diff options
| author | Damien Le Moal <damien.lemoal@hgst.com> | 2016-04-04 12:17:09 -0400 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2016-04-04 12:17:09 -0400 |
| commit | 974e0a4537f556867483f493c7f67ccdcb7fc504 (patch) | |
| tree | 44ec7451b86d0778c7a2b4b4a7ba5eb558f6bf39 /include/linux/ata.h | |
| parent | d991c872ac7ffaacc4df93efbfbcb4189cee6440 (diff) | |
| download | op-kernel-dev-974e0a4537f556867483f493c7f67ccdcb7fc504.zip op-kernel-dev-974e0a4537f556867483f493c7f67ccdcb7fc504.tar.gz | |
libata-core: Allow longer timeout for drive spinup from PUIS
When spinning up a drive from powered on standby mode (PUIS),
SETFEATURES_SPINUP is executed with the default timeout used
for any SETFEATURES subcommand, that is 5+10 seconds. The
total 15s is too short for some drives to complete spinup
(e.g. drives with a large indirection table stored on media),
resulting in ata_dev_read_id to fail twice on the execution
of SETFEATURES_SPINUP. For this feature, allow a larger
default timeout of 30 seconds. However, in the same spirit
as with the timeout of other feature subcommands, do not
ignore ata_probe_timeout if it is set).
Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'include/linux/ata.h')
| -rw-r--r-- | include/linux/ata.h | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/include/linux/ata.h b/include/linux/ata.h index c1a2f34..f310ec0 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -371,7 +371,8 @@ enum { SETFEATURES_AAM_ON = 0x42, SETFEATURES_AAM_OFF = 0xC2, - SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + SETFEATURES_SPINUP = 0x07, /* Spin-up drive */ + SETFEATURES_SPINUP_TIMEOUT = 30000, /* 30s timeout for drive spin-up from PUIS */ SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */ SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */ |
