sparc: copy sparc64 specific files to asm-sparc

Used the following script to copy the files:
cd include
set -e
SPARC64=`ls asm-sparc64`
for FILE in ${SPARC64}; do
	if [ -f asm-sparc/$FILE ]; then
		echo $FILE exist in asm-sparc
	else
		git mv asm-sparc64/$FILE asm-sparc/$FILE
		printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
		git add asm-sparc64/$FILE
	fi
done

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

1 files changed, 1 insertions, 283 deletions

diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h
index 76e4299..3677a30 100644
--- a/include/asm-sparc64/tsb.h
+++ b/include/asm-sparc64/tsb.h
@@ -1,283 +1 @@
-#ifndef _SPARC64_TSB_H
-#define _SPARC64_TSB_H
-
-/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
- * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
- * pointers into this table for 8K and 64K page sizes, and also a
- * comparison TAG based upon the virtual address and context which
- * faults.
- *
- * TLB miss trap handler software does the actual lookup via something
- * of the form:
- *
- * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
- * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
- *	sllx		%g6, 22, %g6
- *	srlx		%g6, 22, %g6
- * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
- * 	cmp		%g4, %g6
- * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
- * 	 mov		FAULT_CODE_{D,I}TLB, %g3
- * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
- * 	retry
- *
- *
- * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
- * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
- * register which is:
- *
- * -------------------------------------------------
- * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
- * -------------------------------------------------
- *  63 61 60      48 47 42 41                     0
- *
- * But actually, since we use per-mm TSB's, we zero out the CONTEXT
- * field.
- *
- * Like the powerpc hashtables we need to use locking in order to
- * synchronize while we update the entries.  PTE updates need locking
- * as well.
- *
- * We need to carefully choose a lock bits for the TSB entry.  We
- * choose to use bit 47 in the tag.  Also, since we never map anything
- * at page zero in context zero, we use zero as an invalid tag entry.
- * When the lock bit is set, this forces a tag comparison failure.
- */
-
-#define TSB_TAG_LOCK_BIT	47
-#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
-
-#define TSB_TAG_INVALID_BIT	46
-#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
-
-#define TSB_MEMBAR	membar	#StoreStore
-
-/* Some cpus support physical address quad loads.  We want to use
- * those if possible so we don't need to hard-lock the TSB mapping
- * into the TLB.  We encode some instruction patching in order to
- * support this.
- *
- * The kernel TSB is locked into the TLB by virtue of being in the
- * kernel image, so we don't play these games for swapper_tsb access.
- */
-#ifndef __ASSEMBLY__
-struct tsb_ldquad_phys_patch_entry {
-	unsigned int	addr;
-	unsigned int	sun4u_insn;
-	unsigned int	sun4v_insn;
-};
-extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
-	__tsb_ldquad_phys_patch_end;
-
-struct tsb_phys_patch_entry {
-	unsigned int	addr;
-	unsigned int	insn;
-};
-extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
-#endif
-#define TSB_LOAD_QUAD(TSB, REG)	\
-661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
-	.section	.tsb_ldquad_phys_patch, "ax"; \
-	.word		661b; \
-	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
-	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
-	.previous
-
-#define TSB_LOAD_TAG_HIGH(TSB, REG) \
-661:	lduwa		[TSB] ASI_N, REG; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
-	.previous
-
-#define TSB_LOAD_TAG(TSB, REG) \
-661:	ldxa		[TSB] ASI_N, REG; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
-	.previous
-
-#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
-661:	casa		[TSB] ASI_N, REG1, REG2; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
-	.previous
-
-#define TSB_CAS_TAG(TSB, REG1, REG2) \
-661:	casxa		[TSB] ASI_N, REG1, REG2; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
-	.previous
-
-#define TSB_STORE(ADDR, VAL) \
-661:	stxa		VAL, [ADDR] ASI_N; \
-	.section	.tsb_phys_patch, "ax"; \
-	.word		661b; \
-	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
-	.previous
-
-#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
-99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
-	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
