diff options
| author | Mark Lord <liml@rtr.ca> | 2007-04-17 18:26:07 -0400 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2007-04-28 14:40:40 -0400 |
| commit | 169439c2e35f01e7832a9b4fc8a7446980c3d593 (patch) | |
| tree | 83cbc6898be74b2bfb49bd4eaa966913c49de9da /include/linux/ata.h | |
| parent | 1e999736cafdffc374f22eed37b291129ef82e4e (diff) | |
| download | op-kernel-dev-169439c2e35f01e7832a9b4fc8a7446980c3d593.zip op-kernel-dev-169439c2e35f01e7832a9b4fc8a7446980c3d593.tar.gz | |
libata: Handle drives that require a spin-up command before first access
(S)ATA drives can be configured for "power-up in standby",
a mode whereby a specific "spin up now!" command is required
before the first media access.
Currently, a drive with this feature enabled can not be used at all
with libata, and once in this mode, the drive becomes a doorstop.
The older drivers/ide subsystem at least enumerates the drive,
so that it can be woken up after the fact from a userspace HDIO_*
command, but not libata.
This patch adds support to libata for the "power-up in standby"
mode where a "spin up now!" command (SET_FEATURES) is needed.
With this, libata will recognize such drives, spin them up,
and then re-IDENTIFY them if necessary to get a full/complete
set of drive features data.
Drives in this state are determined by looking for
special values in id[2], as documented in the current ATA specs.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'include/linux/ata.h')
| -rw-r--r-- | include/linux/ata.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/include/linux/ata.h b/include/linux/ata.h index f4dc8df..edb31bf 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -202,6 +202,8 @@ enum { SETFEATURES_WC_ON = 0x02, /* Enable write cache */ SETFEATURES_WC_OFF = 0x82, /* Disable write cache */ + SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: |
