summaryrefslogtreecommitdiffstats
path: root/include/linux/iio
diff options
context:
space:
mode:
authorManuel Stahl <manuel.stahl@iis.fraunhofer.de>2013-02-01 08:51:00 +0000
committerJonathan Cameron <jic23@kernel.org>2013-02-02 09:33:33 +0000
commit9dbf091da080508e9f632d307f357beb79a0766b (patch)
tree4f3fe19f392e7b55b2c349cb6df65155ad98d0e8 /include/linux/iio
parent420b0fcb523b61eefb347317d3956db3249e968d (diff)
downloadop-kernel-dev-9dbf091da080508e9f632d307f357beb79a0766b.zip
op-kernel-dev-9dbf091da080508e9f632d307f357beb79a0766b.tar.gz
iio: gyro: Add itg3200
This patch adds support for the InvenSense itg3200. The itg3200 is a three-axis gyro with 16-bit ADC and I2C interface. Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'include/linux/iio')
-rw-r--r--include/linux/iio/gyro/itg3200.h154
1 files changed, 154 insertions, 0 deletions
diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h
new file mode 100644
index 0000000..c53f169
--- /dev/null
+++ b/include/linux/iio/gyro/itg3200.h
@@ -0,0 +1,154 @@
+/*
+ * itg3200.h -- support InvenSense ITG3200
+ * Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef I2C_ITG3200_H_
+#define I2C_ITG3200_H_
+
+#include <linux/iio/iio.h>
+
+/* Register with I2C address (34h) */
+#define ITG3200_REG_ADDRESS 0x00
+
+/* Sample rate divider
+ * Range: 0 to 255
+ * Default value: 0x00 */
+#define ITG3200_REG_SAMPLE_RATE_DIV 0x15
+
+/* Digital low pass filter settings */
+#define ITG3200_REG_DLPF 0x16
+/* DLPF full scale range */
+#define ITG3200_DLPF_FS_SEL_2000 0x18
+/* Bandwidth (Hz) and internal sample rate
+ * (kHz) of DLPF */
+#define ITG3200_DLPF_256_8 0x00
+#define ITG3200_DLPF_188_1 0x01
+#define ITG3200_DLPF_98_1 0x02
+#define ITG3200_DLPF_42_1 0x03
+#define ITG3200_DLPF_20_1 0x04
+#define ITG3200_DLPF_10_1 0x05
+#define ITG3200_DLPF_5_1 0x06
+
+#define ITG3200_DLPF_CFG_MASK 0x07
+
+/* Configuration for interrupt operations */
+#define ITG3200_REG_IRQ_CONFIG 0x17
+/* Logic level */
+#define ITG3200_IRQ_ACTIVE_LOW 0x80
+#define ITG3200_IRQ_ACTIVE_HIGH 0x00
+/* Drive type */
+#define ITG3200_IRQ_OPEN_DRAIN 0x40
+#define ITG3200_IRQ_PUSH_PULL 0x00
+/* Latch mode */
+#define ITG3200_IRQ_LATCH_UNTIL_CLEARED 0x20
+#define ITG3200_IRQ_LATCH_50US_PULSE 0x00
+/* Latch clear method */
+#define ITG3200_IRQ_LATCH_CLEAR_ANY 0x10
+#define ITG3200_IRQ_LATCH_CLEAR_STATUS 0x00
+/* Enable interrupt when device is ready */
+#define ITG3200_IRQ_DEVICE_RDY_ENABLE 0x04
+/* Enable interrupt when data is available */
+#define ITG3200_IRQ_DATA_RDY_ENABLE 0x01
+
+/* Determine the status of ITG-3200 interrupts */
+#define ITG3200_REG_IRQ_STATUS 0x1A
+/* Status of 'device is ready'-interrupt */
+#define ITG3200_IRQ_DEVICE_RDY_STATUS 0x04
+/* Status of 'data is available'-interrupt */
+#define ITG3200_IRQ_DATA_RDY_STATUS 0x01
+
+/* Sensor registers */
+#define ITG3200_REG_TEMP_OUT_H 0x1B
+#define ITG3200_REG_TEMP_OUT_L 0x1C
+#define ITG3200_REG_GYRO_XOUT_H 0x1D
+#define ITG3200_REG_GYRO_XOUT_L 0x1E
+#define ITG3200_REG_GYRO_YOUT_H 0x1F
+#define ITG3200_REG_GYRO_YOUT_L 0x20
+#define ITG3200_REG_GYRO_ZOUT_H 0x21
+#define ITG3200_REG_GYRO_ZOUT_L 0x22
+
+/* Power management */
+#define ITG3200_REG_POWER_MANAGEMENT 0x3E
+/* Reset device and internal registers to the
+ * power-up-default settings */
+#define ITG3200_RESET 0x80
+/* Enable low power sleep mode */
+#define ITG3200_SLEEP 0x40
+/* Put according gyroscope in standby mode */
+#define ITG3200_STANDBY_GYRO_X 0x20
+#define ITG3200_STANDBY_GYRO_Y 0x10
+#define ITG3200_STANDBY_GYRO_Z 0x08
+/* Determine the device clock source */
+#define ITG3200_CLK_INTERNAL 0x00
+#define ITG3200_CLK_GYRO_X 0x01
+#define ITG3200_CLK_GYRO_Y 0x02
+#define ITG3200_CLK_GYRO_Z 0x03
+#define ITG3200_CLK_EXT_32K 0x04
+#define ITG3200_CLK_EXT_19M 0x05
+
+
+/**
+ * struct itg3200 - device instance specific data
+ * @i2c: actual i2c_client
+ * @trig: data ready trigger from itg3200 pin
+ **/
+struct itg3200 {
+ struct i2c_client *i2c;
+ struct iio_trigger *trig;
+};
+
+enum ITG3200_SCAN_INDEX {
+ ITG3200_SCAN_TEMP,
+ ITG3200_SCAN_GYRO_X,
+ ITG3200_SCAN_GYRO_Y,
+ ITG3200_SCAN_GYRO_Z,
+ ITG3200_SCAN_ELEMENTS,
+};
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+ u8 reg_address, u8 val);
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+ u8 reg_address, u8 *val);
+
+
+#ifdef CONFIG_IIO_BUFFER
+
+void itg3200_remove_trigger(struct iio_dev *indio_dev);
+int itg3200_probe_trigger(struct iio_dev *indio_dev);
+
+int itg3200_buffer_configure(struct iio_dev *indio_dev);
+void itg3200_buffer_unconfigure(struct iio_dev *indio_dev);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline void itg3200_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+
+static inline int itg3200_probe_trigger(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+static inline int itg3200_buffer_configure(struct iio_dev *indio_dev)
+{
+ return 0;
+}
+
+static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev)
+{
+}
+
+#endif /* CONFIG_IIO_RING_BUFFER */
+
+#endif /* ITG3200_H_ */
OpenPOWER on IntegriCloud