Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc clock driver changes from Olof Johansson:
 "The new clock subsystem was merged in linux-3.4 without any users,
  this now moves the first three platforms over to it: imx, mxs and
  spear.

  The series also contains the changes for the clock subsystem itself,
  since Mike preferred to have it together with the platforms that
  require these changes, in order to avoid interdependencies and
  conflicts."

Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code
removed in one branch, added OF support in another) and
drivers/dma/imx-sdma.c (independent changes next to each other).

* tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate().
  clk: Provide dummy clk_unregister()
  SPEAr: Update defconfigs
  SPEAr: Add SMI NOR partition info in dts files
  SPEAr: Switch to common clock framework
  SPEAr: Call clk_prepare() before calling clk_enable
  SPEAr: clk: Add General Purpose Timer Synthesizer clock
  SPEAr: clk: Add Fractional Synthesizer clock
  SPEAr: clk: Add Auxiliary Synthesizer clock
  SPEAr: clk: Add VCO-PLL Synthesizer clock
  SPEAr: Add DT bindings for SPEAr's timer
  ARM i.MX: remove now unused clock files
  ARM: i.MX6: implement clocks using common clock framework
  ARM i.MX35: implement clocks using common clock framework
  ARM i.MX5: implement clocks using common clock framework
  ARM: Kirkwood: Replace clock gating
  ARM: Orion: Audio: Add clk/clkdev support
  ARM: Orion: PCIE: Add support for clk
  ARM: Orion: XOR: Add support for clk
  ARM: Orion: CESA: Add support for clk
  ...

1 files changed, 79 insertions, 41 deletions

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 5508897..4a0b483 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -15,19 +15,6 @@
 
 #ifdef CONFIG_COMMON_CLK
 
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure.  struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
-	struct clk *clk;
-};
-
 /*
  * flags used across common struct clk.  these flags should only affect the
  * top-level framework.  custom flags for dealing with hardware specifics
@@ -39,6 +26,8 @@ struct clk_hw {
 #define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
 #define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
 
+struct clk_hw;
+
 /**
  * struct clk_ops -  Callback operations for hardware clocks; these are to
  * be provided by the clock implementation, and will be called by drivers
@@ -88,19 +77,11 @@ struct clk_hw {
  * 		array index into the value programmed into the hardware.
  * 		Returns 0 on success, -EERROR otherwise.
  *
- * @set_rate:	Change the rate of this clock. If this callback returns
- * 		CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * 		parent clock (which may propagate again if the parent clock
- * 		also sets this flag). The requested rate of the parent is
- * 		passed back from the callback in the second 'unsigned long *'
- * 		argument.  Note that it is up to the hardware clock's set_rate
- * 		implementation to insure that clocks do not run out of spec
- * 		when propgating the call to set_rate up to the parent.  One way
- * 		to do this is to gate the clock (via clk_disable and/or
- * 		clk_unprepare) before calling clk_set_rate, then ungating it
- * 		afterward.  If your clock also has the CLK_GATE_SET_RATE flag
- * 		set then this will insure safety.  Returns 0 on success,
- * 		-EERROR otherwise.
+ * @set_rate:	Change the rate of this clock. The requested rate is specified
+ *		by the second argument, which should typically be the return
+ *		of .round_rate call.  The third argument gives the parent rate
+ *		which is likely helpful for most .set_rate implementation.
+ *		Returns 0 on success, -EERROR otherwise.
  *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
@@ -125,10 +106,46 @@ struct clk_ops {
 					unsigned long *);
 	int		(*set_parent)(struct clk_hw *hw, u8 index);
 	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long);
+	int		(*set_rate)(struct clk_hw *hw, unsigned long,
+				    unsigned long);
 	void		(*init)(struct clk_hw *hw);
 };
 
+/**
+ * struct clk_init_data - holds init data that's common to all clocks and is
+ * shared between the clock provider and the common clock framework.
+ *
+ * @name: clock name
+ * @ops: operations this clock supports
+ * @parent_names: array of string names for all possible parents
+ * @num_parents: number of possible parents
+ * @flags: framework-level hints and quirks
+ */
+struct clk_init_data {
+	const char		*name;
+	const struct clk_ops	*ops;
+	const char		**parent_names;
+	u8			num_parents;
+	unsigned long		flags;
+};
+
+/**
+ * struct clk_hw - handle for traversing from a struct clk to its corresponding
+ * hardware-specific structure.  struct clk_hw should be declared within struct
+ * clk_foo and then referenced by the struct clk instance that uses struct
+ * clk_foo's clk_ops
+ *
+ * @clk: pointer to the struct clk instance that points back to this struct
+ * clk_hw instance
+ *
+ * @init: pointer to struct clk_init_data that contains the init data shared
+ * with the common clock framework.
+ */
+struct clk_hw {
+	struct clk *clk;
+	struct clk_init_data *init;
+};
+
 /*
  * DOC: Basic clock implementations common to many platforms
  *
@@ -149,6 +166,7 @@ struct clk_fixed_rate {
 	u8		flags;
 };
 
+extern const struct clk_ops clk_fixed_rate_ops;
 struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned long fixed_rate);
@@ -165,7 +183,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
  * Clock which can gate its output.  Implements .enable & .disable
  *
  * Flags:
- * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
+ * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to
  * 	enable the clock.  Setting this flag does the opposite: setting the bit
  * 	disable the clock and clearing it enables the clock
  */
@@ -175,11 +193,11 @@ struct clk_gate {
 	u8		bit_idx;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
 };
 
 #define CLK_GATE_SET_TO_DISABLE		BIT(0)
 
+extern const struct clk_ops clk_gate_ops;
 struct clk *clk_register_gate(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx,
@@ -212,12 +230,12 @@ struct clk_divider {
 	u8		width;
 	u8		flags;
 	spinlock_t	*lock;
-	char		*parent[1];
 };
 
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 
+extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -238,7 +256,7 @@ struct clk *clk_register_divider(struct device *dev, const char *name,
  *
  * Flags:
  * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
- * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
+ * CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
  */
 struct clk_mux {
 	struct clk_hw	hw;
@@ -252,29 +270,49 @@ struct clk_mux {
 #define CLK_MUX_INDEX_ONE		BIT(0)
 #define CLK_MUX_INDEX_BIT		BIT(1)
 
+extern const struct clk_ops clk_mux_ops;
 struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
+		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock);
 
 /**
+ * struct clk_fixed_factor - fixed multiplier and divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mult:	multiplier
+ * @div:	divider
+ *
+ * Clock with a fixed multiplier and divider. The output frequency is the
+ * parent clock rate divided by div and multiplied by mult.
+ * Implements .recalc_rate, .set_rate and .round_rate
+ */
+
+struct clk_fixed_factor {
+	struct clk_hw	hw;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+extern struct clk_ops clk_fixed_factor_ops;
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+		const char *parent_name, unsigned long flags,
+		unsigned int mult, unsigned int div);
+
+/**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
  * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
  *
  * clk_register is the primary interface for populating the clock tree with new
  * clock nodes.  It returns a pointer to the newly allocated struct clk which
  * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
+ * rest of the clock API.  In the event of an error clk_register will return an
+ * error code; drivers must test for an error code after calling clk_register.
  */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags);
+struct clk *clk_register(struct device *dev, struct clk_hw *hw);
+
+void clk_unregister(struct clk *clk);
 
 /* helper functions */
 const char *__clk_get_name(struct clk *clk);