Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 547 insertions, 0 deletions

diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
new file mode 100644
index 0000000..7a4eacd
--- /dev/null
+++ b/include/linux/isdnif.h
@@ -0,0 +1,547 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __ISDNIF_H__
+#define __ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+
+/***************************************************************************/
+/* Extensions made by Werner Cornelius (werner@ikt.de)                     */
+/*                                                                         */ 
+/* The proceed command holds a incoming call in a state to leave processes */
+/* enough time to check whether ist should be accepted.                    */
+/* The PROT_IO Command extends the interface to make protocol dependent    */
+/* features available (call diversion, call waiting...).                   */
+/*                                                                         */ 
+/* The PROT_IO Command is executed with the desired driver id and the arg  */
+/* parameter coded as follows:                                             */
+/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE    */
+/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
+/* Any additional data is protocol and command specific.                   */
+/* This mechanism also applies to the statcallb callback STAT_PROT.        */    
+/*                                                                         */
+/* This suggested extension permits an easy expansion of protocol specific */
+/* handling. Extensions may be added at any time without changing the HL   */
+/* driver code and not getting conflicts without certifications.           */
+/* The well known CAPI 2.0 interface handles such extensions in a similar  */
+/* way. Perhaps a protocol specific module may be added and separately     */
+/* loaded and linked to the basic isdn module for handling.                */                    
+/***************************************************************************/
+
+/*****************/
+/* DSS1 commands */ 
+/*****************/
+#define DSS1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_EURO)   /* invoke a supplementary service */
+#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO)   /* abort a invoke cmd */
+
+/*******************************/
+/* DSS1 Status callback values */
+/*******************************/
+#define DSS1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_EURO)   /* Result for invocation */
+#define DSS1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_EURO)   /* Error Return for invocation */
+#define DSS1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_EURO)   /* Deliver invoke broadcast info */
+
+
+/*********************************************************************/
+/* structures for DSS1 commands and callback                         */
+/*                                                                   */
+/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
+/* timeout, datalen and data fields must be set before calling.      */
+/*                                                                   */
+/* The return value is a positive hl_id value also delivered in the  */
+/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
+/* A negative return value signals errors in LL. So if the return    */
+/* value is <= 0 no action in LL will be taken -> request ignored    */
+/*                                                                   */
+/* The timeout field must be filled with a positive value specifying */
+/* the amount of time the INVOKED process waits for a reaction from  */
+/* the network.                                                      */
+/* If a response (either error or result) is received during this    */
+/* intervall, a reporting callback is initiated and the process will */
+/* be deleted, the hl identifier will be freed.                      */
+/* If no response is received during the specified intervall, a error*/
+/* callback is initiated with timeout set to -1 and a datalen set    */
+/* to 0.                                                             */
+/* If timeout is set to a value <= 0 during INVOCATION the process is*/
+/* immediately deleted after sending the data. No callback occurs !  */
+/*                                                                   */
+/* A currently waiting process may be aborted with INVOKE_ABORT. No  */
+/* callback will occur when a process has been aborted.              */
+/*                                                                   */
+/* Broadcast invoke frames from the network are reported via the     */
+/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
+/* are supplied by the network and not by the HL.                    */   
+/*********************************************************************/
+
+/*****************/
+/* NI1 commands */ 
+/*****************/
+#define NI1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_NI1)   /* invoke a supplementary service */
+#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1)   /* abort a invoke cmd */
+
+/*******************************/
+/* NI1 Status callback values */
+/*******************************/
