Merge branch 'for-2.6.36' into for-2.6.37

Fairly simple conflicts, the most serious ones are the i.MX ones which I
suspect now need another rename.

Conflicts:
	arch/arm/mach-mx2/clock_imx27.c
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/mach-omap2/board-zoom2.c
	sound/soc/fsl/mpc5200_dma.c
	sound/soc/fsl/mpc5200_dma.h
	sound/soc/fsl/mpc8610_hpcd.c
	sound/soc/pxa/spitz.c

7 files changed, 255 insertions, 24 deletions

diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index 02c9af3..269181b 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -78,6 +78,40 @@
 
 #define ADP5588_KEYMAPSIZE	80
 
+#define GPI_PIN_ROW0 97
+#define GPI_PIN_ROW1 98
+#define GPI_PIN_ROW2 99
+#define GPI_PIN_ROW3 100
+#define GPI_PIN_ROW4 101
+#define GPI_PIN_ROW5 102
+#define GPI_PIN_ROW6 103
+#define GPI_PIN_ROW7 104
+#define GPI_PIN_COL0 105
+#define GPI_PIN_COL1 106
+#define GPI_PIN_COL2 107
+#define GPI_PIN_COL3 108
+#define GPI_PIN_COL4 109
+#define GPI_PIN_COL5 110
+#define GPI_PIN_COL6 111
+#define GPI_PIN_COL7 112
+#define GPI_PIN_COL8 113
+#define GPI_PIN_COL9 114
+
+#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
+#define GPI_PIN_ROW_END GPI_PIN_ROW7
+#define GPI_PIN_COL_BASE GPI_PIN_COL0
+#define GPI_PIN_COL_END GPI_PIN_COL9
+
+#define GPI_PIN_BASE GPI_PIN_ROW_BASE
+#define GPI_PIN_END GPI_PIN_COL_END
+
+#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
+
+struct adp5588_gpi_map {
+	unsigned short pin;
+	unsigned short sw_evt;
+};
+
 struct adp5588_kpad_platform_data {
 	int rows;			/* Number of rows */
 	int cols;			/* Number of columns */
@@ -87,6 +121,9 @@ struct adp5588_kpad_platform_data {
 	unsigned en_keylock:1;		/* Enable Key Lock feature */
 	unsigned short unlock_key1;	/* Unlock Key 1 */
 	unsigned short unlock_key2;	/* Unlock Key 2 */
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+	const struct adp5588_gpio_platform_data *gpio_data;
 };
 
