Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 113 insertions, 0 deletions

diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
new file mode 100644
index 0000000..d9df8ac
--- /dev/null
+++ b/include/asm-v850/entry.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ENTRY_H__
+#define __V850_ENTRY_H__
+
+
+#include <asm/ptrace.h>
+#include <asm/machdep.h>
+
+
+/* These are special variables using by the kernel trap/interrupt code
+   to save registers in, at a time when there are no spare registers we
+   can use to do so, and we can't depend on the value of the stack
+   pointer.  This means that they must be within a signed 16-bit
+   displacement of 0x00000000.  */
+
+#define KERNEL_VAR_SPACE_ADDR	R0_RAM_ADDR
+
+#ifdef __ASSEMBLY__
+#define KERNEL_VAR(addr)	addr[r0]
+#else
+#define KERNEL_VAR(addr)	(*(volatile unsigned long *)(addr))
+#endif
+
+/* Kernel stack pointer, 4 bytes.  */
+#define KSP_ADDR		(KERNEL_VAR_SPACE_ADDR +  0)
+#define KSP			KERNEL_VAR (KSP_ADDR)
+/* 1 if in kernel-mode, 0 if in user mode, 1 byte.  */
+#define KM_ADDR 		(KERNEL_VAR_SPACE_ADDR +  4)
+#define KM			KERNEL_VAR (KM_ADDR)
+/* Temporary storage for interrupt handlers, 4 bytes.  */
+#define INT_SCRATCH_ADDR	(KERNEL_VAR_SPACE_ADDR +  8)
+#define INT_SCRATCH		KERNEL_VAR (INT_SCRATCH_ADDR)
+/* Where the stack-pointer is saved when jumping to various sorts of
+   interrupt handlers.  ENTRY_SP is used by everything except NMIs,
+   which have their own location.  Higher-priority NMIs can clobber the
+   value written by a lower priority NMI, since they can't be disabled,
+   but that's OK, because only NMI0 (the lowest-priority one) is allowed
+   to return.  */
+#define ENTRY_SP_ADDR		(KERNEL_VAR_SPACE_ADDR + 12)
+#define ENTRY_SP		KERNEL_VAR (ENTRY_SP_ADDR)
+#define NMI_ENTRY_SP_ADDR	(KERNEL_VAR_SPACE_ADDR + 16)
+#define NMI_ENTRY_SP		KERNEL_VAR (NMI_ENTRY_SP_ADDR)
+
+#ifdef CONFIG_RESET_GUARD
+/* Used to detect unexpected resets (since the v850 has no MMU, any call
+   through a null pointer will jump to the reset vector).  We detect
+   such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
+   this location.  Properly resetting the machine stores zero there, so
+   it shouldn't trigger the guard; the power-on value is uncertain, but
+   it's unlikely to be RESET_GUARD_ACTIVE.  */
+#define RESET_GUARD_ADDR	(KERNEL_VAR_SPACE_ADDR + 28)
+#define RESET_GUARD		KERNEL_VAR (RESET_GUARD_ADDR)
+#define RESET_GUARD_ACTIVE	0xFAB4BEEF
+#endif /* CONFIG_RESET_GUARD */
+
+#ifdef CONFIG_V850E_HIGHRES_TIMER
+#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
+#define HIGHRES_TIMER_SLOW_TICKS     KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
+#endif /* CONFIG_V850E_HIGHRES_TIMER */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_RESET_GUARD
+/* Turn off reset guard, so that resetting the machine works normally.
+   This should be called in the various machine_halt, etc., functions.  */
+static inline void disable_reset_guard (void)
+{
+	RESET_GUARD = 0;
+}
+#endif /* CONFIG_RESET_GUARD */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+   suitable for a function call stack frame.  */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+   C calling conventions, in addition to the space used by the struct
+   pt_regs that actually holds saved values.  */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments.  */
+
+
+#ifdef __ASSEMBLY__
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+#else /* !__ASSEMBLY__ */
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE	       (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
+
+#endif /* __ASSEMBLY__ */
+
+
+/* Offset of the struct pt_regs in a state save frame.  */
+#define STATE_SAVE_PT_OFFSET	STATE_SAVE_ARG_SPACE
+
+
+#endif /* __V850_ENTRY_H__ */