+#define NI1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_NI1)   /* Result for invocation */
+#define NI1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_NI1)   /* Error Return for invocation */
+#define NI1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_NI1)   /* Deliver invoke broadcast info */
+
+typedef struct
+  { ulong ll_id; /* ID supplied by LL when executing    */
+		 /* a command and returned by HL for    */
+                 /* INVOKE_RES and INVOKE_ERR           */
+    int hl_id;   /* ID supplied by HL when called       */
+                 /* for executing a cmd and delivered   */
+                 /* for results and errors              */
+                 /* must be supplied by LL when aborting*/  
+    int proc;    /* invoke procedure used by CMD_INVOKE */
+                 /* returned by callback and broadcast  */ 
+    int timeout; /* timeout for INVOKE CMD in ms        */
+                 /* -1  in stat callback when timed out */
+                 /* error value when error callback     */
+    int datalen; /* length of cmd or stat data          */
+    u_char *data;/* pointer to data delivered or send   */
+  } isdn_cmd_stat;
+
+/*
+ * Commands from linklevel to lowlevel
+ *
+ */
+#define ISDN_CMD_IOCTL    0       /* Perform ioctl                         */
+#define ISDN_CMD_DIAL     1       /* Dial out                              */
+#define ISDN_CMD_ACCEPTD  2       /* Accept an incoming call on D-Chan.    */
+#define ISDN_CMD_ACCEPTB  3       /* Request B-Channel connect.            */
+#define ISDN_CMD_HANGUP   4       /* Hangup                                */
+#define ISDN_CMD_CLREAZ   5       /* Clear EAZ(s) of channel               */
+#define ISDN_CMD_SETEAZ   6       /* Set EAZ(s) of channel                 */
+#define ISDN_CMD_GETEAZ   7       /* Get EAZ(s) of channel                 */
+#define ISDN_CMD_SETSIL   8       /* Set Service-Indicator-List of channel */
+#define ISDN_CMD_GETSIL   9       /* Get Service-Indicator-List of channel */
+#define ISDN_CMD_SETL2   10       /* Set B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_GETL2   11       /* Get B-Chan. Layer2-Parameter          */
+#define ISDN_CMD_SETL3   12       /* Set B-Chan. Layer3-Parameter          */
+#define ISDN_CMD_GETL3   13       /* Get B-Chan. Layer3-Parameter          */
+// #define ISDN_CMD_LOCK    14       /* Signal usage by upper levels          */
+// #define ISDN_CMD_UNLOCK  15       /* Release usage-lock                    */
+#define ISDN_CMD_SUSPEND 16       /* Suspend connection                    */
+#define ISDN_CMD_RESUME  17       /* Resume connection                     */
+#define ISDN_CMD_PROCEED 18       /* Proceed with call establishment       */
+#define ISDN_CMD_ALERT   19       /* Alert after Proceeding                */
+#define ISDN_CMD_REDIR   20       /* Redir a incoming call                 */
+#define ISDN_CMD_PROT_IO 21       /* Protocol specific commands            */
+#define CAPI_PUT_MESSAGE 22       /* CAPI message send down or up          */
+#define ISDN_CMD_FAXCMD  23       /* FAX commands to HL-driver             */
+#define ISDN_CMD_AUDIO   24       /* DSP, DTMF, ... settings               */
+
+/*
+ * Status-Values delivered from lowlevel to linklevel via
+ * statcallb().
+ *
+ */
+#define ISDN_STAT_STAVAIL 256    /* Raw status-data available             */
+#define ISDN_STAT_ICALL   257    /* Incoming call detected                */
+#define ISDN_STAT_RUN     258    /* Signal protocol-code is running       */
+#define ISDN_STAT_STOP    259    /* Signal halt of protocol-code          */
+#define ISDN_STAT_DCONN   260    /* Signal D-Channel connect              */
+#define ISDN_STAT_BCONN   261    /* Signal B-Channel connect              */
+#define ISDN_STAT_DHUP    262    /* Signal D-Channel disconnect           */
+#define ISDN_STAT_BHUP    263    /* Signal B-Channel disconnect           */
+#define ISDN_STAT_CINF    264    /* Charge-Info                           */
+#define ISDN_STAT_LOAD    265    /* Signal new lowlevel-driver is loaded  */
+#define ISDN_STAT_UNLOAD  266    /* Signal unload of lowlevel-driver      */
+#define ISDN_STAT_BSENT   267    /* Signal packet sent                    */
+#define ISDN_STAT_NODCH   268    /* Signal no D-Channel                   */
+#define ISDN_STAT_ADDCH   269    /* Add more Channels                     */
+#define ISDN_STAT_CAUSE   270    /* Cause-Message                         */
+#define ISDN_STAT_ICALLW  271    /* Incoming call without B-chan waiting  */
+#define ISDN_STAT_REDIR   272    /* Redir result                          */
+#define ISDN_STAT_PROT    273    /* protocol IO specific callback         */
+#define ISDN_STAT_DISPLAY 274    /* deliver a received display message    */
+#define ISDN_STAT_L1ERR   275    /* Signal Layer-1 Error                  */
+#define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */
+#define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */
+#define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */
+
+/*
+ * Audio commands
+ */
+#define ISDN_AUDIO_SETDD	0	/* Set DTMF detection           */
+#define ISDN_AUDIO_DTMF		1	/* Rx/Tx DTMF                   */
+
+/*
+ * Values for errcode field
+ */
+#define ISDN_STAT_L1ERR_SEND 1
+#define ISDN_STAT_L1ERR_RECV 2
+
+/*
+ * Values for feature-field of interface-struct.
+ */
+/* Layer 2 */
+#define ISDN_FEATURE_L2_X75I    (0x0001 << ISDN_PROTO_L2_X75I)
+#define ISDN_FEATURE_L2_X75UI   (0x0001 << ISDN_PROTO_L2_X75UI)
+#define ISDN_FEATURE_L2_X75BUI  (0x0001 << ISDN_PROTO_L2_X75BUI)
+#define ISDN_FEATURE_L2_HDLC    (0x0001 << ISDN_PROTO_L2_HDLC)
+#define ISDN_FEATURE_L2_TRANS   (0x0001 << ISDN_PROTO_L2_TRANS)
+#define ISDN_FEATURE_L2_X25DTE  (0x0001 << ISDN_PROTO_L2_X25DTE)
+#define ISDN_FEATURE_L2_X25DCE  (0x0001 << ISDN_PROTO_L2_X25DCE)
+#define ISDN_FEATURE_L2_V11096  (0x0001 << ISDN_PROTO_L2_V11096)
+#define ISDN_FEATURE_L2_V11019  (0x0001 << ISDN_PROTO_L2_V11019)
+#define ISDN_FEATURE_L2_V11038  (0x0001 << ISDN_PROTO_L2_V11038)
+#define ISDN_FEATURE_L2_MODEM   (0x0001 << ISDN_PROTO_L2_MODEM)
+#define ISDN_FEATURE_L2_FAX	(0x0001 << ISDN_PROTO_L2_FAX)
+#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
+
+#define ISDN_FEATURE_L2_MASK    (0x0FFFF) /* Max. 16 protocols */
+#define ISDN_FEATURE_L2_SHIFT   (0)
+
+/* Layer 3 */
+#define ISDN_FEATURE_L3_TRANS   (0x10000 << ISDN_PROTO_L3_TRANS)
+#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
+#define ISDN_FEATURE_L3_FCLASS2	(0x10000 << ISDN_PROTO_L3_FCLASS2)
+#define ISDN_FEATURE_L3_FCLASS1	(0x10000 << ISDN_PROTO_L3_FCLASS1)
+
+#define ISDN_FEATURE_L3_MASK    (0x0FF0000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_L3_SHIFT   (16)
+
+/* Signaling */
+#define ISDN_FEATURE_P_UNKNOWN  (0x1000000 << ISDN_PTYPE_UNKNOWN)
+#define ISDN_FEATURE_P_1TR6     (0x1000000 << ISDN_PTYPE_1TR6)
+#define ISDN_FEATURE_P_EURO     (0x1000000 << ISDN_PTYPE_EURO)
+#define ISDN_FEATURE_P_NI1      (0x1000000 << ISDN_PTYPE_NI1)
+
+#define ISDN_FEATURE_P_MASK     (0x0FF000000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_P_SHIFT    (24)
+
+typedef struct setup_parm {
+    unsigned char phone[32];	/* Remote Phone-Number */
+    unsigned char eazmsn[32];	/* Local EAZ or MSN    */
+    unsigned char si1;      /* Service Indicator 1 */
+    unsigned char si2;      /* Service Indicator 2 */
+    unsigned char plan;     /* Numbering plan      */
+    unsigned char screen;   /* Screening info      */
+} setup_parm;
+
+
+#ifdef CONFIG_ISDN_TTY_FAX
+/* T.30 Fax G3 */
+
+#define FAXIDLEN 21
+
+typedef struct T30_s {
+	/* session parameters */
+	__u8 resolution		__attribute__ ((packed));
+	__u8 rate		__attribute__ ((packed));
+	__u8 width		__attribute__ ((packed));
+	__u8 length		__attribute__ ((packed));
+	__u8 compression	__attribute__ ((packed));
+	__u8 ecm		__attribute__ ((packed));
+	__u8 binary		__attribute__ ((packed));
+	__u8 scantime		__attribute__ ((packed));
+	__u8 id[FAXIDLEN]	__attribute__ ((packed));
+	/* additional parameters */
+	__u8 phase		__attribute__ ((packed));
+	__u8 direction		__attribute__ ((packed));
+	__u8 code		__attribute__ ((packed));
+	__u8 badlin		__attribute__ ((packed));
+	__u8 badmul		__attribute__ ((packed));
+	__u8 bor		__attribute__ ((packed));
+	__u8 fet		__attribute__ ((packed));
+	__u8 pollid[FAXIDLEN]	__attribute__ ((packed));
+	__u8 cq			__attribute__ ((packed));
+	__u8 cr			__attribute__ ((packed));
+	__u8 ctcrty		__attribute__ ((packed));
+	__u8 minsp		__attribute__ ((packed));
+	__u8 phcto		__attribute__ ((packed));
+	__u8 rel		__attribute__ ((packed));
+	__u8 nbc		__attribute__ ((packed));
+	/* remote station parameters */
+	__u8 r_resolution	__attribute__ ((packed));
