Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 369 insertions, 0 deletions

diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h
new file mode 100644
index 0000000..780ee7f
--- /dev/null
+++ b/include/asm-sparc/floppy.h
@@ -0,0 +1,369 @@
+/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef check_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define check_region(X, Y)	(0)
+#define request_region(X, Y, Z)	(1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+	volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+	unsigned char (*fd_inb)(int port);
+	void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+#define FLOPPY_MOTOR_MASK         0x10
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun_82072_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82072 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82072;
+	case 7: /* FD_DIR */
+		return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0;
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Oh geese, 82072 on the Sun has no DOR register,
+		 * the functionality is implemented via the AUXIO
+		 * I/O register.  So we must emulate the behavior.
+		 *
+		 * ASSUMPTIONS:  There will only ever be one floppy
+		 *               drive attached to a Sun controller
+		 *               and it will be at drive zero.
+		 */
+		{
+			unsigned bits = 0;
+			if (value & 0x10) bits |= AUXIO_FLPY_DSEL;
+			if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT;
+			set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+		}
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82072 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82072 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82072 = value;
+		break;
+	};
+	return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82077 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82077;
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sun_fdc->dir_82077;
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sun_fdc->dor_82077 = value;
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82077 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82077 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82077 = value;
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static __inline__ void virtual_dma_init(void)
+{
+	/* nothing... */
+}
+
+static __inline__ void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = 0;
+	}
+}
+
+static __inline__ void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static __inline__ void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static __inline__ void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static __inline__ void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy");
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+	char state[128];
+	int tnode, fd_node, num_regs;
+	struct resource r;
+
+	use_virtual_dma = 1;
+	
+	FLOPPY_IRQ = 11;
+	/* Forget it if we aren't on a machine that could possibly
+	 * ever have a floppy drive.
+	 */
+	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+		/* We certainly don't have a floppy controller. */
+		goto no_sun_fdc;
+	}
+	/* Well, try to find one. */
+	tnode = prom_getchild(prom_root_node);
+	fd_node = prom_searchsiblings(tnode, "obio");
+	if(fd_node != 0) {
+		tnode = prom_getchild(fd_node);
+		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+	} else {
+		fd_node = prom_searchsiblings(tnode, "fd");
+	}
+	if(fd_node == 0) {
+		goto no_sun_fdc;
+	}
+
+	/* The sun4m lets us know if the controller is actually usable. */
+	if(sparc_cpu_model == sun4m &&
+	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+		if(!strcmp(state, "disabled")) {
+			goto no_sun_fdc;
+		}
+	}
+	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+	num_regs = (num_regs / sizeof(fd_regs[0]));
+	prom_apply_obio_ranges(fd_regs, num_regs);
+	memset(&r, 0, sizeof(r));
+	r.flags = fd_regs[0].which_io;
+	r.start = fd_regs[0].phys_addr;
+	sun_fdc = (struct sun_flpy_controller *)
+	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+	/* Last minute sanity check... */
+	if(sun_fdc->status_82072 == 0xff) {
+		sun_fdc = NULL;
+		goto no_sun_fdc;
+	}
+
+        if(sparc_cpu_model == sun4c) {
+                sun_fdops.fd_inb = sun_82072_fd_inb;
+                sun_fdops.fd_outb = sun_82072_fd_outb;
+                fdc_status = &sun_fdc->status_82072;
+                /* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */
+        } else {
+                sun_fdops.fd_inb = sun_82077_fd_inb;
+                sun_fdops.fd_outb = sun_82077_fd_outb;
+                fdc_status = &sun_fdc->status_82077;
+                /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */
+	}
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	return (int) sun_fdc;
+
+no_sun_fdc:
+	return -1;
+}
+
+static int sparc_eject(void)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */