00000001	/* VDD voltage 1.45 - 1.50 */
+#define MMC_VDD_150_155	0x00000002	/* VDD voltage 1.50 - 1.55 */
+#define MMC_VDD_155_160	0x00000004	/* VDD voltage 1.55 - 1.60 */
+#define MMC_VDD_160_165	0x00000008	/* VDD voltage 1.60 - 1.65 */
+#define MMC_VDD_165_170	0x00000010	/* VDD voltage 1.65 - 1.70 */
+#define MMC_VDD_17_18	0x00000020	/* VDD voltage 1.7 - 1.8 */
+#define MMC_VDD_18_19	0x00000040	/* VDD voltage 1.8 - 1.9 */
+#define MMC_VDD_19_20	0x00000080	/* VDD voltage 1.9 - 2.0 */
+#define MMC_VDD_20_21	0x00000100	/* VDD voltage 2.0 ~ 2.1 */
+#define MMC_VDD_21_22	0x00000200	/* VDD voltage 2.1 ~ 2.2 */
+#define MMC_VDD_22_23	0x00000400	/* VDD voltage 2.2 ~ 2.3 */
+#define MMC_VDD_23_24	0x00000800	/* VDD voltage 2.3 ~ 2.4 */
+#define MMC_VDD_24_25	0x00001000	/* VDD voltage 2.4 ~ 2.5 */
+#define MMC_VDD_25_26	0x00002000	/* VDD voltage 2.5 ~ 2.6 */
+#define MMC_VDD_26_27	0x00004000	/* VDD voltage 2.6 ~ 2.7 */
+#define MMC_VDD_27_28	0x00008000	/* VDD voltage 2.7 ~ 2.8 */
+#define MMC_VDD_28_29	0x00010000	/* VDD voltage 2.8 ~ 2.9 */
+#define MMC_VDD_29_30	0x00020000	/* VDD voltage 2.9 ~ 3.0 */
+#define MMC_VDD_30_31	0x00040000	/* VDD voltage 3.0 ~ 3.1 */
+#define MMC_VDD_31_32	0x00080000	/* VDD voltage 3.1 ~ 3.2 */
+#define MMC_VDD_32_33	0x00100000	/* VDD voltage 3.2 ~ 3.3 */
+#define MMC_VDD_33_34	0x00200000	/* VDD voltage 3.3 ~ 3.4 */
+#define MMC_VDD_34_35	0x00400000	/* VDD voltage 3.4 ~ 3.5 */
+#define MMC_VDD_35_36	0x00800000	/* VDD voltage 3.5 ~ 3.6 */
+#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
+
+
+/*
+ * CSD field definitions
+ */
+
+#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
+#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1       */
+
+#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
+
+#endif  /* MMC_MMC_PROTOCOL_H */
+