+	__u8 r_rate		__attribute__ ((packed));
+	__u8 r_width		__attribute__ ((packed));
+	__u8 r_length		__attribute__ ((packed));
+	__u8 r_compression	__attribute__ ((packed));
+	__u8 r_ecm		__attribute__ ((packed));
+	__u8 r_binary		__attribute__ ((packed));
+	__u8 r_scantime		__attribute__ ((packed));
+	__u8 r_id[FAXIDLEN]	__attribute__ ((packed));
+	__u8 r_code		__attribute__ ((packed));
+} T30_s;
+
+#define ISDN_TTY_FAX_CONN_IN	0
+#define ISDN_TTY_FAX_CONN_OUT	1
+
+#define ISDN_TTY_FAX_FCON	0
+#define ISDN_TTY_FAX_DIS 	1
+#define ISDN_TTY_FAX_FTT 	2
+#define ISDN_TTY_FAX_MCF 	3
+#define ISDN_TTY_FAX_DCS 	4
+#define ISDN_TTY_FAX_TRAIN_OK	5
+#define ISDN_TTY_FAX_EOP 	6
+#define ISDN_TTY_FAX_EOM 	7
+#define ISDN_TTY_FAX_MPS 	8
+#define ISDN_TTY_FAX_DTC 	9
+#define ISDN_TTY_FAX_RID 	10
+#define ISDN_TTY_FAX_HNG 	11
+#define ISDN_TTY_FAX_DT  	12
+#define ISDN_TTY_FAX_FCON_I	13
+#define ISDN_TTY_FAX_DR  	14
+#define ISDN_TTY_FAX_ET  	15
+#define ISDN_TTY_FAX_CFR 	16
+#define ISDN_TTY_FAX_PTS 	17
+#define ISDN_TTY_FAX_SENT	18
+
+#define ISDN_FAX_PHASE_IDLE	0
+#define ISDN_FAX_PHASE_A	1
+#define ISDN_FAX_PHASE_B   	2
+#define ISDN_FAX_PHASE_C   	3
+#define ISDN_FAX_PHASE_D   	4
+#define ISDN_FAX_PHASE_E   	5
+
+#endif /* TTY_FAX */
+
+#define ISDN_FAX_CLASS1_FAE	0
+#define ISDN_FAX_CLASS1_FTS	1
+#define ISDN_FAX_CLASS1_FRS	2
+#define ISDN_FAX_CLASS1_FTM	3
+#define ISDN_FAX_CLASS1_FRM	4
+#define ISDN_FAX_CLASS1_FTH	5
+#define ISDN_FAX_CLASS1_FRH	6
+#define ISDN_FAX_CLASS1_CTRL	7
+
+#define ISDN_FAX_CLASS1_OK	0
+#define ISDN_FAX_CLASS1_CONNECT	1
+#define ISDN_FAX_CLASS1_NOCARR	2
+#define ISDN_FAX_CLASS1_ERROR	3
+#define ISDN_FAX_CLASS1_FCERROR	4
+#define ISDN_FAX_CLASS1_QUERY	5
+
+typedef struct {
+	__u8	cmd;
+	__u8	subcmd;
+	__u8	para[50];
+} aux_s;
+
+#define AT_COMMAND	0
+#define AT_EQ_VALUE	1
+#define AT_QUERY	2
+#define AT_EQ_QUERY	3
+
+/* CAPI structs */
+
+/* this is compatible to the old union size */
+#define MAX_CAPI_PARA_LEN 50
+
+typedef struct {
+	/* Header */
+	__u16 Length;
+	__u16 ApplId;
+	__u8 Command;
+	__u8 Subcommand;
+	__u16 Messagenumber;
+
+	/* Parameter */
+	union {
+		__u32 Controller;
+		__u32 PLCI;
+		__u32 NCCI;
+	} adr;
+	__u8 para[MAX_CAPI_PARA_LEN];
+} capi_msg;
+
+/*
+ * Structure for exchanging above infos
+ *
+ */
+typedef struct {
+	int   driver;		/* Lowlevel-Driver-ID            */
+	int   command;		/* Command or Status (see above) */
+	ulong arg;		/* Additional Data               */
+	union {
+		ulong errcode;	/* Type of error with STAT_L1ERR	*/
+		int length;	/* Amount of bytes sent with STAT_BSENT	*/
+		u_char num[50];	/* Additional Data			*/
+		setup_parm setup;/* For SETUP msg			*/
+		capi_msg cmsg;	/* For CAPI like messages		*/
+		char display[85];/* display message data		*/ 
+		isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result	*/
+		aux_s aux;	/* for modem commands/indications	*/
+#ifdef CONFIG_ISDN_TTY_FAX
+		T30_s	*fax;	/* Pointer to ttys fax struct		*/
+#endif
+		ulong userdata;	/* User Data */
+	} parm;
+} isdn_ctrl;
+
+#define dss1_io    isdn_io
+#define ni1_io     isdn_io
+
+/*
+ * The interface-struct itself (initialized at load-time of lowlevel-driver)
+ *
+ * See Documentation/isdn/INTERFACE for a description, how the communication
+ * between the ISDN subsystem and its drivers is done.
