summaryrefslogtreecommitdiffstats
path: root/include/linux/libata.h
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2008-05-20 02:17:54 +0900
committerJeff Garzik <jgarzik@redhat.com>2008-07-14 15:59:32 -0400
commit87fbc5a060faf2394bee88a93519f9b9d434727c (patch)
tree6f90cacb1471e64051473c4e1e664b2dea8603e0 /include/linux/libata.h
parentd8af0eb6046c56e7238171ca420622541db24926 (diff)
downloadop-kernel-dev-87fbc5a060faf2394bee88a93519f9b9d434727c.zip
op-kernel-dev-87fbc5a060faf2394bee88a93519f9b9d434727c.tar.gz
libata: improve EH internal command timeout handling
ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'include/linux/libata.h')
-rw-r--r--include/linux/libata.h8
1 files changed, 7 insertions, 1 deletions
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9058c2a..035f8e1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -237,7 +237,6 @@ enum {
/* various lengths of time */
ATA_TMOUT_BOOT = 30000, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */
- ATA_TMOUT_INTERNAL = 30000,
ATA_TMOUT_INTERNAL_QUICK = 5000,
/* FIXME: GoVault needs 2s but we can't afford that without
@@ -341,6 +340,11 @@ enum {
SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */
+ /* This should match the actual table size of
+ * ata_eh_cmd_timeout_table in libata-eh.c.
+ */
+ ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5,
+
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
@@ -598,6 +602,8 @@ struct ata_eh_info {
struct ata_eh_context {
struct ata_eh_info i;
int tries[ATA_MAX_DEVICES];
+ int cmd_timeout_idx[ATA_MAX_DEVICES]
+ [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
unsigned int classes[ATA_MAX_DEVICES];
unsigned int did_probe_mask;
unsigned int saved_ncq_enabled;
OpenPOWER on IntegriCloud