Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 143 insertions, 0 deletions

diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
new file mode 100644
index 0000000..3be77d5
--- /dev/null
+++ b/include/asm-v850/anna.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ANNA_H__
+#define __V850_ANNA_H__
+
+#include <asm/v850e2.h>		/* Based on V850E2 core.  */
+
+
+#define CPU_MODEL	"v850e2/anna"
+#define CPU_MODEL_LONG	"NEC V850E2/Anna"
+#define PLATFORM	"anna"
+#define PLATFORM_LONG	"NEC/Midas lab V850E2/Anna evaluation board"
+
+#define CPU_CLOCK_FREQ	200000000 /*  200MHz */
+#define SYS_CLOCK_FREQ	 33300000 /* 33.3MHz */
+
+
+/* 1MB of static RAM.  This memory is mirrored 64 times.  */
+#define SRAM_ADDR	0x04000000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* 64MB of DRAM.  */
+#define SDRAM_ADDR	0x08000000	
+#define SDRAM_SIZE	0x04000000 /* 64MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The Anna chip has
+   128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
+   every 128K, so we can use the `last mirror' (except for the portion at
+   the top which is overridden by I/O space).  In addition, the early
+   sample chip we're using has lots of memory errors in the dLB ram, so we
+   use a specially chosen location that has at least 20 bytes of contiguous
+   valid memory (xxxF0020 - xxxF003F).  */
+#define R0_RAM_ADDR			0xFFFF8020
+
+
+/* Anna specific control registers.  */
+#define ANNA_ILBEN_ADDR			0xFFFFF7F2
+#define ANNA_ILBEN			(*(volatile u16 *)ANNA_ILBEN_ADDR)
+
+
+/* I/O port P0-P3. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define ANNA_PORT_IO_ADDR(n)		(0xFFFFF400 + (n) * 2)
+#define ANNA_PORT_IO(n)			(*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ANNA_PORT_PM_ADDR(n)		(0xFFFFF410 + (n) * 2)
+#define ANNA_PORT_PM(n)			(*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)	(n)	/* Pnnn (pin) interrupts 0-15 */
+#define IRQ_INTP_NUM	16
+#define IRQ_INTOV(n)	(0x10 + (n)) /* 0-2 */
+#define IRQ_INTOV_NUM	2
+#define IRQ_INTCCC(n)	(0x12 + (n))
+#define IRQ_INTCCC_NUM	4
+#define IRQ_INTCMD(n)	(0x16 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTDMA(n)	(0x1C + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM	4
+#define IRQ_INTDMXER	0x20
+#define IRQ_INTSRE(n)	(0x21 + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x22 + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x23 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void anna_init_irqs (void);
+#endif
+
+
+/* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 2)
+#define V850E_UART_CHIP_NAME 		"V850E2/NA85E2A"
+
+/* This is the UART channel that's actually connected on the board.  */
+#define V850E_UART_CONSOLE_CHANNEL	1
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	anna_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void anna_uart_pre_configure (unsigned chan,
+				     unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
+#define V850E_UART_CTS(chan)	((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
+/* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = ANNA_PORT_IO(0); 			      \
+		   if (val)						      \
+			   ANNA_PORT_IO(0) = old & ~0x80;		      \
+		   else							      \
+			   ANNA_PORT_IO(0) = old | 0x80;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the Anna actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_ANNA_H__ */