Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 85 insertions, 0 deletions

diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
new file mode 100644
index 0000000..9f7f02c
--- /dev/null
+++ b/include/asm-v850/rte_cb.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_CB_H__
+#define __V850_RTE_CB_H__
+
+
+/* The SRAM on the Mother-A motherboard.  */
+#define MB_A_SRAM_ADDR		GCS0_ADDR
+#define MB_A_SRAM_SIZE		0x00200000 /* 2MB */
+
+
+#ifdef CONFIG_RTE_GBUS_INT
+/* GBUS interrupt support.  */
+
+# include <asm/gbus_int.h>
+
+# define GBUS_INT_BASE_IRQ	NUM_RTE_CB_IRQS
+# define GBUS_INT_BASE_ADDR	(GCS2_ADDR + 0x00006000)
+
+/* Some specific interrupts.  */
+# define IRQ_MB_A_LAN		IRQ_GBUS_INT(10)
+# define IRQ_MB_A_PCI1(n)	(IRQ_GBUS_INT(16) + (n))
+# define IRQ_MB_A_PCI1_NUM	4
+# define IRQ_MB_A_PCI2(n)	(IRQ_GBUS_INT(20) + (n))
+# define IRQ_MB_A_PCI2_NUM	4
+# define IRQ_MB_A_EXT(n)	(IRQ_GBUS_INT(24) + (n))
+# define IRQ_MB_A_EXT_NUM	4
+# define IRQ_MB_A_USB_OC(n)	(IRQ_GBUS_INT(28) + (n))
+# define IRQ_MB_A_USB_OC_NUM	2
+# define IRQ_MB_A_PCMCIA_OC	IRQ_GBUS_INT(30)
+
+/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS.  */
+# define NUM_MACH_IRQS		(NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
+
+#else /* !CONFIG_RTE_GBUS_INT */
+
+# define NUM_MACH_IRQS		NUM_RTE_CB_IRQS
+
+#endif /* CONFIG_RTE_GBUS_INT */
+
+
+#ifdef CONFIG_RTE_MB_A_PCI
+/* Mother-A PCI bus support.  */
+
+# include <asm/rte_mb_a_pci.h>
+
+/* These are the base addresses used for allocating device address
+   space.  512K of the motherboard SRAM is in the same space, so we have
+   to be careful not to let it be allocated.  */
+# define PCIBIOS_MIN_MEM	(MB_A_PCI_MEM_ADDR + 0x80000)
+# define PCIBIOS_MIN_IO		MB_A_PCI_IO_ADDR
+
+/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
+   instead, perversely enough, this becomes always true! */
+# define pci_dma_supported(dev, mask)		1
+# define pci_dac_dma_supported(dev, mask)	0
+# define pcibios_assign_all_busses()		1
+
+#endif /* CONFIG_RTE_MB_A_PCI */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#ifndef __ASSEMBLY__
+extern void rte_cb_early_init (void);
+extern void rte_cb_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_RTE_CB_H__ */