diff options
| author | Stefan Rompf <stefan@loplof.de> | 2006-03-20 17:09:11 -0800 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2006-03-20 17:09:11 -0800 |
| commit | b00055aacdb172c05067612278ba27265fcd05ce (patch) | |
| tree | 4dbbee11b02d54cc0978113dfb07c53fdce17aa8 /include/linux/if.h | |
| parent | e843b9e1bec4a953d848a319da6a18ca5c667f55 (diff) | |
| download | op-kernel-dev-b00055aacdb172c05067612278ba27265fcd05ce.zip op-kernel-dev-b00055aacdb172c05067612278ba27265fcd05ce.tar.gz | |
[NET] core: add RFC2863 operstate
this patch adds a dormant flag to network devices, RFC2863 operstate derived
from these flags and possibility for userspace interaction. It allows drivers
to signal that a device is unusable for user traffic without disabling
queueing (and therefore the possibility for protocol establishment traffic to
flow) and a userspace supplicant (WPA, 802.1X) to mark a device unusable
without changes to the driver.
It is the result of our long discussion. However I must admit that it
represents what Jamal and I agreed on with compromises towards Krzysztof, but
Thomas and Krzysztof still disagree with some parts. Anyway I think it should
be applied.
Signed-off-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux/if.h')
| -rw-r--r-- | include/linux/if.h | 26 |
1 files changed, 23 insertions, 3 deletions
diff --git a/include/linux/if.h b/include/linux/if.h index 12c6f6d..374e20a 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -33,7 +33,7 @@ #define IFF_LOOPBACK 0x8 /* is a loopback net */ #define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ #define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface running and carrier ok */ +#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ #define IFF_NOARP 0x80 /* no ARP protocol */ #define IFF_PROMISC 0x100 /* receive all packets */ #define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ @@ -43,12 +43,16 @@ #define IFF_MULTICAST 0x1000 /* Supports multicast */ -#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING) - #define IFF_PORTSEL 0x2000 /* can set media type */ #define IFF_AUTOMEDIA 0x4000 /* auto media select active */ #define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ +#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ +#define IFF_DORMANT 0x20000 /* driver signals dormant */ + +#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|\ + IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) + /* Private (from user) interface flags (netdevice->priv_flags). */ #define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ #define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ @@ -83,6 +87,22 @@ #define IF_PROTO_FR_ETH_PVC 0x200B #define IF_PROTO_RAW 0x200C /* RAW Socket */ +/* RFC 2863 operational status */ +enum { + IF_OPER_UNKNOWN, + IF_OPER_NOTPRESENT, + IF_OPER_DOWN, + IF_OPER_LOWERLAYERDOWN, + IF_OPER_TESTING, + IF_OPER_DORMANT, + IF_OPER_UP, +}; + +/* link modes */ +enum { + IF_LINK_MODE_DEFAULT, + IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ +}; /* * Device mapping structure. I'd just gone off and designed a |