+ *
+ */
+typedef struct {
+  struct module *owner;
+
+  /* Number of channels supported by this driver
+   */
+  int channels;
+
+  /* 
+   * Maximum Size of transmit/receive-buffer this driver supports.
+   */
+  int maxbufsize;
+
+  /* Feature-Flags for this driver.
+   * See defines ISDN_FEATURE_... for Values
+   */
+  unsigned long features;
+
+  /*
+   * Needed for calculating
+   * dev->hard_header_len = linklayer header + hl_hdrlen;
+   * Drivers, not supporting sk_buff's should set this to 0.
+   */
+  unsigned short hl_hdrlen;
+
+  /*
+   * Receive-Callback using sk_buff's
+   * Parameters:
+   *             int                    Driver-ID
+   *             int                    local channel-number (0 ...)
+   *             struct sk_buff *skb    received Data
+   */
+  void (*rcvcallb_skb)(int, int, struct sk_buff *);
+
+  /* Status-Callback
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_STAT_... constants.
+   *                   arg     = depending on status-type.
+   *                   num     = depending on status-type.
+   */
+  int (*statcallb)(isdn_ctrl*);
+
+  /* Send command
+   * Parameters:
+   *             isdn_ctrl*
+   *                   driver  = Driver ID.
+   *                   command = One of above ISDN_CMD_... constants.
+   *                   arg     = depending on command.
+   *                   num     = depending on command.
+   */
+  int (*command)(isdn_ctrl*);
+
+  /*
+   * Send data using sk_buff's
+   * Parameters:
+   *             int                    driverId
+   *             int                    local channel-number (0...)
+   *             int                    Flag: Need ACK for this packet.
+   *             struct sk_buff *skb    Data to send
+   */
+  int (*writebuf_skb) (int, int, int, struct sk_buff *);
+
+  /* Send raw D-Channel-Commands
+   * Parameters:
+   *             u_char pointer data
+   *             int    length of data
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*writecmd)(const u_char __user *, int, int, int);
+
+  /* Read raw Status replies
+   *             u_char pointer data (volatile)
+   *             int    length of buffer
+   *             int    driverId
+   *             int    local channel-number (0 ...)
+   */
+  int (*readstat)(u_char __user *, int, int, int);
+
+  char id[20];
+} isdn_if;
+
+/*
+ * Function which must be called by lowlevel-driver at loadtime with
+ * the following fields of above struct set:
+ *
+ * channels     Number of channels that will be supported.
+ * hl_hdrlen    Space to preserve in sk_buff's when sending. Drivers, not
+ *              supporting sk_buff's should set this to 0.
+ * command      Address of Command-Handler.
+ * features     Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
+ * writebuf_skb Address of Skbuff-Send-Handler.
+ * writecmd        "    "  D-Channel  " which accepts raw D-Ch-Commands.
+ * readstat        "    "  D-Channel  " which delivers raw Status-Data.
+ *
+ * The linklevel-driver fills the following fields:
+ *
+ * channels      Driver-ID assigned to this driver. (Must be used on all
+ *               subsequent callbacks.
+ * rcvcallb_skb  Address of handler for received Skbuff's.
+ * statcallb        "    "     "    for status-changes.
+ *
+ */
+extern int register_isdn(isdn_if*);
+#include <asm/uaccess.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ISDNIF_H__ */