summaryrefslogtreecommitdiffstats
path: root/include/dt-bindings/pinctrl
diff options
context:
space:
mode:
authorMarek Roszko <mark.roszko@gmail.com>2014-08-23 23:12:04 -0400
committerLinus Walleij <linus.walleij@linaro.org>2014-09-05 10:32:06 +0200
commit4334ac2db2be9e278c95fd15260c1f49f698ffc5 (patch)
treeb6e13a3fda5d1c41495b697abfb0c0a31eff52c3 /include/dt-bindings/pinctrl
parent0d37899363b0e5486f8800231b7edd75e8b60942 (diff)
downloadop-kernel-dev-4334ac2db2be9e278c95fd15260c1f49f698ffc5.zip
op-kernel-dev-4334ac2db2be9e278c95fd15260c1f49f698ffc5.tar.gz
pinctrl: at91: add drive strength configuration
The SAMA5 and SAM9x5 series both have drive strength options for the PIOs. This patch adds the ability to set one of three hardware options for drive strengths of low, medium or high for the each pin. The actual current output of the chip based on the setting is defined in the datasheets and varies per pins separate from banks and with supply voltage. This patch adds three new dt-bindings that allow setting the strength when configuring pins. By default, no change will be made to the drive strength of a pin from its reset value. Due to the difference between the register addresses of the SAMA5 and SAM9x5 series, a new sama5d3-pinctrl id was added. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/dt-bindings/pinctrl')
-rw-r--r--include/dt-bindings/pinctrl/at91.h5
1 files changed, 5 insertions, 0 deletions
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 0fee6ff..bbca3d0 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -20,6 +20,11 @@
#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
+#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5)
+
#define AT91_PIOA 0
#define AT91_PIOB 1
#define AT91_PIOC 2
OpenPOWER on IntegriCloud