 struct adp5588_gpio_platform_data {
diff --git a/include/linux/i2c/ltc4245.h b/include/linux/i2c/ltc4245.h
new file mode 100644
index 0000000..56bda4b
--- /dev/null
+++ b/include/linux/i2c/ltc4245.h
@@ -0,0 +1,21 @@
+/*
+ * Platform Data for LTC4245 hardware monitor chip
+ *
+ * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef LINUX_LTC4245_H
+#define LINUX_LTC4245_H
+
+#include <linux/types.h>
+
+struct ltc4245_platform_data {
+	bool use_extra_gpios;
+};
+
+#endif /* LINUX_LTC4245_H */
diff --git a/include/linux/i2c/mcs.h b/include/linux/i2c/mcs.h
new file mode 100644
index 0000000..725ae7c
--- /dev/null
+++ b/include/linux/i2c/mcs.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS_H
+#define __LINUX_MCS_H
+
+#define MCS_KEY_MAP(v, c)	((((v) & 0xff) << 16) | ((c) & 0xffff))
+#define MCS_KEY_VAL(v)		(((v) >> 16) & 0xff)
+#define MCS_KEY_CODE(v)		((v) & 0xffff)
+
+struct mcs_platform_data {
+	void (*cfg_pin)(void);
+
+	/* touchscreen */
+	unsigned int x_size;
+	unsigned int y_size;
+
+	/* touchkey */
+	const u32 *keymap;
+	unsigned int keymap_size;
+	unsigned int key_maxval;
+	bool no_autorepeat;
+};
+
+#endif	/* __LINUX_MCS_H */
diff --git a/include/linux/i2c/mcs5000_ts.h b/include/linux/i2c/mcs5000_ts.h
deleted file mode 100644
index 5a117b5..0000000
--- a/include/linux/i2c/mcs5000_ts.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * mcs5000_ts.h
- *
- * Copyright (C) 2009 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MCS5000_TS_H
-#define __LINUX_MCS5000_TS_H
-
-/* platform data for the MELFAS MCS-5000 touchscreen driver */
-struct mcs5000_ts_platform_data {
-	void (*cfg_pin)(void);
-	int x_size;
-	int y_size;
-};
-
-#endif	/* __LINUX_MCS5000_TS_H */
diff --git a/include/linux/i2c/pca954x.h b/include/linux/i2c/pca954x.h
new file mode 100644
index 0000000..28f1f8d
--- /dev/null
+++ b/include/linux/i2c/pca954x.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pca954x.h - I2C multiplexer/switch support
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ * Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#ifndef _LINUX_I2C_PCA954X_H
+#define _LINUX_I2C_PCA954X_H
+
+/* Platform data for the PCA954x I2C multiplexers */
+
+/* Per channel initialisation data:
+ * @adap_id: bus number for the adapter. 0 = don't care
+ * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
+ *                    of this channel after transaction.
+ *
+ */
+struct pca954x_platform_mode {
+	int		adap_id;
+	unsigned int	deselect_on_exit:1;
+};
+
+/* Per mux/switch data, used with i2c_register_board_info */
+struct pca954x_platform_data {
+	struct pca954x_platform_mode *modes;
+	int num_modes;
+};
+
+#endif /* _LINUX_I2C_PCA954X_H */
diff --git a/include/linux/i2c/qt602240_ts.h b/include/linux/i2c/qt602240_ts.h
new file mode 100644
index 0000000..c5033e1
--- /dev/null
+++ b/include/linux/i2c/qt602240_ts.h
@@ -0,0 +1,38 @@
+/*
+ * AT42QT602240/ATMXT224 Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_QT602240_TS_H
+#define __LINUX_QT602240_TS_H
+
+/* Orient */
+#define QT602240_NORMAL			0x0
+#define QT602240_DIAGONAL		0x1
+#define QT602240_HORIZONTAL_FLIP	0x2
+#define QT602240_ROTATED_90_COUNTER	0x3
+#define QT602240_VERTICAL_FLIP		0x4
+#define QT602240_ROTATED_90		0x5
+#define QT602240_ROTATED_180		0x6
+#define QT602240_DIAGONAL_COUNTER	0x7
+
+/* The platform data for the AT42QT602240/ATMXT224 touchscreen driver */
+struct qt602240_platform_data {
+	unsigned int x_line;
+	unsigned int y_line;
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int blen;
+	unsigned int threshold;
+	unsigned int voltage;
+	unsigned char orient;
+};
+
+#endif /* __LINUX_QT602240_TS_H */
diff --git a/include/linux/i2c/sx150x.h b/include/linux/i2c/sx150x.h
new file mode 100644
index 0000000..ee3049c
--- /dev/null
+++ b/include/linux/i2c/sx150x.h
@@ -0,0 +1,78 @@
+/*
+ * Driver for the Semtech SX150x I2C GPIO Expanders
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __LINUX_I2C_SX150X_H
+#define __LINUX_I2C_SX150X_H
+
+/**
+ * struct sx150x_platform_data - config data for SX150x driver
+ * @gpio_base: The index number of the first GPIO assigned to this
+ *             GPIO expander.  The expander will create a block of
+ *             consecutively numbered gpios beginning at the given base,
+ *             with the size of the block depending on the model of the
+ *             expander chip.
+ * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
+ *                instead of as an oscillator, increasing the size of the
+ *                GP(I)O pool created by this expander by one.  The
+ *                output-only GPO pin will be added at the end of the block.
+ * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
+ *                 for each IO line in the expander.  Setting the bit at
+ *                 position n will enable the pull-up for the IO at
+ *                 the corresponding offset.  For chips with fewer than
+ *                 16 IO pins, high-end bits are ignored.
+ * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
+ *                 resistor for each IO line in the expander. Setting the
+ *                 bit at position n will enable the pull-down for the IO at
+ *                 the corresponding offset.  For chips with fewer than
+ *                 16 IO pins, high-end bits are ignored.
+ * @io_open_drain_ena: A bit-mask which enables-or disables open-drain
+ *                     operation for each IO line in the expander. Setting the
+ *                     bit at position n enables open-drain operation for
+ *                     the IO at the corresponding offset.  Clearing the bit
+ *                     enables regular push-pull operation for that IO.
+ *                     For chips with fewer than 16 IO pins, high-end bits
+ *                     are ignored.
+ * @io_polarity: A bit-mask which enables polarity inversion for each IO line
+ *               in the expander.  Setting the bit at position n inverts
+ *               the polarity of that IO line, while clearing it results
+ *               in normal polarity. For chips with fewer than 16 IO pins,
+ *               high-end bits are ignored.
+ * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
+ *               is connected, via which it reports interrupt events
+ *               across all GPIO lines.  This must be a real,
+ *               pre-existing IRQ line.
+ *               Setting this value < 0 disables the irq_chip functionality
+ *               of the driver.
+ * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
+ *            IRQ lines will appear.  Similarly to gpio_base, the expander
+ *            will create a block of irqs beginning at this number.
+ *            This value is ignored if irq_summary is < 0.
+ */
+struct sx150x_platform_data {
+	unsigned gpio_base;
+	bool     oscio_is_gpo;
+	u16      io_pullup_ena;
+	u16      io_pulldn_ena;
+	u16      io_open_drain_ena;
+	u16      io_polarity;
+	int      irq_summary;
+	unsigned irq_base;
+};
+
+#endif /* __LINUX_I2C_SX150X_H */