gpio: split gpiod board registration into machine header

As per example from the regulator subsystem: put all defines and
functions related to registering board info for GPIO descriptors
into a separate <linux/gpio/machine.h> header.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 58 insertions, 0 deletions

diff --git a/include/linux/gpio/machine.h b/include/linux/gpio/machine.h
new file mode 100644
index 0000000..b8ad87f
--- /dev/null
+++ b/include/linux/gpio/machine.h
@@ -0,0 +1,58 @@
+#ifndef __LINUX_GPIO_MACHINE_H
+#define __LINUX_GPIO_MACHINE_H
+
+enum gpio_lookup_flags {
+	GPIO_ACTIVE_HIGH = (0 << 0),
+	GPIO_ACTIVE_LOW = (1 << 0),
+	GPIO_OPEN_DRAIN = (1 << 1),
+	GPIO_OPEN_SOURCE = (1 << 2),
+};
+
+/**
+ * struct gpiod_lookup - lookup table
+ * @chip_label: name of the chip the GPIO belongs to
+ * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
+ * @con_id: name of the GPIO from the device's point of view
+ * @idx: index of the GPIO in case several GPIOs share the same name
+ * @flags: mask of GPIO_* values
+ *
+ * gpiod_lookup is a lookup table for associating GPIOs to specific devices and
+ * functions using platform data.
+ */
+struct gpiod_lookup {
+	const char *chip_label;
+	u16 chip_hwnum;
+	const char *con_id;
+	unsigned int idx;
+	enum gpio_lookup_flags flags;
+};
+
+struct gpiod_lookup_table {
+	struct list_head list;
+	const char *dev_id;
+	struct gpiod_lookup table[];
+};
+
+/*
+ * Simple definition of a single GPIO under a con_id
+ */
+#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
+	GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
+
+/*
+ * Use this macro if you need to have several GPIOs under the same con_id.
+ * Each GPIO needs to use a different index and can be accessed using
+ * gpiod_get_index()
+ */
+#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags)  \
+{                                                                         \
+	.chip_label = _chip_label,                                        \
+	.chip_hwnum = _chip_hwnum,                                        \
+	.con_id = _con_id,                                                \
+	.idx = _idx,                                                      \
+	.flags = _flags,                                                  \
+}
+
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
+
+#endif /* __LINUX_GPIO_MACHINE_H */