UAPI: (Scripted) Disintegrate include/linux

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

1 files changed, 1 insertions, 135 deletions

diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29..89b4614 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
 #ifndef _LINUX_IF_ARP_H
 #define _LINUX_IF_ARP_H
 
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
-#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
-#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
-#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
-#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
-#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
-#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
-#define	ARPHRD_ARCNET	7		/* ARCnet			*/
-#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
-#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
-#define ARPHRD_ATM	19		/* ATM 				*/
-#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
-#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
-#define ARPHRD_EUI64	27		/* EUI-64                       */
-#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP	256
-#define ARPHRD_CSLIP	257
-#define ARPHRD_SLIP6	258
-#define ARPHRD_CSLIP6	259
-#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
-#define ARPHRD_ADAPT	264
-#define ARPHRD_ROSE	270
-#define ARPHRD_X25	271		/* CCITT X.25			*/
-#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
-#define ARPHRD_CAN	280		/* Controller Area Network      */
-#define ARPHRD_PPP	512
-#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
-#define ARPHRD_HDLC	ARPHRD_CISCO
-#define ARPHRD_LAPB	516		/* LAPB				*/
-#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
-#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
-
-#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
-#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
-#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
-#define ARPHRD_SKIP	771		/* SKIP vif			*/
-#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
-#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
-#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
-#define ARPHRD_BIF      775             /* AP1000 BIF                   */
-#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
-#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
-#define ARPHRD_IPGRE	778		/* GRE over IP			*/
-#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
-#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
-#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
-#define ARPHRD_ECONET	782		/* Acorn Econet			*/
-#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
-/* ARP works differently on different FC media .. so  */
-#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
-#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
-#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
-	/* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
-#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
-#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
-#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154	  804
-#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET	820		/* PhoNet media type		*/
-#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
-#define ARPHRD_CAIF	822		/* CAIF media type		*/
-#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
-
-#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
-#define ARPHRD_NONE	  0xFFFE	/* zero header length */
-
-/* ARP protocol opcodes. */
-#define	ARPOP_REQUEST	1		/* ARP request			*/
-#define	ARPOP_REPLY	2		/* ARP reply			*/
-#define	ARPOP_RREQUEST	3		/* RARP request			*/
-#define	ARPOP_RREPLY	4		/* RARP reply			*/
-#define	ARPOP_InREQUEST	8		/* InARP request		*/
-#define	ARPOP_InREPLY	9		/* InARP reply			*/
-#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
-
-
-/* ARP ioctl request. */
-struct arpreq {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-  char			arp_dev[16];
-};
-
-struct arpreq_old {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM		0x02		/* completed entry (ha valid)	*/
-#define	ATF_PERM	0x04		/* permanent entry		*/
-#define	ATF_PUBL	0x08		/* publish entry		*/
-#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
-#define ATF_NETMASK     0x20            /* want to use a netmask (only
-					   for proxy entries) */
-#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
-
-/*
- *	This structure defines an ethernet arp header.
- */
-
-struct arphdr {
-	__be16		ar_hrd;		/* format of hardware address	*/
-	__be16		ar_pro;		/* format of protocol address	*/
-	unsigned char	ar_hln;		/* length of hardware address	*/
-	unsigned char	ar_pln;		/* length of protocol address	*/
-	__be16		ar_op;		/* ARP opcode (command)		*/
-
-#if 0
-	 /*
-	  *	 Ethernet looks like this : This bit is variable sized however...
-	  */
-	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
-	unsigned char		ar_sip[4];		/* sender IP address		*/
-	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
-	unsigned char		ar_tip[4];		/* target IP address		*/
-#endif
-
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
 
 static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
 {
@@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev)
 	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
 	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
 }
-#endif
-
 #endif	/* _LINUX_IF_ARP_H */