-	andcc	REG1, REG2, %g0;	\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
-	cmp	REG1, REG2;		\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_MEMBAR
-
-#define TSB_WRITE(TSB, TTE, TAG) \
-	add	TSB, 0x8, TSB;   \
-	TSB_STORE(TSB, TTE);     \
-	sub	TSB, 0x8, TSB;   \
-	TSB_MEMBAR;              \
-	TSB_STORE(TSB, TAG);
-
-#define KTSB_LOAD_QUAD(TSB, REG) \
-	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
-
-#define KTSB_STORE(ADDR, VAL) \
-	stxa		VAL, [ADDR] ASI_N;
-
-#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
-99:	lduwa	[TSB] ASI_N, REG1;	\
-	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
-	andcc	REG1, REG2, %g0;	\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	casa	[TSB] ASI_N, REG1, REG2;\
-	cmp	REG1, REG2;		\
-	bne,pn	%icc, 99b;		\
-	 nop;				\
-	TSB_MEMBAR
-
-#define KTSB_WRITE(TSB, TTE, TAG) \
-	add	TSB, 0x8, TSB;   \
-	stxa	TTE, [TSB] ASI_N;     \
-	sub	TSB, 0x8, TSB;   \
-	TSB_MEMBAR;              \
-	stxa	TAG, [TSB] ASI_N;
-
-	/* Do a kernel page table walk.  Leaves physical PTE pointer in
-	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
-	 * VADDR will not be clobbered, but REG2 will.
-	 */
-#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
-	sethi		%hi(swapper_pg_dir), REG1; \
-	or		REG1, %lo(swapper_pg_dir), REG1; \
-	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	andn		REG2, 0x3, REG2; \
-	lduw		[REG1 + REG2], REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x7, REG2; \
-	add		REG1, REG2, REG1;
-
-	/* Do a user page table walk in MMU globals.  Leaves physical PTE
-	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
-	 * termination.  Physical base of page tables is in PHYS_PGD which
-	 * will not be modified.
-	 *
-	 * VADDR will not be clobbered, but REG1 and REG2 will.
-	 */
-#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
-	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x3, REG2; \
-	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
-	brz,pn		REG1, FAIL_LABEL; \
-	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
-	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
-	sllx		REG1, 11, REG1; \
-	andn		REG2, 0x7, REG2; \
-	add		REG1, REG2, REG1;
-
-/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
- * If no entry is found, FAIL_LABEL will be branched to.  On success
- * the resulting PTE value will be left in REG1.  VADDR is preserved
- * by this routine.
- */
-#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
-	sethi		%hi(prom_trans), REG1; \
-	or		REG1, %lo(prom_trans), REG1; \
-97:	ldx		[REG1 + 0x00], REG2; \
-	brz,pn		REG2, FAIL_LABEL; \
-	 nop; \
-	ldx		[REG1 + 0x08], REG3; \
-	add		REG2, REG3, REG3; \
-	cmp		REG2, VADDR; \
-	bgu,pt		%xcc, 98f; \
-	 cmp		VADDR, REG3; \
-	bgeu,pt		%xcc, 98f; \
-	 ldx		[REG1 + 0x10], REG3; \
-	sub		VADDR, REG2, REG2; \
-	ba,pt		%xcc, 99f; \
-	 add		REG3, REG2, REG1; \
-98:	ba,pt		%xcc, 97b; \
-	 add		REG1, (3 * 8), REG1; \
-99:
-
-	/* We use a 32K TSB for the whole kernel, this allows to
-	 * handle about 16MB of modules and vmalloc mappings without
-	 * incurring many hash conflicts.
-	 */
-#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
-#define KERNEL_TSB_NENTRIES	\
-	(KERNEL_TSB_SIZE_BYTES / 16)
-#define KERNEL_TSB4M_NENTRIES	4096
-
-	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
-	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
-	 * and the found TTE will be left in REG1.  REG3 and REG4 must
-	 * be an even/odd pair of registers.
-	 *
-	 * VADDR and TAG will be preserved and not clobbered by this macro.
-	 */
-#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-	sethi		%hi(swapper_tsb), REG1; \
-	or		REG1, %lo(swapper_tsb), REG1; \
-	srlx		VADDR, PAGE_SHIFT, REG2; \
-	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
-	sllx		REG2, 4, REG2; \
-	add		REG1, REG2, REG2; \
-	KTSB_LOAD_QUAD(REG2, REG3); \
-	cmp		REG3, TAG; \
-	be,a,pt		%xcc, OK_LABEL; \
-	 mov		REG4, REG1;
-
-#ifndef CONFIG_DEBUG_PAGEALLOC
-	/* This version uses a trick, the TAG is already (VADDR >> 22) so
-	 * we can make use of that for the index computation.
-	 */
-#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-	sethi		%hi(swapper_4m_tsb), REG1; \
-	or		REG1, %lo(swapper_4m_tsb), REG1; \
-	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
-	sllx		REG2, 4, REG2; \
-	add		REG1, REG2, REG2; \
-	KTSB_LOAD_QUAD(REG2, REG3); \
-	cmp		REG3, TAG; \
-	be,a,pt		%xcc, OK_LABEL; \
-	 mov		REG4, REG1;
-#endif
-
-#endif /* !(_SPARC64_TSB_H) */
+#include <asm-sparc/tsb.h>