summaryrefslogtreecommitdiffstats
path: root/include/linux/amba
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@stericsson.com>2010-05-07 08:40:53 +0000
committerGrant Likely <grant.likely@secretlab.ca>2010-05-25 00:23:14 -0600
commit781c7b129b1beb876905f7212927aa0ee1b022e5 (patch)
tree678bfc0d0a5cdd24c55024b5c2d2674eb5bea572 /include/linux/amba
parent556f4aeb7d9dfac8573d0281dd555bd3210d8366 (diff)
downloadop-kernel-dev-781c7b129b1beb876905f7212927aa0ee1b022e5.zip
op-kernel-dev-781c7b129b1beb876905f7212927aa0ee1b022e5.tar.gz
spi/pl022: add support for the PL023 derivate
This adds support for a further ST variant of the PL022 called PL023. Some differences in the control registers due to being stripped down to SPI mode only, and a new clock feedback sample delay config setting is available. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'include/linux/amba')
-rw-r--r--include/linux/amba/pl022.h32
1 files changed, 30 insertions, 2 deletions
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index 612f399..abf26cc 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -182,8 +182,8 @@ enum ssp_microwire_wait_state {
};
/**
- * enum Microwire - whether Full/Half Duplex, only available
- * in the ST Micro variant.
+ * enum ssp_duplex - whether Full/Half Duplex on microwire, only
+ * available in the ST Micro variant.
* @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
* SSPRXD not used
* @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
@@ -195,6 +195,31 @@ enum ssp_duplex {
};
/**
+ * enum ssp_clkdelay - an optional clock delay on the feedback clock
+ * only available in the ST Micro PL023 variant.
+ * @SSP_FEEDBACK_CLK_DELAY_NONE: no delay, the data coming in from the
+ * slave is sampled directly
+ * @SSP_FEEDBACK_CLK_DELAY_1T: the incoming slave data is sampled with
+ * a delay of T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_2T: dito with a delay if 2T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_3T: dito with a delay if 3T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_4T: dito with a delay if 4T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_5T: dito with a delay if 5T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_6T: dito with a delay if 6T-dt
+ * @SSP_FEEDBACK_CLK_DELAY_7T: dito with a delay if 7T-dt
+ */
+enum ssp_clkdelay {
+ SSP_FEEDBACK_CLK_DELAY_NONE,
+ SSP_FEEDBACK_CLK_DELAY_1T,
+ SSP_FEEDBACK_CLK_DELAY_2T,
+ SSP_FEEDBACK_CLK_DELAY_3T,
+ SSP_FEEDBACK_CLK_DELAY_4T,
+ SSP_FEEDBACK_CLK_DELAY_5T,
+ SSP_FEEDBACK_CLK_DELAY_6T,
+ SSP_FEEDBACK_CLK_DELAY_7T
+};
+
+/**
* CHIP select/deselect commands
*/
enum ssp_chip_select {
@@ -237,6 +262,8 @@ struct pl022_ssp_controller {
* @ctrl_len: Microwire interface: Control length
* @wait_state: Microwire interface: Wait state
* @duplex: Microwire interface: Full/Half duplex
+ * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
+ * before sampling the incoming line
* @cs_control: function pointer to board-specific function to
* assert/deassert I/O port to control HW generation of devices chip-select.
* @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
@@ -260,6 +287,7 @@ struct pl022_config_chip {
enum ssp_microwire_ctrl_len ctrl_len;
enum ssp_microwire_wait_state wait_state;
enum ssp_duplex duplex;
+ enum ssp_clkdelay clkdelay;
void (*cs_control) (u32 control);
};
OpenPOWER on IntegriCloud